• KIEE International Transactions on Power Engineering
• /
• v.11A no.4
• /
• pp.45-50
• /
• 2001

The impact evaluation of a DSM program is a very important issue since the results are used to determine the sustainability of a program. In general. to estimate the impacts of a DSM program it is required to measure the electricity usage changes before and after a program. Since the measurement-based approaches cost highly, most of the conventional evaluations are based on the average figures. However estimation of the average-based impacts can lead to both distorted results of over/under estimation of kW and kWh savings and non-optimal DSM planning. In this paper, we have developed a new multi-point measurement approach which can evaluate kW and kWh savings of a DSM program more exactly. To do this, the saving rate and operating rate are defined and set as the function of load factor of a customer, and these rates are incorporated with the conventional diffusion function of Bass to project the future impacts of a DSM program. The case study is performed on the inverter program of Korea by using the suggested approach.

• Women's Health Nursing
• /
• v.10 no.3
• /
• pp.252-260
• /
• 2004

Purpose: This study was done to develop a sexual health education program for unmarried mothers that were intended to provide the correct sexual knowledge, to help them establish positive sexual perception and to improve sexual health. The program was applied and its effect was evaluated. Method: One group pretest-posttest quasi-experimental research design was applied to evaluate the effect of a sexual health education program unmarried mothers. The research team developed a 34 hour program of 16 units, where the basic schemes were human development, relationships, personal skills, sexual behavior, sexual health, and society & culture. We applied the program to 32 unmarried mothers in the Institute for unmarried mothers in Gangwon-do, Korea from April 19, 2004 to June 14, 2004. Result: After the application of an 8 week sexual health education program, the subjects significantly showed a better perception of self-efficiency, self-esteem, sexual knowledge and sexual behavior than before the program. Conclusion: The sexual health education program for unmarried mother in this study was effective on improving sexual perception and promoting sexual health behavior.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.19 no.1
• /
• pp.122-133
• /
• 2012

Purpose: The purpose of this study was to develop a web-based education program on control vancomycin-resistant enterococci (VRE) infections and to identify the effects of the program on knowledge and performance of nursing students. Methods: The web-based VRE infection control education program was developed by using the network-based instructional systems design model. The nursing students in the experimental group could access this web-based education program at any time, and as many times as they wanted, during the clinical training period. Effects were evaluated by assessing knowledge and performance of VRE infection control measures during the clinical training period. Results: The contents of the education program included diagnosis, transmission, and treatment of VRE, contact precautions, hand washing, personal protective equipment, environment management, and quizzes. The lecture portion was filmed in a virtual screen studio using flash animation, video, and sound effects, and it was uploaded on an internet site. The knowledge and performance scores of the experimental group after using the education program were significantly higher than those of the control group. Conclusion: The results suggest that the web-based VRE infection control education program is an effective educational method to enhance knowledge and performance of VRE infection control measures.

• Journal of Korean Academy of Nursing
• /
• v.45 no.3
• /
• pp.337-346
• /
• 2015

Purpose: This study was conducted to develop a mobile web-based pregnancy health care educational program for mothers who were at an advanced maternal age (AMA) and to verify the effects of the program on pregnancy health care. Methods: This program was developed using a web-based teaching-learning system design model and composed of 10 subject areas. This research was a quasi-experimental study using a non-equivalent control group pretest-posttest time serial design and data were collected from April 2 to May 3, 2014. To verify the effects of the program, it was used for 2 weeks with 30 AMA mothers (experimental group). For the control group, a classroom education booklet for pregnant women used with 31 AMA mothers. Results: The experimental group having participated in program had statistically significantly higher scores for knowledge (t=3.76, p <.001), self-efficacy (t=8.54, p <.001), and practice behavior (t=4.88, p <.001) of pregnancy health care, compared to the control group. Conclusion: The results of the program indicate that a Mobile web-based pregnancy health care educational program is effective in meeting the needs of AMA mothers and can be used as the prenatal educational program for AMA mothers and is appropriate as an educational media for theses mothers.

• Journal of Korean Public Health Nursing
• /
• v.8 no.1
• /
• pp.30-52
• /
• 1994

This study was conducted to diffusion of the health promotion program about no smoking in industry. No smoking program model composed of assessment, plan, implementation and evaluation was developed through the method of literature review and applied to 27 smokers of the management team and dept. of the 1st production in one industry, from October 27 to November 3D, 1993. For the analysis, descriptive statistics and paired t-test were used. The result of this study are summarized as follows: 1. The object was composed of no smoking and reduced smoking. The achievement rate of object was $48\%$. 2. As a result of the implementation of no smoking program, $11\%$ of no smoking rate was obtained. 3. After application of no smoking program, the health age was a little lower but statistical significations was not found. 4. Health education and support of family were effective in health promotion program. Complementary measures about indivisual activity for no smoking were required in no smoking program. In conclusion, subject's response about no smoking program was high and health education and support of family were effective in health promotion· program. And nurses were expected to do their roles as a planner, intervener, manager and supporter in health promotion services.

