• Journal of Microbiology and Biotechnology
• /
• 제28권6호
• /
• pp.957-967
• /
• 2018

A novel $g-C_3N_4$/ZnO/stellerite (CNZOS) hybrid photocatalyst, which was synthesized by coupled hydro thermal-thermal polymerization processing, was applied as an efficient visible-light-driven photocatalyst against Staphylococcus aureus. The optimum synthesized hybrid photocatalyst showed a sandwich structure morphology with layered $g-C_3N_4$ (doping amount: 40 wt%) deposited onto micron-sized ZnO/stellerite particles (ZnO average diameter: ~18 nm). It had a narrowing band gap (2.48 eV) and enlarged specific surface area ($23.05m^2/g$). The semiconductor heterojunction effect from ZnO to $g-C_3N_4$ leads to intensive absorption of the visible region and rapid separation of the photogenerated electron-hole pairs. In this study, CNZOS showed better photocatalytic disinfection efficiency than $g-C_3N_4/ZnO$ powders. The disinfection mechanism was systematically investigated by scavenger-quenching methods, indicating the important role of $H_2O_2$ in both systems. Furthermore, $h^+$ was demonstrated as another important radical in oxidative inactivation of the CNZOS system. In respect of the great disinfection efficiency and practicability, the CNZOS heterojunction photocatalyst may offer many disinfection applications.

• 한국수정란이식학회지
• /
• 제32권1호
• /
• pp.33-38
• /
• 2017

A 10-day-old, Holstein calf with facial mass of 10 cm in diameter at the forehead region referred to Veterinary Medical Teaching Hospital in Chungnam National University. The mass was soft and fluctuating swelling. It had normal skin and hair hanging forward from frontal region and was thought to contain cerebrospinal fluid. On the skull radiography, cauliflower like-irregular marginated, soft tissue opacity mass was identified craniodorsal to the frontal bone. The mass appeared as a cyst filled with anechoic fluid on ultrasonography. Soft tissue structures considered brain tissues were observed in the deep area of the mass. On the computed tomography, a large skull defect of left side frontal bone was found, and heterogeneous materials were exposed through the defect but exposure of cerebral meninges and brain tissue were not confirmative. On magnetic resonance imaging, herniated left brain parenchyma showed heterogenous T2 and T1 hyperinsensity. In the intracranium, T2 hyperinstense and T1 hypointense fluid was identified on the left side, instead of left cerebral parenchyma. Also leftward shift of right hemisphere and midline structure, including thalamus and midbrain, were observed. The definitive diagnosis was confirmed as a meningoencephalocele based on computed tomography and magnetic resonance imaging. The calf was euthanized and necropsy was performed. On necropsy, both hemisphere were developed unequally with different size. One side hemisphere was grown in the outside through 10 cm hole on the median plane.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.

• 한국분무공학회지
• /
• 제3권3호
• /
• pp.33-41
• /
• 1998

In recently, a study on the lean combustion is investigated intensively, because it is expected that this method may decrease the harmful exhaust gas and improve fuel economy in gasoline engine. The problems of lean combustion system in gasoline engine are ignition difficulty, misfire and instability of combustion. The investigation on the optimization of fuel metering and the control of mixing gas flow may be critical to improve the performance of lean combustion. In the fuel injection gasoline engine, the formation of mixture influences strongly on the engine performance such that the importance of fuel metering system becomes apparent. First of all, a study on the fuel breakup characteristics of gasoline fuel injector was carried out in this paper. Fuel injectors are pintle and 4hole-2spray type. The purpose of this study is to clarify the atomization mechanism of spray injected into atomosphere field through electronic controlled-fuel injectors, and to analyze spray characteristics such as drop size distribution and mean drop diameter produced at fuel injector. In this paper, the spray development is observed by taking photograps using 80mm still-camera system, and drop sizes are measured by PMAS. From these experiment, spray pattern injected from gasoline fuel injectors was investigated clearly. Also, it was found that SMD and drop size distribution of injected fuel spray from gasoline fuel injectors.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.373-379
• /
• 2010

EMAT는 비접촉식 탐촉자인 동시에 모드 선택성이 우수하여 다양한 분야에 적용되고 있으나 근본적으로 에너지 전환효율이 낮아 신호 대 잡음비의 증가에 한계를 보인다. EMAT에 위상배열 기술을 접목하면 초음파의 집속 효과를 얻을 수 있으므로 낮은 전환효율의 문제를 극복하기 위한 하나의 해결방안이 될 수 있을 것으로 판단한다. 본 연구에서는 위상배열 EMAT에 대한 기초연구로 3~4개의 코일로 구성되는 표면파 및 수직횡파 발생용 위상배열 EMAT를 제작하고 각 요소코일에 공급하는 펄스의 지연으로부터 위상배열의 효과를 확인하고 방향특성을 측정하였다. 또한 시험편의 표면에 0.5 mm 깊이의 표면결함과 시험편 내부에 직경 0.5 mm의 측면 드릴 홀을 가공하여 제작된 위상배열 EMAT로 결함 신호를 검출하였으며, 이로부터 제작된 EMAT의 성능을 평가하였다.

