• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.430-436
• /
• 2015

This study examined the correlation of educational experience with practical behavior in infection control. Subjects were 152 dental hygienists in Gwangju from September 15 to October 5, 2015. The ratio of dental hygienists educated on infection control was higher in those worked in dental care with 2~4 dentist for 2~5 years and lower in those worked in dental cared with 1 dentist for 2~5 years (p<0.05, p<0.001). The dental hygienists with or without educational experience in infection control exhibited the highest activity rate in hand wash and the lowest in face protection. Barrier in health belief, was lower with the need for education in infection control among the factors affecting on the activity in infection control. The activity was higher with susceptibility and cue to action (p<0.05). Based on the results, education program on infection control should be developed, and applied periodically and obligatorily for dentist and all staffs of dental care to remove susceptibility and barrier, and to enhance cue to action. This will result the effective control of infection by elevating the health belief.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.99-107
• /
• 2001

Manufacture of fishing vessel is needed the effective material for light, strength, fire and corrosion of water in order to improve durability by high-speed and fishing. These fishing vessel can be divided into FRP and AI alloys fishing vessel. FRP fishing vessel is light and effective for strength but highly ignited and susceptible to heat during the manufacturing ship by-produce noxious component for human. In the case of a scrapped ship, it cause environmental pollution. On the other hand, aluminum is a material in return for FRP and has merit of high-strength and lightness. It's more heat proof and durable than FRP and superior to prevent from corrosion. Al alloys fishing vessel development is rising as an urgent matter. But, al alloy has some defect of bad weldability, welding transformation, cracks and overcost of construction. Therefore this study is to develop the new welding joint shape solving aluminum defects and mechanical behavior. First of all, strength was compared and reviewed by analysis of plate, stiffen plate, new model simplified by using plate theory. On the base of this result, plate and new model of temperature distribution, weld residual stress and strength of tensile, compressive force were compared and reviewed by finite element computer program has been developed to deal with heat conduction and thermal elasto plastic problem. Also, new model is proved application possibility and excellent mechanic by strength comparison is established to tensile testing result.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.139-150
• /
• 2014

In this essay, we hoped to see how the operational university job database systems perform badly, since there are a lot of signs that they fall short of data design fundamentals. Fortunately, we are able to choose a university employment support database(UESD) application as a candidate for our study. We have taken UESD system as it is and we have developed an enhanced version of the UESD system, which strictly followed the basic fundamentals in data modeling and named it as NewUESD system. Then, we have conducted a comparison to see how much UESD system is deviated from the standard balancedness found in NewUESD. From the perspective of data obesity, we computed how much UESD contains unnecessary data. The NewUESD contained no unnecessary data at all, which implies that it has only data that is necessary to form a data model. But the data obesity of UESD system is found to be more than 50%. Therefore, it is significantly higher, 37% higher in this case, than the obesity judged to be normal, which is 19% in NewUESD system.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.183-192
• /
• 2020

The purpose of this study was to identify the relationship between dental hygiene students' emotional intelligence, interpersonal competence, and major satisfaction, as a preliminary professional dental hygienist who can provide effective dental hygiene college life and high-quality dental medical services. Attempts were made to find ways to promote it. To collect data, a self-administered questionnaire was developed using a convenient sample method, and the questionnaire survey was conducted on dental hygiene students in Daejeon, Cheongju and Gunsan from April 8, 2019 to April 26, 2019. As a result, it was found that emotional intelligence and interpersonal competence were positively correlated, and there were positive correlation with major satisfaction, and interpersonal competence and major satisfaction were positively correlated. Emotional intelligence, interpersonal competence, and clinical practice satisfaction were the factors that influenced major satisfaction. These results indicate that individually customized counseling and educational approach are required and there is the necessity of utilizing multidimensional improvement strategy that integrate emotional intelligence and interpersonal ability training program.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.824-835
• /
• 2009

