• 한국재료학회지
• /
• 제14권4호
• /
• pp.300-306
• /
• 2004

A laser welding has been made between sintered tip of Fe-Co-W and low carbon steel shank for the diamond saw blade. The welding characteristics and formation of defect has been investigated carefully for the weld fusion zone in different welding condition. Full penetration has been observed for the whole range of heat input investigated in the present work. Bead width and under-fill have been increased with the increase of heat input. With increasing of heat input small cavities were decreased while large cavities were increased. The ratio of total cavity area to the entire weld bead area was not changed significantly with change of heat input. Most of cavities were found near the tip, and supposed to be formed from the pore in the tip.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.91-91
• /
• 2005

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.58-67
• /
• 2003

In this study, the formation mechanism of discontinuities in the laser fusion zone of diamond saw blade was investigated. $CO_2$ laser weldings were conducted along the butt between Fe base sintered tip and carbon steel shank with sets of variable welding parameters. The effect of heat input on irregular humps, outer cavity, inner cavity and bond strengh was evaluated. The optimum heat input to have a proper humps was in the range of 10.4~$17.6kJm_{-1}$. With increasing heat input, both outer and inner cavities were reduced. The outer cavity was caused by insufficient refill of keyhole, while inner cavity was caused by trapping of bubble in molten metal. The bubble came from sintered tip and intensive vaporization at bottom tip of the keyhole. A gas formation and low melting point element vaporization were not occurred during welding. We could not find any relationship between bond strength and amount of discontinuities. Because the fracture were occurred in not only sintered tip but also carbon steel shank due to hardness distributions.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.275-281
• /
• 2010

This research's goal is to process directly aspherics with big sagment and thin center thickness. If we can process directly aspherics with big sagment and thin center thickness, we think it greatly helps to reduce the time of developing optical system. We made very thin glass using diamond grinding whetstone regarding the trace of tool and the detailed drawing of tool super precisive aspherics that has 0.46mm center thickness and over $30^{\circ}$ segment, $0.1{\mu}m$ machining accuracy, 15nm surface accuracy. We think this research's result will be effective to open new market because it is applied not only cell phone optical system but also CCTV robot optical system, internet phone optical system. Also we expect to enhance the super strong brittle precisive process's possibility with super precisive processing technique that achieves 0.46mm glass center thickness as first in the world.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.425-431
• /
• 2004

A laser welding was applied between sintered tip of Fe-Co-W and low carbon steel shank for the diamond saw blade. The welding characteristics and formation of defects were investigated carefully for the weld fusion zone in different welding condition. Dendrite arm spacing in weld bead decreased with decrease of heat input. Co and W increased and Fe decreased in the weld fusion zone with increase of the heat input. The corresponding change of composition was observed with the change of beam position. The maximum and total length of crack decreased with increase of the heat input. The crack in weld bead was propagated along the dendrite boundary and was caused mainly by the segregation of constituent during the solidification.

• 한국레이저가공학회지
• /
• 제7권3호
• /
• pp.25-36
• /
• 2004

This study was performed to clarification of the formation of weld discontinuities in the dissimilar laser fusion zone. Welding parameters were beam power of 1300, 1430, 1560, and 1700 W and travel speed of 1, 1.3, and 1.7 m/min. Most cavities in the fusion zone were observed near the tip. Cavities in the fusion zone observed to be formed and grown from pores in the tip. More cavities were formed as the beam position moves to the tip side. Small cavities were decreased but large cavities were increased when the energy input increased. W content in the fusion zone was increased with heat input and as the beam position close to the tip. In the fusion zone, W content in the dendrite boundary was increased with heat input. Considering the propagation path and fracture morphology, cracks were solidification cracking, and were initiated and propagated along the dendrite boundaries. The formation of cracks might be related with the W rich ${\mu}$ phase which was formed in the grain boundaries and dendrite boundaries.