• 천문학논총
• /
• 제38권1호
• /
• pp.1-12
• /
• 2023

Numerous Sundials were fabricated during the reign of King Sejong of the Joseon Dynasty. One among them is Jeongnam-Ilgu (the Fixing-South Sundial), where the time can be measured after setting up the suitable meridian line without a compass. We reconstructed the new Jeongnam-Ilgu model based on the records of 'Description of Making the Royal Observatory Ganui (簡儀臺記)' in the Veritable Record of King Sejong. Jeongnam-Ilgu has a summer solstice half-ring under a horizontal ring which is fixed to two pillars in the north and south, and in which a declination ring rotates around the polar axis. In our model, the polar axis matches the altitude of Hanyang (that is Seoul). There are two merits if the model is designed to install the polar axis in the way that enters both the north and south poles and rotates in them: One is that it is possible to fix the polar axis to the declination ring together with the cross-strut. The other is that a twig for hanging weights can be protruded on the North Pole. The declination ring is supposed to be 178 mm in diameter and is carved on the scale of the celestial-circumference degrees on the ring's surface, where a degree scale can be divided into four equal parts through the diagonal lines. In addition, the time's graduation that is drawn on the summer solstice half-ring makes it possible to measure the daytime throughout the year. An observational property of Jeongnam-Ilgu is that a solar image can be obtained using a pin-hole. The position cast by the solar image between hour circles makes a time measurement. We hope our study will contribute to the restoration of Jeongnam-Ilgu.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.597-607
• /
• 2004

Purpose: This study was peformed to investigate the retrievability of the cemented crown from the cementation type implant abutment. Material and method: The cementation type implant abutments (NEOBIOTECH implant abutment regular, 3 degree taper, 10mm length, 4mm diameter, Ti grade III, machined surface. Hwasung, Kyunggi-do) and cemented crowns were divided into 3 groups, depending on their hole angles formed in the crowns for their retrievability. The abutments and crowns were luted with 4 kinds of cements and separation test using metal wedge was executed with Instron 4465 Universal Testing Machine and the maximum impact force of the modified crown ejector was measured. Results and conclusion : 1. All of the cementation type implant abutments and cemented crowns were separated with relatively small force by metal wedge. 2. The retrieving force was minimum when the metal wedge was applied perpendicular to the axis of abutment. 3. The force for retrieving crowns from abutments was maximum in resin cement group, and reduced in orders of zinc phosphate cement, glass ionomer cement and zinc oxide eugenol cement. 4. The maximum force obtained by the crown ejector was higher than the retrieval force in ZOE and GI cement and lower than that in ZPC and resin cement. 5. If it has similar conditions clinically, the cemented crowns luted with 2 types of cements (ZOE, GI cement) can be safely retrieved from the cementation type implant abutments by the modified crown ejector.

• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1151-1159
• /
• 2012

본 논문에서는 노즐홀 직경을 확대하여 유량을 증가시킨 DME 인젝터의 가시화 실험과 분무 해석을 수행하였다. 해석의 신뢰성을 확보하기 위하여 가시화 실험과 분무해석을 비교하였고, 실엔진 모사 조건에서 분무 해석을 수행하여 DME의 거동을 예측하였다. 분사 압력과 분위기 압력이 각각 35MPa 및 5MPa인 경우 가시화 실험과 분무 해석의 도달거리는 3.57%의 차이를 나타내었다. 실엔진 모사 해석의 경우, 완전하게 발달된 DME의 분무 도달거리는 분위기 온도와 압력의 비가 300K/MPa에서 42mm로 최대를 나타내었고, 300K/MPa미만의 영역에서 DME의 분무는 분위기 압력, 300K/MPa초과의 영역에서는 분위기 온도의 영향이 지배적임을 확인하였다.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1931-1940
• /
• 1996

The effect of periodic passing wake on the film-coolant flow issuing normally from a flat plate was investigated experimentally. The passing wake was generated by rotating thin circular bars. Depending on the rotational direction the test plate could be simulated as a pressure surface or a suction surface of a gas turbine blade. The phase-averaged velocity components were measured using an X-type hot-wire probe. The Reynolds number based on the free-stream velocity and injection hole diameter was 23, 500 and the velocity ratio which is the ratio of film coolant velocity to free-stream velocity was 0.5. The velocity-triangle induced by the wake was similar to that induced by the one generated at the blade trailing edge. The vertical velocity component induced by the passing wake, which approaches to the suction surface and moves away from the pressure surface, played a dominant role in the variation of the flow field. The variation in the phase-averaged velocity on the pressure surface was greater than on the suction surface, but the turbulence kinetic energy variation on the suction surface appeared larger than on the pressure surface.

• 공업화학
• /
• 제9권5호
• /
• pp.674-679
• /
• 1998

액체금속로 증기발생기 전열관 재질로 사용이 예상되는 ferrite steel 시편을 사용해서 소듐분위기에서 미량의 물 누출 실험을 수행하였다. 누출경로는 소듐-물 반응생성물 및 부식생성물에 의한 self-plugging 현상과 열적인 transient 및 전열관의 vibration에 의한 re-opening 메카니즘으로 설명이 가능하였다. 실험결과, 600 Psig의 injection 압력으로 5 g $H_2O$를 소듐분위기 속의 시편으로 누출시킨 경우, 누출초기와 약 70분 경과 후에 약간의 누출 흔적이 보였으나, self-plugging되었던 누출경로는 129분이 경과되자 완전 re-opening된 것으로 확인되었다. 누출시편의 re-opening shape은 2중으로 되어 있었으며, 소듐부위에서 시편 표면에 나타난 re-opening size 약 2 mm의 직경을 나타내었다.