• Journal of Advanced Marine Engineering and Technology
• /
• 제19권4호
• /
• pp.72-78
• /
• 1995

The diffusion of fuzzy logic techniques into real applications requires specific software supports which save development time and reduce the programming effort. But we has been lack of a tool devoted to support the design of fuzzy controllers. In this paper, on the basis of the general fuzzy set and .alpha.-cut set decomposition of fuzzy sets, a set of fuzzy reasoning tool(FRT) devoted to support the design of fuzzy dontroller for servo systems is developed. The major features of this tool are: 1) It supports users to analyze fuzzy ingerence status based on input deta and expected results by three-D graphic display. 2) It supports users to prepare input data and expected result. 3) It supports users to tuned scaling factor of membership functions, rules and fuzzy inference. The paper shows how the suggested design tools are suitable to give a consistent answer to the tuning of fuzzy control system. This FRT is expected to exert good performance and devoted to support which the design of fuzzy controller is illustrated in the servo systems.

• Proceedings of the CALSEC Conference
• /
• 한국전자거래학회 1999년도 학술대회지 vol.2
• /
• pp.607-614
• /
• 1999

In this paper, we demonstrate the implementation case using component based development tool under development process for application developments. The tool suggested provides the programming environment for the development of distributed manufacturing applications primarily. The development tool is classified into visual component, logic component, data component, knowledge component, neural net component, and service component which is a core component for the support component edit and execution. We applied the tool to the domain of the design and routing plan to retrieve existing similar design models in database, initiate a model, generate a process plan, and store the new model in the database automatically. Utilizing the tool, it integrates a geometric modeler, engineering/manufacturing database, and knowledge sources over the Internet.

• Journal of KIISE:Software and Applications
• /
• 제30권9호
• /
• pp.812-820
• /
• 2003

Component-Based Development(CBD) leverages software reusability and diminishes development costs. Various works about component models, such as EJB, COM, and CCM are in progress to support CBD. However, current component models hardly support flexible assembly of pre-built components. To cope with this problem, architecture for component assembly must be defined in the abstract level and the gap between system architecture and its implementation should be diminished in the implementation level. This paper proposes a method for architecture-based design and implementation of component assembly. Architecture is described by the ADL, and the tool, COBALT Assembler, is introduced to support the proposed design and implementation phase of component assembly.

• Journal of Navigation and Port Research
• /
• 제38권4호
• /
• pp.385-390
• /
• 2014

Simulator is composed of several devices that have a variety of forms and functions. These devices are connected to each other by a network intricately. For this reason, simulator development and maintenance process require a lot of time and money. In order to successfully develop the simulator, it is ideal that related professionals share the work and work together in parallel. However, development is carried out inefficiently, because task interdependence makes it difficult to work in parallel. In this paper, the developments of the simulator were classified into algorithm development and system development, and it was discussed how to lower the interdependence of these two tasks and support professionals. In particular, based on the requirements analysis of the domain experts responsible for the development of the algorithm, we designed the support tool for simulator development and proposed development process using this tool. We also introduced the concept of a DataSet in order to support algorithm development of domain experts and manage data flexibly. And we designed network architecture to enable flexible reconfiguration of simulator equipment. By using the tools to support the simulator development, domain experts are able to concentrate on algorithm development and it is expected to be effective collaboration. In addition, the development plan and management are expected to be easy because the development process is systematic and clearer.

• KIPS Transactions on Software and Data Engineering
• /
• 제2권6호
• /
• pp.377-382
• /
• 2013

A convergence software development methodology based on product line engineering provides an architecture model for application development and it also provides workflow as a behavior specification of control component development to develop transaction centric application. To effect a change on software development based on product line engineering it has to be supported by a tool. But almost workflow modeling tools dose not support product line engineering concept. So we need new workflow modeling tool to support the convergence software development methodology. In this paper, we introduce a toolset for workflow modeling that consists of eclipse plug-in applications and open source tool and describe the relationships of tools through example.

• The Transactions of the Korea Information Processing Society
• /
• 제2권5호
• /
• pp.721-732
• /
• 1995

The IPSE(Integrated Project Support Environment) tool can be seen as a result of an attempt to synthesize the key aspects of language-centered, specific methodology-based and toolkit oriented environments, which are current CASE tools into an organic whole. The IPSE approach based on a process model is regarded as an effective way to implement integrated CASE. The PM-CASE(Process Model based CASE) tool is currently a prototype which draw diagrams describing processes by using a new modeling technique. Attributes related with a task of withen the process model should be defined an saved the database. These attributed are used to retrieve the information of products, and to call the tool related which the task. In this paper, TSEE(Process centered Software Engineering Environment) tools are compared and analyzed. By describing the basic concept, architecture and design of PM-CASE tool, a method of building an process model-based CASE tool is proposed be support an effect software development and management.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제44권3호
• /
• pp.117-124
• /
• 2021

