• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.62-67
• /
• 2012

To realize 2-dimensional vibrational micro cutting in milling and drilling, etc. where the tools rotate, it could be a promising way to vibrate a workpiece instead of a rotating tool itself. In this study, an excitation work-table was developed using two piezoelectric materials orthogonally arranged. The trochoidal trajectory of a cutting tool which is necessary for 2D vibrational cutting is enabled in the excitation condition of higher excitation frequency and larger amplitude of vibration and the cutting condition of smaller diameter of cutting tool and lower spindle speed. The various trochoidal trajectories of a cutting tool could be generated in the excitation work-table by adjusting the input voltages to two piezoelectric materials and the phase between the two voltages and the trajectories could be readily used for the 2D vibrational micro cutting.

• 한국정밀공학회지
• /
• 제6권2호
• /
• pp.65-76
• /
• 1989

The objective of this paper is to design the variable structure system(VSS) controller for the tracking control of excavator which is driven by electro-hydraulic servomechansim. It is generally agreed that the dynamic characteristics of the robot arm such as excavator are coupled, time varying, and highly nonlinear, and also hydraulic system contains nonlinear characteristics in itself, so performing exact position control and trajectory tracking control need remarkable consideration. To solve this porblem, this system was designed as a variable structure system. The salient feature of VSS is that the sliding mode occur on a switching surface. While in sliding mode, the system remains insensitive to parameter variations and disturbances. This control algorithm was applied to a hydraulic excavator by simulaltion and to a simulator by experiment. And its effectiveness was verified. And the results of VSS for the electro-hydraulic excavator was compared with that of the PID when load disturbances and system parameter variations exist.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.716-719
• /
• 1997

This paper describes the runner and gate design capabilities of the RAMEDS system, which is a specialized CAD system for injection mold design, dcvcloped using the application procedure interface of the Unigraphics system. In this system, runners lying on sculptuted partlng surface can be modeled by projecting the runner trajectory on the surface and sweeping a selected cross section along the projcctcd trajectory. In addtion, the system provides solid modeling capabilities for three types of gates currently.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.170-179
• /
• 2004

A vibration model of powder transfer equipment is developed by the lumped parameter method. A Powder transfer equipment does surging motion, bouncing motion and pitching motion. Motion equation becomes decoupling and removed vibration exciting source about pitching motion, and therefore designers presented the optimum design plan to be able to do adjustment with motion trajectory of powder transfer equipment. That is, way for design to be able to do motion trajectory of powder transfer equipment through change of design element as installation position and direction of motor, driving speed, mass unbalance, stiffness coefficient and installation position of support coil spring is presented. The design results, powder transfer equipment were able to know that fatigue destruction does not occur, and the reason is because maximum stress working on a basket structure is more very than fatigue strength small.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.942-950
• /
• 2011

Automation is important in modern agricultural environment, which demands the highest level of technology. In the paper an independent four-wheel steering driving platform is developed especially for horticulture in glass house farm. Mathematical modeling of the four wheel system is carried out for smooth movement. The relationships between steering angle, the turning radius, and escape trajectory are simulated using the dynamic analysis program. Optimal driving algorithm is sought through the performance evaluation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.60-65
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.382-390
• /
• 2009

This paper newly proposes a modular type dynamic encoding algorithm for searches (DEAS) which partitions the whole parameters into several modules and carries out exhaustive DEAS for each module. uDEAS is used to measure parameter sensitivities to the cost function, and the variables whose sensitivities are similar are grouped to make a module. The proposed optimization method is applied to optimal trajectory generation for biped walking of a humanoid. and the optimization result is compared with those of the former versions of DEAS.

• 융합신호처리학회논문지
• /
• 제3권1호
• /
• pp.61-66
• /
• 2002

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used for the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and the second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined parallel fuzzy controller. The effectiveness of proposed scheme is demonstrated through computer simulation.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제24권2호
• /
• pp.83-109
• /
• 2021

In the early stage of lesson enactment process, teachers use textbooks and other resources to select tasks and activities. It follows that discrepancies between textbooks and research-recommended pathways for learning may lead to concerns or issues with pacing in the classroom. To explore this idea further, this study examined the alignment between three popular standards-aligned textbooks series and volume learning trajectories. The results indicated that the standards-based textbooks examined may lack attention to important topics in the pacing of volume instruction, and suggest the need to inform both pre-service and in-service teachers about the gap between textbook lessons and volume learning trajectories so that they will be able to reflect students' thinking in volume learning trajectory to their lessons.

• 전자통신동향분석
• /
• 제36권2호
• /
• pp.1-11
• /
• 2021

As sensors such as Inertial Measurement Unit, cameras, and Light Detection and Rangings have become cheaper and smaller, research has been actively conducted to implement functions automating micro aerial vehicles such as multirotor type drones. This would fully enable the autonomous flight of drones in the real world without human intervention. In this article, we present a survey of state-of-the-art development on autonomous drones. To build an autonomous drone, the essential components can be classified into pose estimation, environmental perception, and obstacle-free trajectory generation. To describe the trend, we selected three leading research groups-University of Pennsylvania, ETH Zurich, and Carnegie Mellon University-which have demonstrated impressive experiment results on automating drones using their estimation, perception, and trajectory generation techniques. For each group, we summarize the core of their algorithm and describe how they implemented those in such small-sized drones. Finally, we present our up to date research status on developing an autonomous drone.