• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2744-2751
• /
• 1996

In case of limited power supply, a rotating shaft system may not reach its operating speed that is greater than its critical speed, but the speed oscillates with small ampllitude near critical speed. As a result, it is considered that the operating mode plays an important role in the smooth start of machines. In order to investigate the dynamic behaviors of the rotating shaft system at the beginning stage, one has derived the equations of motion whose degrees of freedom is three, two translations and one rotation. The simultaneous differential equations are numerically solved by using runge-Kutta method, and thus the small time step length could be required corresponding to the stability of solution. Three types of operating modes dependent upon the driving torque rate have been numerically investigated according to the maximum displacement of shaft center. The first type of relation is linear, the second type is composed of two linear curves recommended by machine manufacturer, and the last one is the proposed torque curve reflecting the frequency response curve of one degree of freedom system. For the second type of modes, it is found that the optimal range of intermediate speed to the critical speed lies between 0.8 and 0.9. In addition to that, the maximum displacement can be reduced more if the third type of mode is utilized.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.409-416
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle, which consisted of the rear driving, the front steering and the console units, was designed and tested in the ideal indoor conditions. Results of this study were summarized as following: 1. The driving unit was designed to travel at the speed ranges of 0.3∼0.8 m/sec depending on the operating modes with a maximum payload of 100 kg. 2. The console unit consisted of a main-board including a 80C196KC microprocessor and peripheral devices, a power-board and safety interlock. Worker-leading, and following modes were available in automatic and manual modes. 3. Steering was achieved by turning the steering motor against the sensed direction. Proper steering angles for correcting travel direction were determined as 5 and 9 degrees when sensing cultivation beds and plants, respectively.

• 한국컴퓨터정보학회논문지
• /
• 제11권5호
• /
• pp.1-8
• /
• 2006

효율적인 네트워크 운용을 위해 트레픽를 측정하는 일은 중요하다. 흔히 용량(capacity)은 트레픽 부하가 없을 때 경로가 제공할 수 있는 최대처리량 또는 경로상의 모든 링크 간의 최소 전송율로서 정의된다. Pathrate는 현재 가장 널리 사용되는 네트워크 용량 측정 도구 중의 하나로써 네트워크의 일시적인 부하에 관계없이 정확한 측정을 할 수 있고 수년간의 개발과 보완으로 성능도 안정되어 있다. Pathrate에서의 Local Mode 검출에는 통계적 방법이 사용되는데 본 논문에서는 ASH(Averaged Shifted Histogram)을 이용한 Local Mode 검출 알고리즘을 제시하고, 구현을 통해 기존의 방법보다 더 나은 결과를 얻었음을 보였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.3-17
• /
• 2003

This paper deals with the problems and their possible solutions in the development of finite element for analysis of shell. Based on these solution schemes, a series of flat shell elements are established which show no signs of membrane locking and other defects even though the coarse meshes are used. In the element formulation, non-conforming displacement modes are extensively used for improvement of element behaviors. A number of numerical tests are performed to prove the validity of the solutions to the problems involved in establishing a series of high performance flat shell elements. The test results reveal among others that the high accuracy and fast convergence characteristics of the elements are obtainable by the use of various non-conforming modes and that the ‘Direct Modification Method’ is a very useful tool for non-conforming elements to pass the patch tests. Furthermore, hierarchical and higher order non-conforming modes are proved to be very efficient not only to make an element insensitive to the mesh distortion but also to remove the membrane locking. Some numerical examples are solved to demonstrate the validity and applicability of the presented elements to practical engineering shell problems.

• Structural Engineering and Mechanics
• /
• 제6권1호
• /
• pp.41-61
• /
• 1998

A state-of-the-art report on the new finite elements formulated by the addition of nonconforming displacement modes has been presented. The development of a series improved nonconforming finite elements for the analysis of plate and shell structures is described in the first part of this paper. These new plate and shell finite elements are established by the combined use of different improvement schemes such as; the addition of nonconforming modes, the reduced (or selective) integration, and the construction of the substitute shear strain fields. The improvement achieved may be attributable to the fact that the merits of these improvement techniques are merged into the formation of the new elements in a complementary manner. It is shown that the results obtained by the new elements give significantly improved solutions without any serious defects such as; the shear locking, spurious zero energy mode for the linear as well as nonlinear benchmark problems. Recent developments in the transition elements that have a variable number of mid-side nodes and can be effectively used in the adaptive mesh refinement are presented in the second part. Finally, the nonconforming transition flat shell elements with drilling degrees of freedom are also presented.

• 전산구조공학
• /
• 제10권2호
• /
• pp.179-188
• /
• 1997

본 논문에서는 평판 구조물의 효율적인 해석을 위한 4절점 평판휨 요소를 개발하였다. 이 요소는 전단변형을 고려하기 위해 Mindlin평판이론에 의하여 유도하였다. 평판휨 문제에서 4절점요소와 같은 저차의 등매개변수 Mindlin평판요소는 전단강성을 실제보다 강하게 평가하기 때문에 얇은 평판에서는 요소의 기능을 발휘하지 못한다. 이러한 문제점을 극복하기 위해 4절점 요소에 5개의 비적합변위모드를 추가함으로써 개선된 결과를 얻을 수 있었으며, 개발된 요소는 유사영에너지모드를 발생시키지 않는다. 아주 얇은 평판에서도 요소의 형상과 무관하게 전단구속현상을 극복하였으며, 예제 해석으로부터 변위의 신속한 수렴성과 단면력의 분포가 양호한 결과를 얻을 수 있었다. 또한 요소형상비가 매우 큰 경우에도 좋은 결과를 얻을 수 있었다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.531-542
• /
• 2021

