• 대한전자공학회논문지TC
• /
• 제37권6호
• /
• pp.372-372
• /
• 2000

이 논문에서는 직접수열 부호분할 다중접속 계통에서 의사잡음 부호를 획득하는데 알맞은 비모수 방식을 제안한다. 이 방식에서는 매개변수를 쓰지 않기 때문에 시간에 따라 바뀌는 간섭의 분산을 추정하는 과정 없이 검파기의 문턱값을 결정할 수 있다. 이제까지의 검파기와 제안한 검파기의 성능을 수식 결과와 모의 실험 결과로 견주어보았다. 이 결과로부터 간섭의 분산을 정확히 추정할 수 없을 때에는, 제안한 검파기를 쓰는 직접수열 부호분할 다중접속 계통의 성능이 이제까지의 검파기를 쓸 때보다 좋음을 보였다.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.959-966
• /
• 2006

The electron-capture detector (ECD) of gas chromatographs (GC) has been used widely in pesticide analysis. However, as ECD relies on radioactive material, it is troublesome to purchase and maintain. Therefore, potent replacements for ECD were investigated. A Pulsed-discharge detector (PDD) for ECD was tested and the analytical results of PDD (ECD mode), ${\mu}ECD$, and nitrogen-phosphorus detector (NPD) were compared for 107 pesticides including organochroline, organophosphorus, pyrethroids etc. The number of pesticides identified at the lowest limit of detection (LOD) was 36, 29, and 2 for PDD, ${\mu}ECD$, and NPD, respectively. The remaining pesticides showed same response to PDD and ${\mu}ECD$. The GC-PDD analysis of pesticides spiked into representative agricultural products (brown rice, spinach, and mandarin oranges) also showed good and/or equivalent recoveries using $GC-{\mu}ECD$.

• 대한의용생체공학회:의공학회지
• /
• 제29권5호
• /
• pp.364-370
• /
• 2008

Recent development in large area flat-panel x-ray detector technology enables clinical application of digital tomosyntesis. Unlike conventional motion tomography using x-ray films, flat-panel x-ray detectors provide projection images in digital formats so that tomographic images can be synthesized in a more flexible way. For the digital tomosynthesis, precise movements of the x-ray source and the x-ray detector with respect to a fulcrum point are necessary. In this study, we apply the digital tomosynthesis technique to the flat-panel detector based micro-CT in which the flat-panel detector and the x-ray source rotate together on a circular arc. The experimental results suggest that flat-panel detector based 3D CTs can be used for digital tomosynthesis in the clinical environment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.157-163
• /
• 2003

This paper proposed a new type of vehicle detector using a MR sensor. and addressed detector's apparatuses and detecting algorithms. Proposed detector has been tested on a local highway between Mishiryong and Sokcho in Korea. Through extensive field tests, the outputs of the detector in response to various kinds of passing vehicles have been collected and analyzed. It is verified from the analyses that the outputs of the detector take on very different aspects with each vehicle, so that information on not only traffic count but vehicle types could be extracted from the outputs. And, with the proposed detector, traffic volumes on the two lanes in the tested region were measured and compared when both congested and clear traffic situations.

• ETRI Journal
• /
• 제16권1호
• /
• pp.17-34
• /
• 1994

In this paper, we present an architecture of the constant false alarm rate (CFAR) detector called the generalized order statistics (GOS) CFAR detector, which covers various order statistics (OS) and cell-averaging (CA) CFAR detectors as special cases. For the proposed GOS CFAR detector, we obtain unified formulas for the false alarm and detection probabilities. By properly choosing coefficients of the GOS CFAR detector, one can utilize any combination of ordered samples to estimate the background noise level. Thus, if we use a reference window of size N, we can realize $(2^N-1)$ kinds of CFAR processors and obtain their performances from the unified formulas. Some examples are the CA, the OS, the censored mean level, and the trimmed mean CFAR detectors. As an application of the GOS CFAR detector to multiple target detection, we propose an algorithm called the adaptive mean level detector, which censors adaptively the interfering target returns in a reference window.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.69-72
• /
• 2002

In this paper, adaptive minimum mean-squared error (MMSE) multiuser detector combined with decision-feedback detector (DFD) is considered fur near-far resistant DS-CDMA system. To provide a reliable input to the adaptive MMSE detector, multiple-access interference (MAI) is regenerated using bit estimates from DFD and subtracted from the received signal. In the adaptive MMSE detector, the effect of the imperfect cancellation is compensated by a least mean square (LMS) algorithm. Through the numerical results, it is shown that, in a near-far situation, the proposed scheme provides superior performance to the matched filter (MF) receiver, adaptive MMSE detector, and DFD in terms of the bit error rate (BER).

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.542-550
• /
• 2010

Cooled infrared detector is widely used as the core part in a variety of the thermal imaging systems. For the selection of the highly reliable cooled infrared detector with good performance, it is necessary for us to possess the characterization methods of the well defined performance index of cooled infrared detector. In this paper, various performance index of the cooled infrared detector including reliability as well as the optical and cooling performance of cooled infrared detector are defined and their characterization methods will be investigated and implemented systematically.

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1540-1547
• /
• 2000

In this paper, the performance of the MMSE multiuser detector is compared with the conventional detector with respect to the signal-to-noise ratio, the number of users and the Nakagami parameter under AWGN as well as Nakagami fading channel. The results show that the MMSE multiuser detector is superior to the conventional detector with respect to cancelling the multiple access interference. However, its drawback is the hardware's complexity. To solve this drawback, the advanced MMSE multiuser detector is presented, and its performance is analyzed. The number of taps in the advanced MMSE multiuser are independent of the processing gain. Thus, the system engineer can choose the appropriate number of taps in the detector to achieve a optimal trade-off between the hardware complexity and the performance of system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4372-4389
• /
• 2019

Spectrum sensing has attracted much attention due to its significant contribution to idle spectrum detection in Cognitive Radio Networks. However, specialized discussion is on complexity-based sensing strategy for spectrum sensing seldom considered. Motivated by this, this paper is devoted to complexity-based sensing strategy for spectrum sensing. Firstly, three efficiency functions are defined to estimate sensing efficiency of a spectrum scheme. Then a novel sensing strategy is proposed given sensing performance and computational complexity. After that, the proposed sensing strategy is extended to energy detector, Cyclostationary feature detector, covariance matrix detector and cooperative spectrum detector. The proposed sensing strategy provides a novel insight into sensing performance estimation for its consideration of both sensing capacity and sensing complexity. Simulations analyze three efficiency functions and optimal sensing strategy of energy detector, Cyclostationary feature detector and covariance matrix detector.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.916-921
• /
• 2024

The control rod worth sensitivity to the neutron detector position in the rod drop experiment is studied by the time-dependent Monte Carlo (TDMC) neutron transport calculations for AGN-201K educational reactor and the Kyoto University Critical Assembly. The TDMC simulations of the rod drop experiments are conducted by the Seoul National University Monte Carlo (MC) code, McCARD, yielding time-dependent neutron densities at detector positions. The detector-position-dependent results of the total control rod worth calculated by the extrapolation, the integral counting, and the inverse methods are compared with the numerical reference using the MC eigenvalue calculations and the experimental results. From these comparisons, it is observed that the total control rod worth can be estimated with a considerable difference depending on the detector position through the rod drop experiment. The proposed TDMC simulation of the rod drop experiment can be applied for searching a better detector position or quantifying a bias for the control rod worth measurement.