• Structural Engineering and Mechanics
• /
• v.4 no.2
• /
• pp.139-148
• /
• 1996

Vector algorithms and the relative importance of the four basic modules (computation of element stiffness matrices, assembly of the global stiffness matrix, solution of the system of linear simultaneous equations, and calculation of stresses and strains) of a finite element computer program for inelastic analysis of reinforced concrete shells are presented. Performance of the vector program is compared with a scalar program. For a cooling tower problem, the speedup factor from the scalar to the vector program is 34 for the element stiffness matrices calculation, 25.3 for the assembly of global stiffness matrix, 27.5 for the equation solver, and 37.8 for stresses, strains and nodal forces computations on a Gray Y-MP. The overall speedup factor is 30.9. When the equation solver alone is vectorized, which is computationally the most intensive part of a finite element program, a speedup factor of only 1.9 is achieved. When the rest of the program is also vectorized, a large additional speedup factor of 15.9 is attained. Therefore, it is very important that all the modules in a nonlinear program are vectorized to gain the full potential of the supercomputers. The vector finite element computer program for inelastic analysis of RC shells with layered elements developed in the present study enabled us to perform mesh convergence studies. The vector program can be used for studying the ultimate behavior of RC shells and used as a design tool.

• Journal of Families and Better Life
• /
• v.28 no.2
• /
• pp.147-163
• /
• 2010

The disposition towards volunteer work and leadership traits are the basic qualities that should be possessed by teenagers who are to become next generation leaders. The 'Volunteer Work and Leadership' program was developed to attain this goal and all S high school students were subjected to this program. This program was comprised of four modules, and this dissertation is focused on the second module: 'Wisdom Leader'. This program, which was conducted for six hours on a daily basis, was carried out two times per day during the first semesters of 2006 and 2007 on freshmen students. The program was comprised of three conceptual frameworks-Education of the heart that improves your emotion which includes 'cultural performance', 'volunteer work leadership group performance' and 'spot strategy for stress management'. Education of the hand pursues knowledge, which includes 'special lecture of leadership' and 'leader research through movies', and Education of hand which students directly participate in workshops were also used. After studying the results of the program, it was found that the satisfaction level of the education was higher during the second session than the first session. Therefore the objective of this program to enhance the leadership qualities of students was attained Also, this dissertation was able to reaffirm the relationship between volunteer work and leadership. I hope that the leadership content can be used systematically for enhancing the educational effect of volunteer work.

• Journal of Korean Public Health Nursing
• /
• v.27 no.1
• /
• pp.50-63
• /
• 2013

Purpose: The purpose of this research was to develop and evaluate the effects of an empowerment program. Method: We developed an 8-week empowerment program to decrease cancer symptoms and increase self-efficacy, self-esteem, and empowerment. This program includes aspects concerning self-knowledge and management, self-help groups, self-advocacy, resource network, and laughter therapy. We evaluated the effects of this program on 32 home-based cancer patients (one group pretest-posttest design). The data collection was performed from August 22, 2011 to October 13, 2011. Data were analyzed using the SPSS/WIN 18.0 program. Result: There were significant differences in self-esteem derived from the empowerment program. However, there were no significant differences in cancer symptoms, self-efficacy, and empowerment after the program. Conclusion: More research, using a control group pretest-posttest design that considers an appropriate intervention duration, is needed to more accurately examine the effects of the program. We expect this intervention to improve the empowerment of home-based cancer patients.

• Journal of Family Resource Management and Policy Review
• /
• v.18 no.3
• /
• pp.117-133
• /
• 2014

The purpose of this study was to enhance the marital relationships of middle-aged couples in their 50s who either had retired or were approaching retirement and to develop marriage-enrichment program that would help them maintain a happy and satisfactory family relationship. In-depth interviews were conducted with middle-aged couples in their 50s who had enrolled in the program. Developed based on the relevant literature and our own needs analyses the program was organized into three areas, family relationship, life management(time, leisure), and life plan for old ages. The program consisted of five sessions of 120 minutes each. Participants attended the program's lectures and activities. Pre and post-tests were conducted to examine the program's effectiveness. The post-test results showed improvement over the pre-test results, so we can conclude that this program would appropriate for improving the marital relationships of middle- aged couples in their 50s both before or after their retirement.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.377-382
• /
• 2011

Up to now, process design of multistage profile drawing from initial round material is performed through trial-and-error based on experience of industrial experts. This means the increase in production cost and excessive time consuming. In this study, process design program was developed for multistage profile drawing from initial round material. The program was made using VisualLISP. Therefore, the program can be operated by AutoCAD program. In order to verify the effectiveness of the program, two stage profile drawing process for producing heavy duty guide rail was design by using the program. In addition FE analysis and profile drawing experiment were performed. As a result, the program can be used in order to design profile drawing process design.