The development of IOT technology and artificial intelligence technology is promoting the smartization of manufacturing system. In this study, data extracted from acceleration sensor and current sensor were obtained through experiments in the cutting process of SKD11, which is widely used as a material for special mold steel, and the amount of tool wear and product surface roughness were measured. SVR (Support Vector Regression) is applied to predict the roughness of the product surface in real time using the obtained data. SVR, a machine learning technique, is widely used for linear and non-linear prediction using the concept of kernel. In particular, by applying GSVQR (Generalized Support Vector Quantile Regression), overestimation, underestimation, and neutral estimation of product surface roughness are performed and compared. Furthermore, surface roughness is predicted using the linear kernel and the RBF kernel. In terms of accuracy, the results of the RBF kernel are better than those of the linear kernel. Since it is difficult to predict the amount of tool wear in real time, the product surface roughness is predicted with acceleration and current data excluding the amount of tool wear. In terms of accuracy, the results of excluding the amount of tool wear were not significantly different from those including the amount of tool wear.

• Quality Improvement in Health Care
• /
• 제5권2호
• /
• pp.224-237
• /
• 1998

Background : This is an investigative study to analyse the importance of works perceived by Quality Improvement(QI) Coordinators and to evaluate their current work performances using the questionnaires developed by the investigator. Methods : The data were collected from 37 subjects over two weeks period from Oct. 1 to Oct. 17, 1998 and analysed by the descriptive statistics of SPSS program. The items of questionnaire are consisted of 13 work domains including 73 activities based on Quality Management(QM) Coordinator's job description of National Association for Healthcare Quality:data collection & analysis, communication, monitoring, evaluation, accreditation, tool development, policy development, program development, self development, education & trainning, system design, planning, and consultation & support. Results : 1) Of the performances in 13 work domains, the frequencies of the work performed were accreditation(89%), planning(88%), communication(83%), data collection & analysis(82%), monitoring(76%), policy development(72%), consultation & support (71%), education & trainning(70%), self development(68%), evaluation(63%), tool development(61%), program development(44%) and system design(43%) in order. 2) For the importances (1=not important, 5=very important), the policy development(4.46) scored highest then monitoring(4.42), planning(4.41), education & trainning(4.38), communication(4.35), evaluation(4.34) tool development (4.30), data collection & analysis(4.29), program development(4.22), consultation & support(4.22), accreditation(4.15), self development(4.05) and system design(3.98) in order. 3) There was a difference between the work performance and the perceived importance. The results showed the low performances in policy development, monitoring, education & trainning and evaluation which ranked high by the perceived importance and the high performances in accreditation, data collection & analysis, self development, communication and consultation & support which ranked middle to low by the perceived importance. 4) The reasons for low performances of QI Coordinators were the lack of clear assignment for the responsibility and allowed authority for work to QI Coordinators(30.8%), insufficient member of QI Coordinators(13.9%), lack of hospital director's interest(11.5%), low motivation of QI Coordinators (10.6%) and insufficient knowledge & experience of QI Coordinators (8.8%). Conclusion : Most works were perceived important by QI Coordinators, but there was a difference in the work performance. The works performed over 70% were related with accreditation, data collection & analysis, communication, planning and monitoring, on the other hand under 50% in performances were related with system design, program development, tool development and evaluation.

• Journal of Korea Technology Innovation Society
• /
• 제20권1호
• /
• pp.81-102
• /
• 2017

Financing, manpower support and tax are the most popular tools for policy for small and medium enterprises (SMEs). This paper, however, will introduce information analysis support for SMEs and will prove that can be a good tool. The information analysis support means the support of technology and market information for the technology development or commercialization of SMEs. Therefore, the support is a customized one. In the theory domain, we adopt and prove two theoretical grounds as an SMEs policy such as market and system failure. In the policy tool domain, we suggest four requirements to be an SMEs policy and prove the tool to satisfy these requirements. All the data and proofs are from a government research institute called K.

• Journal of the Korean Operations Research and Management Science Society
• /
• 제20권3호
• /
• pp.77-104
• /
• 1995

Intelligent Decision System support the decision analysis process in the managerial problems with decision analytic knowledge as well as domain specific knowledge. Influence Diagram has been one of the major knowledge representation in the intelligent decision system. In the development of intelligent decision system, knowledge acquisition is also known to be difficult. This paper suggests a developing tool using an influence diagram and Verbal Protocol Analysis which facilitates knowledge acquision for intelligent decision system. An ennvironmental decision making problem is used as an illustrative example and validation of the suggested developing tool is discussed. The suggested tool is very flexible to be expanded or applied to similar problems.