• 패션비즈니스
• /
• 제6권1호
• /
• pp.116-127
• /
• 2002

The hip-hop fashion of the nineteens is just as important in hip-hop as in rapping, breaking, or graffitiwriting to young people. Hip-hop fashions major influences range from martial-arts moves, to street-gang uniforms and paraphernalia. Hip-hop fashion grew and evolved with the subculture. The identification with street-gang culture is important to hip-hop in general and still set the pace for hip-hop fashion. There are things that are necessary fashion components for each segment of hip-hop life. So even prisons are now selling prison clothes. Explaining the look, The rawest street element is a jail element, so the strongest statement is a uniform with shirts and trousers that match perfectly, like a jail piece. Insiders can detect the away of gang and prison culture on the iconography of seemingly innocuous brands. Hip-hop glam is part of an evolution of hip-hop style. Rap's gone luxe, and it is women who are leading the high-fashion charge. They wear in diamonds and fur. Now it is a very glam. Now, many brands are upping their marketing activities through a focus on their women's lines in advertising, and featuring hot celebrities. There is also a lot of rethinking of looks going on. Sexy and tight is emerging as the style of choice in this market and fabrications are becoming more important, as designers refine and upgrade their women's line. The clothes of hip-hop glam were the ordinary with the extraordinary: Designer fur and leather with athletic team jerseys, Nike sneakers, diamond bracelets and mall brands like Guess and Fubu. The hip-hop musician's sporty hip-hop looks has amply young people. The hip-hop looks of baggy jeans, oversized shirts and rugged outerwear have become a part of mainstream fashion. Hip-hop fashion has the characteristics of being sporty. In the 90s, Military look has got one of the fashionable hip-hop fashion style. It does not have inner symbolic meaning or ideology but it only represents a fashion trend and revival fashion. Not only fashion designer but also hip-hop musician selected the trend for hip-hop fashion style.

• 한국의학물리학회지:의학물리
• /
• 제25권1호
• /
• pp.15-22
• /
• 2014

종양부위의 입체적이고 선택적인 치료가 가능해 임상표적부피(clinical target vlume, CTV)에 높은 선량으로 집중조사하고 부작용을 현저히 줄이는 세기조절방사선치료는 치료예후를 향상시키고 있다. 방사선세기조절 치료는 MLC의 개방면적과 개방시간으로 조사면내 플루언스를 조정하므로 소형조사면의 선량이 누적되어 원하는 선량이 조사하게 된다. 따라서 소형조사면과 계층형 조사면의 출력선량계수의 정확성은 곧 Portal MU 결정에 정확성을 더할 수 있고, 종양에 조사되는 선량의 정확성을 향상할 수 있으므로, 이 연구는 Clinac Ex (Varian) $3{\times}3cm^2$에서 $0.5{\times}0.5cm^2$까지 조사면을 선정하였고 방사선은 6 MVX선의 소형조사면의 출력선량계수를 평가하였다. 조사면은 다엽제한기를 $40{\times}40cm^2$로 개방하고 Collimator jaw를 이용한 것과 Collimator를 $10{\times}10cm^2$로 고정하고 다엽제한기에 의한 조사면으로 구분하여 출력선량계수가 결정되었다. 검출기는 유효체적이 $0.01cm^3$이고 내경 2 mm인 CC01 (Scanditronix-Wellope)이온전리함과 SFD 다이오드 검출기(0.6 mmØ, $500{\mu}m$ 두께, Scanditronix-Wellope)와 다이아몬드 검출기(T60003, PTW)와 X-Omat film을 사용하였다. 결과는 다엽제한기 조사면의 출력선량계수는 $3{\times}3cm^2$에서 $0.899{\pm}0.0106$, $2{\times}2cm^2$에서 $0.855{\pm}0.0106$, $1{\times}1cm^2$에서 $0.764{\pm}0.0082$, $0.5{\times}0.5cm^2$에서 $0.602{\pm}0.0399$를 얻었다. Jaw를 $10{\times}10cm^2$로 고정하고 다엽제한기의 조사면의 출력계수는 MLC를 $40{\times}40cm^2$에 jaw에 의한 소형조사면의 것보다 최대 3.8% 높게 나타남을 확인하였다. 따라서 세기조절방사선치료 TPS에는 collimator jaw 보다 다엽제한기 조사면 크기의 출력선량계수가 설정되는 것이 중요함을 의미한다.