• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.179-187
• /
• 2023

The purpose of this study was to develop and apply an online-based Arduino programming experience program. In this study, the program was developed and applied based on the contents presented in the ADDIE model and Lee's model. The results of this study were as follows. First, two types of educational program were developed for online use by students of the free semester system. Second, the program content included practical materials such as teaching websites and video lectures. Third, the developed program was applied a total of three times in the school environment and when the student did not attend school. Fourth, analysis of student satisfaction confirmed that the students were satisfied with the development program. The content of this study will serve as a reference for instructors who plan online-based hands-on activities in places where instructors are not readily available, such as islands or mountainous areas.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.119-128
• /
• 2023

This study was conducted to present an alternative instructional model through natural experience activities by developing a natural experience activity program that can learn and feel how to recognize and act on nature based on flow learning. In order to achieve the purpose of the study, a nature experience program, which consists of four stages of meeting nature, exploring nature, playing with nature and sharing emotions, was developed based on the main procedures of each stage of the ADDlE instructional design model. Through the research process, activities and precautions for each stage of the nature experience activity program were presented, and major educational implications were discussed based on the developed program. The nature experience program developed through the study can provide teachers with a basic direction for nature experience activities along with changing their perception of how to do nature experience activities, and infants are expected to become learners who freely feel, experience nature and make up their own knowledge through the nature experience program.

• Journal of Families and Better Life
• /
• v.21 no.3
• /
• pp.133-146
• /
• 2003

The purpose of this study was to analyze the need for family life welfare service program, and to develope the program for managing in the Community Centers. The survey was conducted by interviewing 356 users and 360 non-users of Community Center, total 716 persons living in Daegu City, from October 8 to October 30 in 2002. The data were analyzed by the SPSS PC+ program applying t-test and ANOVA. The results were as follows : First, overall the needs for family life welfare service program, consisting of education program, facilities management and counseling program, and event program, was higher than 3.7 points. The needs level for event program was a little higher than other two programs. Second, the level of needs for family life welfare service program differed between user group and non-user group of the Community Centers. Third, the level of needs for family life welfare service program varied according to the demographic variables, such as sex, age, marital status, family life cycle, education level, vocation, monthly average income and housing type. Finally, Based on the results of needs analysis, 11 education programs, 4 facilities management and counseling programs and 5 event programs were developed for family life welfare service program. These programs developed in this study could be applied to diverse groups classified by age, social class, family life cycle of citizens. Also the programs should be applied in terms of family unit, as well as individual base to enhance the function of family life.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.524-529
• /
• 2004

In this paper, We described the method which developed the optimal control system for air separation unit to change production rates frequently and rapidly. Control models of the process were developed from actual plant data using subspace identification method which is developed by many researchers in resent years. The model consist of a series connection of linear dynamic block and static nonlinear block (Wiener model). The model is controlled by model based predictive controller. In MPC the input is calculated by on-line optimization of a performance index based on predictions by the model, subject to possible constraints. To calculate the optimal the performance index, conditions are expressed by LMI(Linear Matrix Inequalities).In order to access at the Bailey DCS system, we applied the OPC server and developed the Client program. The OPC sever is a device which can access Bailey DCS system.The Client program is developed based on the Matlab language for easy calculation,data simulation and data logging. Using this program, we can apply the optimal input to the DCS system at real time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.499-505
• /
• 2018

Shipping and logistics safety, security system is strengthening worldwide, the development of shipping and logistics safety security core technology for national security logistics system construction has been carried out. In addition, it is necessary to localize the Array Detection System, which is a core component of the container search machine, to cope with the 100% pre-inspection of the container scheduled for 2018 in the United States. In this research, we propose a test software program developed by using TI-RTOS (Texas Instruments - Real Time Operating System) with a test digital signal processing board which is developed self development. We have developed a program that can test GPIO, SRAM, TCP/IP, and SDcard using M4 MCU. Also we propose a study on a self-developed Digital Signal Processing Board among the array detection systems that replace foreign products. We have developed a test board that can test M4 MCU and developed an X-Ray Detector Digital Signal Processing Board that combines MCU and FPGA.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.2
• /
• pp.186-197
• /
• 2020

Purpose: The purpose of this study was to develop a program for reinforcing the resilience of new nurses and relation-oriented organizational culture. Methods: An Intervention Research (IR) model was used to develop a program. Literature review, focus group interviews with nurses and need surveys were conducted from August to December 2018. Based on the results of the investigation, the researcher developed the content of a program. The program was revised by nurse managers for the content validation. Results: According to the results of the need surveys, 58.8% of the participants thought relation-oriented culture was the most ideal, and 61.8% of the participants wanted to participate in a program for organizational culture improvement. In the focus group interview, not only new nurses but also wards and nursing organizations should be a target subject of the program. Reinforcement of resilience and relation (3R) program was developed as a one-year course, which includes a 'mentor-mentee' program and a 'thanks' program. Conclusion: It would contribute to improving the resilience of new nurses and creating a relation-oriented organizational culture by 3R program. The 3R program could play a role as expanded program from an existing pragmatic short-term training program for improving the competencies or communication skills of new nurses.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.195-204
• /
• 2000

The finite element analysis (FEA) is widely used in modern structural dynamics because the performance of structure can be predicted in early stage. However, due to the difficulty in determination of various uncertain parameters, it is not easy to obtain a reliable finite element model. To overcome these difficulties, a updating program of FE model is developed by consisting of pretest, correlation and update. In correlation, it calculates modal assurance criteria, cross orthogonality, mixed orthogonality and coordinate modal assurance criteria. For the model updating, the continuum sensitivity analysis and design optimization tool(DOT) are used. The SENSUP program is developed for model updating giving physical parameter sensitivity. The developed program is applied to practical examples such as the BLDC spindle motor of HDD, and upper housing of induction motor. And the sensor placement for the square plate is compared using several methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.94-102
• /
• 2000

A computer program for three dimensional dynamic analysis of a mount system composed of rigid or flexible bodies and mount elements is developed. Cartesian coordinates and Euler parameters are used to specify the positions and orientations of the bodies. The equations of motion are formulated using Langrange equation and Langrange multiplier technique. The developed program includes routine, for inclined mount elements, several kinds of driving constrains, and external forces. The Static equilibrium analysis routine is also developed using iterative method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.239-242
• /
• 2002

With existing illumination rendering system being used in domestic, internationally developed common programs are taking over the market more than 90%. However, since the programs are established with DB designed to be most suitable for their own products, accuracy in analysis and visualized image are hardly reliable. This raises the necessities of establishing DB for domestic developed products. A method of establishing artificial luminair DB, which was studied on DB establishment in consideration of optical characteristics of domestic products with using RADIANCE program was presented in this study, and it is considered as the program of simulating light movement most accurately among all rendering programs developed so far.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.44-52
• /
• 1992

A post-processor is developed to be effectively usable in the personal computer. 3-dimensional controur lines are shown on the surface of the finite element model and also on the 3-dimensional cutting plane, using the function linearly interpolated onto the triangular elements which are constructed on the surface or sectional polygons. And these polygons are originated from the finite element model, 3-dimensional model is projected on the plane with hidden line removal by comparision technique[6]. The graphic data file is used to increase the protability of the program. It is easy to use in the other computer system if the graphic routine adopted that computer system is developed. The developed program has wide applications in 3-dimensional finite element analysis.