• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.17-18
• /
• 2003

Although flounder is one of the most important marine fish for aquaculture in Korea, feeding the flounder in commercial farms depends mainly on moist pellet in which over 70% frozen fishes (e.g. frozen horse mackerel) are incorporated in its formulation. Therefore, for further expansion of flounder farming, it is essential to employ practical formulated feeds that can support reasonable growth. Development of nutritionally balanced and cost-effective feeds is dependant on the information about nutritional requirement and feed utilization of the species. Nutrient and energy source in feed are needed for the growth and maintenance of fish. Protein is probably the most important nutrient affecting fish growth and feed cost. Therefore, it is essential to determine the optimum dietary protein level for the growth of fish, both its high proportion in the feed and because it is the main factor in determining feed cost. Dietary energy level is also critical because protein source in the feed is utilized as an energy source when the feed deficient in energy is fed to fish, whereas when the feed excess in energy is fed to fish, feed consumption decreased and resulted in growth reduction due to lack of other necessary nutrients for normal growth. Improper dietary protein, energy levels and/or their ratio will lead to an increase of fish production cost and deterioration of water quality resulting from wasted feed; thus, they are important in formulating commercial feed. Dietary lipids play important roles in providing energy and essential fatty acid for normal growth and survival of fish. Although carbohydrates are not essential nutrients for carnivorous fish, these compounds play important roles as a low-cost energy source for protein sparing and also as a feed binder. Nutrition researches for flounder have identified its requirements of protein, lipid and essential fatty acid, vitamin, and minerals for normal growth. Other studies have also been carried out to investigate the utilization of the protein, lipid and carbohydrate sources. Based on these nutritional information obtained, practical feed formulations have been studied for improve aquaculture production of flounder. The results of the researches on utilization of dietary protein, lipid and carbohydrate by flounder are discussed in this review.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.197-201
• /
• 1996

To greatly decrease bolting rate and deterioration of root quality, seeds of Angelica gigas had sown and grown several month earlier than traditional seedtime. Roots were harvested in the middle of November in same year. Roots were devided to several parts such a fune root, secondary root, stele and cortex of main root. We ditermined and compared with the major constisuents contained in each parts of 1 and 2 year old roots. Among each parts of root, the amount of constituents in the fine root and cortex were much higher than those in stele of main root. Content of decursin and decursinol angelate was higher 6.5% in 2 year old root than 4.8% in 1 year old root and their component ratio showed 10:7.5 in 1 year old root and 10:6.0 in 2 year old root, respectively. But merits as a material of oriental medicine for 1 year old root that cultivated by early short-time growing seedling were generally acknowledged.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.61-66
• /
• 2013

This paper presents the results of finite element simulations of elastic wave propagation in an underwater steel plate and the verification of a proposed method utilizing elastic wave-based damage detection. For the simulation and verification, we carried out the following procedures. First, three-dimensional finite element models were constructed using a general purpose finite element program. Second, two types of damages (mechanical defects and deteriorations) were applied to the underwater steel plate and three parameters (defect location, defect width, and depth) were considered to adjust the severity of the applied damages. Third, elastic waves were generated using the oblique incident method with a Gaussian tone burst, and the response signals were obtained at the receiving point for each defect or deterioration case. In addition, the received time domain signals were analyzed, particularly by measuring the magnitudes of the maximum amplitudes. Finally, the presence and severity of each type of damage were identified by the decreasing ratios of the maximum amplitudes. The results showed that the received signals for the models had the same global pattern with minor changes in the amplitudes and phases, and the decreasing ratio generally increased as the damage area increased. In addition, we found that the defect depth was more critical than the width in the decrease of the amplitude. This mainly occurred because the layout of the depth interfered with the elastic wave propagation in a more severe manner than the layout of the width. An inverse analysis showed that the proposed method is applicable for detecting mechanical defects and quantifying their severity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.2004-2011
• /
• 2004

The applicability of the ultrasonic C-scan inspection is restricted due to the deterioration of mechanical properties of specimen during the test. Therefore, the aim of this research is applied to Eddy Current (EC) test substitute for the C-scan inspection in CFRP tube containing defects. This research is to evaluate the EC signals for the inspection of CFRP tube containing various circular hole defects (20% to 100% depth to the specimen thickness) using the unloading specimen and radial loading specimen. This study was considered the following points; 1) Analysis of EC signals for the inspection of saw-cut defect and circular hole defect, 2) The evaluation of defect depths and EC signals relationship. 3) Variation of EC signal owing to the radial load. In conclusions, the high frequency such as 300∼500 kHz made it possible to the inspection of 40% to 100% defects. Particularly, in case of 20% defect, the EC signal was not detected due to the noise of micro-crack and delamination. While the depth of the hole defects were decreasing, the difference of the phase angle between unloading specimen and radial loading specimen was gradually increasing.

