• 한국유체기계학회 논문집
• /
• 제6권3호
• /
• pp.15-20
• /
• 2003

For measuring friction factor of artificially-roughened surfaces which are usually applied to damper seals, flat plate test apparatus is designed and fabricated. The measurements of leakage flow and pressure distribution through round-hole patterned specimen with different hole areas are described, and a method is discussed for determining the friction factor experimentally. Results show that the friction factor of the round-hole patterned surface is bigger than that of smooth surface, and increases as increasing the hole area. A empirical friction factor model for the round-hole patterned surface can be descrived by the Moody's friction factor formula.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.284-286
• /
• 2003

The low load power factor causes various problems such as the Increase of the power loss and the voltage instability. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power troublesome, from which the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost and integrated costs are used for determining the locations and capacities of reactive power compensation devices effectively and for enhancing the load power factor appropriately. It is shown through the application to a small-scale power system that the system power factor can be enhanced effectively and appropriately using the load power factor sensitivity and integrated costs.

• 지질공학
• /
• 제19권4호
• /
• pp.441-457
• /
• 2009

본 연구는 국내 외의 사질지반에 시공된 타입말뚝에 대해 파괴가 현저하게 나타날 때까지 재하한 정재하시험 실측값을 이용하여 극한하중 항복하중 침하량기준의 각각 판정법으로 극한하중을 추정하였다. 추정된 극한하중을 실측된 파괴하중으로 정규화하고 말뚝특성에 따라 판정법별 비교 분석 하였다. 또한 극한하중 추정시 적합한 판정법을 검토하고 허용하중 결정시 안전율을 재평가하여 다음과 같은 결론을 얻었다. 극한하중 판정법으로 구한 극한하중은 Chin 방법에 의해 해석된 값이 실측값 보다 과대평가하는 경향을 나타냈으며 B. Hansen 80%기준과 Stability Plot 방법이 실측치와 거의 일치하여 가장 신뢰성이 있는 방법으로 판단되었다. 허용하중 산정시 극한하중 판정법에 의해 구한 파괴하중에 적용해야 할 안전율을 구조물기초설계기준에 적용된 안전율을 기준으로 환산하면 B. Hansen 90% 방법을 제외하고 3.0보다 큰 값이 적용되어야 할 것으로 판단되었으며 항복하중 판정법들의 경우 기준안전율 2.0보다 큰 값이 적용되어야 할 것으로 판단되었다. 침하량 기준에 의해 구한 하중에 적용해야 할 안전율을 극한하중에 대한 안전율 3.0을 기준으로 환산해 보면, 전침하량 기준 및 순침하량 기준은 3.0보다 작은 값이 적용되어야 할 것으로 판단되었다.

• 천문학회보
• /
• 제37권1호
• /
• pp.35.1-35.1
• /
• 2012

Determining the virial factor of the broad-line region (BLR) gas is crucial in calibrating AGN black hole mass estimators, since the measured line-of-sight velocity needs to be converted into the representative velocity of the BLR gas. The unknown virial factor has been empirically calibrated based on the $M_{BH}-{\sigma}_*$ relation of non-AGN galaxies, but the claimed values are different by a factor of 2 in recent studies. We investigate the origin of the difference by measuring the $M_{BH}-{\sigma}_*$ relation using the most updated nearby galaxy sample, and explore the dependence of the virial factor on the various fitting methods. We find that the discrepancy is mostly caused by the sample bias while the difference stemming from various regression methods is marginal. Based on the best-determined virial factor, we present the updated $M_{BH}-{\sigma}_*$ relation of local active galaxies.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1430-1438
• /
• 1994

Friction-factors for honeycomb surfaces are measured with a flat plate tester. The flat plate test apparatus is described and method is discussed for determining the friction-factor experimentally. The friction-factor is calculated for the flat plate test based on the Fanno-line flow. The test parameters are honeycomb cell width, depth, clearance, inlet pressure, and Reynolds number(or Mach number). A new empirical friction-factor model for honeycomb surfaces are developed as a function of these parameters.