Objectives : The purpose of this study was identified about oral health status and oral health needs of elderly. Moreover this study would be based further research of development of oral health in elderly. Methods : This study was undertaken to determine the oral health status and the need of oral management of over 65years elderly who were with dental prosthesis in elderly welfare center and Kyung Ro Dong in Kyung Bok and Kyung Nam. The results were as follows. Results : The sample was 200 participants. The demographical characteristic were that 74.0% of participant was female, 29.0% of participant was 75~79 years old, 42.5% of participant was under elementary, and 45.5% of participant was living alone. 43.7% of participant was pain from muscle-skeletal disease, 37.1% of participant was cardiac-vascular disease, and 31.1% of participant was ophthalmic disease. In oral health status, 54.5% of participant was partly artificial tooth and 45% of participant was whole artificial tooth. 78.0% of participant used under 10 years with partly artificial tooth and only 27.4% were satisfaction with artificial tooth. 83.5% of participant used under 10 years with whole artificial tooth and only 26.4% were satisfaction with artificial tooth. In the oral health status of partly artificial tooth, the average of toothbrush was 2 times, 42.2%. The majority method of toothbrush was 'their own freely' 55.0%. The time of toothbrush was 'after meal' 81.8%. The study result showed that majority participant didn't experience of tongue brush, regular examination, scaling, and oral health education. In the need of oral management with the whole artificial tooth, the participant who used longer artificial tooth was significantly higher about artificial irrigation and the method of management(p<.05). The need of participant who answered 'don't gum massage', was higher of xerostomia treatment(p<.01) and halitosis treatment(p<.05). In the need of oral management with the partly artificial tooth, the participant who used longer artificial tooth was significantly higher about regular examination(p<.01), oral cavity massage(p<.05), scaling(p<.05), dental caries treatment(p<.01). The need of participant who answered 'don't satisfaction with artificial tooth' was higher of regular examination and scaling(p<.05). Conclusions : Oral management needs of elderly who kept artificial tooth or denture required were regular dental examination, xerostomia management, management of artificial tooth and irrigation, and management of bad breath. This results meaned the oral health intervention program for elderly was developed regularly.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.24 no.2
• /
• pp.107-111
• /
• 2013

Objectives : We developed two-dimensional (2D) scanning videokyomography to evaluate the mucosal wave of whole vocal cords in real time to overcome the limit of preexisting stroboscopy and line scanning videokymography which could not evaluate it. Methods : We implemented a continuous light source with high brightness, a high-definition CMOS camera, and capture board for saving the data. We created the software program to analyze the image data from the system. The test of the functionality of the 2D scanning videokymography camera was performed in one of the authors (P.H.J 32 years old male). Vocal cord images were obtained during normal phonation and falsetto phonation. Images were obtained also during cough, diplophonia. Results : The system made it possible to measure objective parameters, including fundamental frequency, amplitude, regularity, mucosal wave, and phase difference, medial and lateral peak, opening versus closing duration related to vocal fold vibration. Simultaneously, it enabled analysis of the whole mucosal wave of the entire vocal fold in real time. 2D scanning videokymography was also effective for evaluating the dynamic status of the vocal fold when the subject phonated aperiodic voice. Conclusion : In conclusion, 2D scanning videokymography can support the analysis of the whole mucosal wave of the entire vocal cord with objective vocal parameters, overcoming the limitations of stroboscopy and previous line scanning videokymography techniques.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.210-216
• /
• 1987