• Korean Institute of Interior Design Journal
• /
• v.26 no.3
• /
• pp.71-80
• /
• 2017

Korea is facing various social problems including single elderly household, increase in the number of disabled people and poverty rate and a difference in the proportion of males to females between urban areas and rural areas along with the advent of rapid aging society. Especially, the ratio of poor households in rural areas residing in housing which falls below the minimum housing level and most of them are in the dead zone of housing welfare. In addition, if it is impossible for them to move (relocate) to new housing, the house remodeling is the only measure for improving their housing welfare. However, we don't have enough prior relevant academic and practical experience, and house remodeling requires a series of process including prior planning construction and post-occupancy evaluation, but almost no fundamental research that provides relevant insight has been carried out. Therefore, the purpose of this study is to describe all field situations that occur in the whole customized house remodeling process for disabled female senior citizens living alone in a rural area. The remodeling process was classified into initial planning stage, field verification and adjustment stage and construction stage as the method to participate in the field directly, and any change in the remodeling plan and its causes at each stage were analyzed. As a result, some remodeling items were changed from the main viewpoint of participating parties before the beginning of construction and for reasons such as the deterioration level of housing site, limitation in building equipment and rearrangement of housing, etc., and the remodeling method and its details were developed. It was identified that constant change that occurred in the remodeling process resulted from 1) unique poor characteristics of existing housing and 2) physical condition of residents and their unique lifestyle characteristics that were two aspects required to be emphasized by customized remodeling.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.5
• /
• pp.7-24
• /
• 2008

Masan-Jinhae Bay, in Korea, is known for its frequent algal bloom outbreaks. This study was conducted in order to examine the environmental characteristics of the area, with the aim of identifying indicators that could be used to speculate about future algal blooms. The water temperatures and salinities in Haengam Bay, one of the small inner bays within Jinhae, appeared to re relatively higher than those in Masan and Jinhae bays, across most seasons. Furthermore, stratification begins to develop in all three regions from spring to summer as a result of the local heating effects and an increase in the efficient from the surrounding land. As a result, anoxic conditions appear near the bottom layer of the bay, leading to the deterioration of water quality, which has been identified as one of the causes of bloom outbreaks. Compared to Haengam and Jinhae bays, concentrations of DIN and DIP were remarkably higher in Masan Bay. However, the mean ratio of DIN to DIP was 3.3$\sim$13.6 in all three regions throughout the year, suggesting that nitrogen can function as a growth-limiting factor for phytoplankton. The results of mathematical models showed that cumulative organic pollutants may be a trigger for direct algal bloom occurrences, since residual tidal currents appeared to be less than $3\;cm\;\cdot\;s^{-1}$. Furthermore, computed DO concentrations in the four small inner bays of Jinhae during the summer appeared to be $3\;cm\;\cdot\;l^{-1}$ indicating a hypoxic state. Likewise, computed Chl-a concentrations turned out to be more than $0.01\;mg\;\cdot\;l^{-1}$, indicating eutrophication across most seasons. Based on the overall results, Masan-Jinhae Bay appeared to possess a very high potential for algal bloom outbreaks at anytime during the year.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.181-181
• /
• 2016