• 한국측량학회지
• /
• 제6권1호
• /
• pp.3-12
• /
• 1988

본 연구는 최소자유법를 기초로 각과 거이 관측요소를 조합시켜 동시 조정하는 결합조정방법의 해석이론을 정립하고 이를 삼각측량 삼변측량 독립 조정방법과 비교하여 그의 특성을 고찰하는데 목적이 있다. 각과 거이의 표준오차를 감소시킴에 따라, 오차분포의 비율은 삼각측량, 삼변측량 방법이 각각 39.8%, 33.9% 정도의 오차를 나타낸 반면, 조합조정(combination adjustment) 방법은 26.3%로, 낮은 비율로 나타나므로 조합기법이 보다 우월함을 알 수 있었다. 측정요소의 표준오차를 독립적으로 각각 고찰한 경우, 기하학적 표준오차의 감소율은 각 방법이 다양한 변화를 타나내었으나, 동시에 고찰한 경우는 삼각측량 75.5%, 삼변측량 74.1%, 종합기법 69.2%의 감소율을 나타내었다. Weight Factor를 증가시킴에 따라, 삼각측량 기법은 정도가 향상되었으나, 삼변측량 기법은 감소되므로, 균형 있는 Weight Factor의 결정은 중요한 의미를 가지며 이상적인 Weight Factor를 결정한다면, combination 해석기법은 보다 정확한 해석방법으로 그 활용이 기대된다.

• Safety and Health at Work
• /
• 제11권1호
• /
• pp.61-70
• /
• 2020

Background: This study aims to assess whether the TSI PortaCount (Model 8020) is a measuring instrument comparable with the flame photometer. This would provide an indication for the suitability of the PortaCount for determining the workplace protection factor for particulate filtering facepiece respirators. Methods: The PortaCount (with and without the N95-Companion^TM) was compared with a stationary flame photometer from Moores (Wallisdown) Ltd (Type 1100), which is a measuring instrument used in the procedure for determining the total inward leakage of the particulate filtering facepiece respirator in the European Standard. Penetration levels of sodium chloride aerosol through sample respirators of two brands (A and B) were determined by the two measuring systems under laboratory conditions. For each brand, thirty-six measurements were conducted. The samples were split into groups according to their protection level, conditioning before testing, and aerosol concentration. The relationship between the gauged data from two measuring systems was determined. In addition, the particle size distribution inside the respirator and outside the respirator was documented. Linear regression analysis was used to calculate the association between the PortaCount (with and without the N95-Companion^TM) and the flame photometer. Results: A linear relationship was found between the raw data scaled with the PortaCount (without N95-Companion^TM) and the data detected by the flame photometer (R² = 0.9704) under all test conditions. The distribution of particle size was found to be the same inside and outside the respirator in almost all cases. Conclusion: Based on the obtained data, the PortaCount may be applicable for the determination of workplace protection factor.

• 통상정보연구
• /
• 제11권3호
• /
• pp.311-335
• /
• 2009

This study investigates the factors barrier the performance of Korean manufacturing firms in China. Also an empirical data use the field survey of Korean manufacturing firms in China. as a result, First, we find that employment-cost factor, that is rising labor costs, a change of occupation is an effect the performance of Korean manufacturing firms in China. Second, business beginning year and by 7 region factor is very significant on the performance of Korean FDI firms in china. And then, Korean corporate investment in China is a desirable form of long-term investment shall be determined. also we know that regions of China, differentiated investment approach is effective. finally, The result shows that FDI to China is need of the long term plan, and In actual use, these FDI should be applied flexibly in china business environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.241-245
• /
• 1988

This paper reports the experiments regarding to diagnosis techniques for power transformers by measuring dissipation factor and moisture contents of mineral oils. Thermal aging environments of mineral oils were varied by the specially designed systems. Thermal aging of elevated temperature of $90^{\circ}C$ was performed for about 240 and 460 hours, respectively. Dissipation factor, permittivity, and water content were measured. Our test samples were not exposed to air. Dissipation factor increased while permittivity did not change. The level of dissipation factor determining the insulating quality of mineral oil was compared with the previous results of resistivity and several correction factor.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.512-518
• /
• 2008

This study would like to evaluate the influences with the strength mismatch and the variation of the welding width of the narrow gap welding for the plastic parameter, the major constant determining the plastic ${\eta}$-factor of J-Integral, using 3-D FEM. For this, we evaluate the plastic ${\eta}$-factor according to the variation of the strength mismatch of weldment with same materials and welding width through FEM. Also, we proposed the equation of plastic ${\eta}$-factor considering the variation of the strength mismatch of weldment with similar materials and welding width.