A computer program written to predict blast occurrence based on micro climatic events was developed and tested as an on-site microcomputer in field plots in 1984 and 1985. A microcomputer unit operating on alkaline batteries; continuously monitored air temperature, leaf wetness, and relative humidity; interpreted the microclimate information in relation to rice blast development and displayed daily values (0-8) of blast units of severity (BUS). Cumulative daily BUS values (CBUS) were highly correlated with blast development on the two susceptible cultivars, M-201 and Brazos grown in field plots. When CBUS values were used to predict the logit of disease proportions, the average coefficients of determination $(R^2)$ between these two factors were 71 to $91\%$, depending on cultivar and year. This was a significant improvement when compared to 61 to $79\%$ when days were used as a predictor of logit disease severity. The ability of CBUS to predict logit disease severity was slightly less with Brazos than M-201. This is significant inasmuch as Brazos showed field resistance at mid-sea­son. The results in this study indicate that the model has the potential for future use and that the model could be improved by incorporating other variables associated with host plants and pathogen races in addition to the key environmental variables.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.30-34
• /
• 2009

Purpose: Many companies developed a lot of programs with continuous effort for program upgrading. With this acquire superior image quality for the purpose of quick examination and progress in spatial resolution. This study was to obtained clinical usefulness on a appropriate parameter of FWHM for speed and alpha value for superior image quality. Materials and Methods: Gamma camera by Siemens (e.cam) and spatial resolution phantom and four quadrant bar phantom used. Compared for FWHM by changed scan speed 15, 20, 25, 30, 35, 40 cm/min in scatter and non scatter in Onco Flash of spatial resolution phantom. Visual evaluation of count rate and bar phantom image for increased of alpha value of 10% in 0~100%. Results: FWHM by the scan speed was 9.37, 9.40, 9.28, 9.30, 9.31, 9.53 mm in the scatter. Count rate increased alpha value 10% increased. Visual evaluation was suitable to below 30%, Therefore spatial resolution improved on FWHM at the scan speed 25~35 cm/min applying for alpha value 30% in Onco Flash was average 9.3 mm less than FWHM of below 15 cm/min and above 40 cm/min. Conclusion: We found on appropriate parameter to progress of image quality. And there be a useful guideline for you that appropriate scan speed on vary in parameters of reduction on examination time and advancing image quality.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.213-232
• /
• 2009

This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

• Journal of Plant Biotechnology
• /
• v.30 no.3
• /
• pp.281-291
• /
• 2003

In this review, we described the catalogues of the rice proteome which were constructed in our program, and functional characterization of some of these proteins was discussed. Mass-spectrometry is the most prevalent technique to rapidly identify a large number of proteome analysis. However, the conventional Western blotting/sequencing technique has been used in many laboratories. As a first step to efficiently construct protein cata-file in proteome analysis of major cereals, we have analyzed the N-terminal sequences of 100 rice embryo proteins and 70 wheat spike proteins separated by two-dimensional electrophoresis. Edman degradation revealed the N-terminal peptide sequences of only 31 rice proteins and 47 wheat proteins, suggesting that the rest of separated protein sports are N-terminally blocked. To efficiently determine the internal sequence of blocked proteins, we have developed a modified Cleveland peptide mapping method. Using this above method, the internal sequences of all blocked rice proteins(i, e., 69 proteins) were determined. Among these 100 rice proteins, thirty were proteins for which homologous sequence in the rice genome database could be identified. However, the rest of the proteins lacked homologous proteins. This appears to be consistent with the fact that about 45% of total rice cDNA have been deposited in the EMBL database. Also, the major proteins involved in the growth and development of rice can be identified using the proteome approach. Some of these proteins, including a calcium-binding protein that tuned out to be calreticulin, gibberellin-binding protein, which is ribulose-1.5-bisphosphate carboxylase/oxygense active in rice, and leginsulin-binding protein in soybean have functions in the signal transduction pathway. Proteomics is well suited not only to determine interaction between pairs of proteins, but also to identify multisubunit complexes. Currently, a protein-protein interaction database for plant proteins(http://genome.c.kanazawa-u.ac.jp/Y2H)could be a very useful tool for the plant research community. Also, the information thus obtained from the plant proteome would be helpful in predicting the function of the unknown proteins and would be useful be in the plant molecular breeding.