The study aims to investigate differences between men and women in influence of various socio-demographic factors on choice of mode of transport. For this purpose, a binary logit model of choice probabilities is implemented on survey data of a developing country city. Results indicate women's choice of travel mode to be more environment-friendly than that of men. Well-educated, working and middle-aged individuals appear to be the most likely to choosing more-polluting modes of transport for frequent travelling purposes. Individuals in the sample who are the least socioeconomically well off are found the most likely to be promising for the environment. The findings of this study suggest the future transportation policies toward development of existing infrastructure of greener modes of transportation in the city such as, public transportation services and pedestrian lanes, so as to manage the rising issues of degrading environmental quality. The study highlights how the consideration and inclusion of socio-demographic factors is crucial for policy recommendation regarding curtailing the environmental damages contributed by transportation sector. Because mobility crucially affects all other indicators of empowerment, and women are the ones using green modes extensively, the city's transportation system should be so developed which gives their safety and security due importance.

• Structural Engineering and Mechanics
• /
• 제83권1호
• /
• pp.123-134
• /
• 2022

The stability of cable-stayed bridges is an important factor considered during design. In recent years, the novel spatial diamond-shaped bridge pylon has shown its advantages in various aspects, including the static response and the stability performance with the development of cable-stayed bridge towards long-span and heavy-load. Based on the energy approach, this paper presents a practical calculation method of the completed state stability of a cable-stayed bridge with two spatial diamond-shaped pylons. In the analysis, the possible transverse buckling of the girder, the top pylon column, and the mid pylon columns are considered simultaneously. The total potential energy of the spatial diamond-shaped pylon cable-stayed bridge is calculated. And based on the principle of stationary potential energy, the transverse buckling coefficients and corresponding buckling modes are obtained. Furthermore, an example is calculated using the design parameters of the Changtai Yangtze River Bridge, a 1176 m cable-stayed bridge under construction in China, to verify the effectiveness and accuracy of the proposed method in practical engineering. The critical loads and the buckling modes derived by the proposed method are in good agreement with the results of the finite element method. Finally, cable-stayed bridges varying pylon and girder stiffness ratios and pylon geometric dimensions are calculated to discuss the applicability and advantages of the proposed method. And a further discussion on the degrees of the polynomial functions when assuming buckling modes are presented.

• 영어영문학
• /
• 제56권4호
• /
• pp.575-596
• /
• 2010

The modes of narratives and communication have expanded due to social and cultural changes and technological development. Thus texts have become multimodal and media hybridities and media crossover have been increasing as well. Multimodality requires new literacy to understand and interpret those multimodal texts other than existing traditional literacy approaches. The New London Group (2000) argues that multiliteracies are needed to serve today's changing multimodal texts. Kress (2003) also argues, visual texts have been prevailing, being mingled with other modes of texts such as linguistic, audio, gestural, and spatial modes. Literary texts are not exception in this trend of multimodality. The recent renaissance of comics, in particular, the new light on graphic novels can be interpreted in this historical vein. In comparison to comics, no consensus has been made in defining graphic novels, however, many studies have been recently conducted in order to look into the potential of graphic novels in building multiliteracies. In this paper, the graphic novel as a literary genre are explored from a histocial perspective and the definition of graphic novels was attempted to be made. In the light of multiliteracies, this paper presented cases that show how graphic novels can be utilized to build multiliteracies. Lastly, the use of graphic novels for English as a foreign language was introduced as well. The author hopes that at the age of multimodality, the potential graphic novels have in language and literacy education can be taken into account by language teachers and students in expanding their territory of literacy.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.69-75
• /
• 2019

Remotely Piloted Aircraft (RPA) controls as a type of unmanned aerial vehicle (drone) is growing rapidly and its flight controller stick disposition is required standardization. We should standardize RPA drone flight control disposition because the flight pilot of RPA is hard to be trained so the flight controller stick differences impairs safety and wastes time and effort of flight controller industry. So this study researches the on-going standardization of RPA drone flight control disposition in Korea and foreign countries. Also this paper analyzes and researches of expert about RPA drone flight controller function and application of flight control mode. I accomplished expert research about standardization plan of unmanned flight control mode and confirm the necessity. Nowadays mode1 and 2 are mostly used in Korea so I carried out preference investigation for two modes. There were 4 preferences choices of RPA drone control mode necessity (importance) and recommendation of standardization modes. They answered that necessity of standardization is important considering pilot training, flight safety and positive development of drone industry. The result of standardization mode preference is that they prefer mode 2 (drone maker 86%, training facilities and research facilities 58%, government bureau 60%). Overall preference result shows that mode 1 24%, mode 1&2 16%, mode 2 60%. So they preferred mode 2 by 60%. The differences between two modes are the direction of throttle and pitch. Direction of throttle and pitch operate opposite way. They prefer mode 2 because mode 2 has similarities of manned flight control mode. Significance of this study is that it showed the necessity of standardization and flight control preference in a quantitative way. It will help drone standardization in related industries and development direction near future.