Hydrogenated microcrystalline silicon (${\mu}c-Si:H$) films have attracted much attention as materials of the bottom-cells in Si thin film tandem photovoltaics due to their low bandgap and excellent stability against light soaking. However, in PECVD, the source gas $SiH_4$ must be highly diluted by $H_2$, which eventually results in low deposition rate. Moreover, it is known that high-rate ${\mu}c-Si:H$ growth is usually accompanied by a large number of dangling-bond (DB) defects in the resulting films, which act as recombination centers for photoexcited carriers, leading to a deterioration in the device performance. During film deposition, Si nanoparticles generated in $SiH_4$ discharges can be incorporated into films, and such incorporation may have effects on film properties depending on the size, structure, and volume fraction of nanoparticles incorporated into films. Here we report experimental results on the effects of nonoparticles incorporation at the different substrate temperature studied using a multi-hollow discharge plasma CVD method in which such incorporation can be significantly suppressed in upstream region by setting the gas flow velocity high enough to drive nanoparticles toward the downstream region. All experiments were performed with the multi-hollow discharge plasma CVD reactor at RT, 100, and $250^{\circ}C$, respectively. The gas flow rate ratio of $SiH_4$ to $H_2$ was 0.997. The total gas pressure P was kept at 2 Torr. The discharge frequency and power were 60 MHz, 180 W, respectively. Crystallinity Xc of resulting films was evaluated using Raman spectra. The defect densities of the films were measured with electron spin resonance (ESR). The defect density of fims deposited in the downstream region (with nonoparticles) is higher defect density than that in the upstream region (without nanoparticles) at low substrate temperature of RT and $100^{\circ}C$. This result indicates that nanoparticle incorporation can change considerably their film properties depending on the substrate temperature.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.326-331
• /
• 2006

MMA(methyl methacrylate)/IPMI(N-isopropyl maleimide) copolymers are one of the well known heat resistant materials for POF(plastic optical fiber). However, because of the large difference in the reactivity ratio between MMA and IPMI$(r_1/r_2=1.72:0.17)$, the compositional drift occurs during the polymerization process which causes the deterioration of the physical properties of these copolymers. In this paper, we report that the compositional drift of the copolymer could be reduced by the addition of styrene (St) which increased the reactivity of IPMI in the MMA/IPMI copolymerization system and conversion was also increased by 1.5 or 2 times. The MMA/IPMI/St terpolymer had higher refractive index than the MMA/IPMI copolymer which depended on the contents of sytrene.

• Journal of Nutrition and Health
• /
• v.15 no.4
• /
• pp.277-289
• /
• 1982

Because of a high degree of unsaturation of perilla seed oil vitamin E deficiency can be produced in chicks by using this particular oil diet. It is therefore convenient to use this oil for elucidating more detailed function (s) of vitamin E. The present study was undertaken to investigate the nutritional and pathological aspects both of high PUFA and of low vitamin E in the diet eventually to elucidate the function(s) of vitamin E. The present study examines the relationships between PUFA, vitamin E and Se in the experimental diets by measuring vitamin E levels both in serum and in liver and activities of SGPT and SGOT and by examining electron micrographs of the chick hepatocytes. Vitamin E concentrations in serum and liver responded to dietary treatments. Serum levels of vitamin E were more affected than those in liver, the values of groups IV(15% fat,- Vit.E) and V(15% fat,-Vit E,-Se) were significantly lower than those of groups I (5% fat) and 111 (15% fat) with P/S ratio of 1. The activities of SGOT and SGPT were found not to be different significantly among different diet groups. Electron microscopic observations of the chick hepatocyte revealed degeneration of mitochondria and appearance of vesicles in the cytoplasm of groups fed diets high in PUFA and deficient in vitamin E alone or deficient in both vitamin E and Se. In the same group pyknotic nuclei and deterioration of the sinusoidal border, showing diminution in microvilli were also observed. More detailed studies concerning biochemical aspects should be carried out by using radioisotopes both in the in vitro and in vivo systems and morphological study should have a focus on the changes in nucleus which seems already suggestive in the present observation.

• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.139-144
• /
• 2015

This study was done the calculation formula for calculating the below item. That is the moisture content of the substrates raw materials, water content of the mixed substrates; the amount of media, dry weight, amount of liquid, bulk density in the bottle; dried materials volume, water volume, mixing ratio in a substrates mixing materials; water requirement amount, replenishment amount for water content control of the substrates and the total amount of substrates. And each was prepared in an Excel file for automatically calculated. The calculation of the Excel file will be able to take advantage for the mushroom growers; to make raw material costs, per bottle nutrient content and moisture content maintained throughout the year and new media composition. At this time we expect, while minimizing the quantity or deterioration in the daily ups and downs continued growing courses throughout the year contribute to stabilizing production.