• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.347-355
• /
• 2007

The aim of this study was to evaluate the differences of salivary lead (Pb) and cadmium (Cd) concentrations, using ASV analysis, after various pre-treatment procedures. 10 unstimulated whole saliva samples of non-exposed subjects to Pb and Cd were collected. Each sample was divided into 6 aliquots and centrifugation was performed in only 3 aliquots. After centrifugation, 3 different types of pre-treatment procedures were carried out. Also, these pre-treatment procedures were carried out for another 3 aliquots, without centrifugation. Pre-treated aliquots were analyzed electrochemically, by ASV. The results are as follows: 1. Mean concentration of Pb in saliva after centrifugation was significantly higher than that of non-centrifugation. 2. In the detection sensitivity of Pb in saliva, those of simple dilution technique by HCl and acid digestion technique by nitric acid were significantly higher than that of simple dilution technique by electrolyte. 3. Mean concentration of Cd in saliva after centrifugation was significantly higher than that of non-centrifugation. 4. In the detection sensitivity of Cd in saliva, those of simple dilution technique by HCl and acid digestion technique by nitric acid were higher than that of simple dilution technique by electrolyte. But, there were no significant differences between them.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.277-285
• /
• 2004

We present a new hybrid stereo matching technique in terms of the co-operation of area-based stereo and feature-based stereo. The core of our technique is that feature matching is carried out by the reference of the disparity evaluated by area-based stereo. Since the reference of the disparity can significantly reduce the number of feature matching combinations, feature matching error can be drastically minimized. One requirement of the disparity to be referenced is that it should be reliable to be used in feature matching. To measure the reliability of the disparity, in this paper, we employ the self-consistency of the disunity Our suggested technique is applied to the detection of 3D line segments by 2D line matching using our hybrid stereo matching, which can be efficiently utilized in the generation of the rooftop model from urban imagery. We carry out the experiments on our hybrid stereo matching scheme. We generate synthetic images by photo-realistic simulation on Avenches data set of Ascona aerial images. Experimental results indicate that the extracted 3D line segments have an average error of 0.5m and verify our proposed scheme. In order to apply our method to the generation of 3D model in urban imagery, we carry out Preliminary experiments for rooftop generation. Since occlusions are occurred around the outlines of buildings, we experimentally suggested multi-image hybrid stereo system, based on the fusion of 3D line segments. In terms of the simple domain-specific 3D grouping scheme, we notice that an accurate 3D rooftop model can be generated. In this context, we expect that an extended 3D grouping scheme using our hybrid technique can be efficiently applied to the construction of 3D models with more general types of building rooftops.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.7
• /
• pp.308-316
• /
• 2002

In this paper, we propose a robust digital copyright-protection technique based on the concept of human auditory system. First, we propose a watermarking technique that accepts the various attacks such as, time scaling, pitch shift, add noise and a lot of lossy compression such as MP3, AAC WMA. Second, we implement audio PD(portable device) for copyright protection using proposed method. The proposed watermarking technique is developed using digital filtering technique. Being designed according to critical band of HAS(human auditory system), the digital filers embed watermark without nearly affecting audio quality. Before processing of digital filtering, wavelet transform decomposes the input audio signal into several signals that are composed of specific frequencies. Then, we embed watermark in the decomposed signal (0kHz~11kHz) by designed band-stop digital filer. Watermarking detection algorithm is implemented on audio PD(portable device). Proposed watermarking technology embeds 2bits information per 15 seconds. If PD detects watermark '11', which means illegal song. PD displays "Illegal Song" message on LCD, skips the song and plays the next song, The implemented detection algorithm in PD requires 19 MHz computational power, 7.9kBytes ROM and 10kBytes RAM. The suggested technique satisfies SDMI(secure digital music initiative) requirements of platform3 based on ARM9E core.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.5
• /
• pp.519-532
• /
• 2024

Anomaly detection for the penetration rate of tunnel boring machines (TBMs) is crucial for effective risk management in TBM tunnel projects. However, previous machine learning models for predicting the penetration rate have struggled with imbalanced data between normal and abnormal penetration rates. This study aims to enhance the performance of machine learning-based anomaly detection for the penetration rate by utilizing a data augmentation technique to address this data imbalance. Initially, six input features were selected through correlation analysis. The lowest and highest 10% of the penetration rates were designated as abnormal classes, while the remaining penetration rates were categorized as a normal class. Two prediction models were developed, each trained on an original training set and an oversampled training set constructed using SMOTE (synthetic minority oversampling technique): an XGB (extreme gradient boosting) model and an XGB-SMOTE model. The prediction results showed that the XGB model performed poorly for the abnormal classes, despite performing well for the normal class. In contrast, the XGB-SMOTE model consistently exhibited superior performance across all classes. These findings can be attributed to the data augmentation for the abnormal penetration rates using SMOTE, which enhances the model's ability to learn patterns between geological and operational factors that contribute to abnormal penetration rates. Consequently, this study demonstrates the effectiveness of employing data augmentation to manage imbalanced data in anomaly detection for TBM penetration rates.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.27-34
• /
• 2005

Iterative detection (ID) has proven to be a near-optimal solution for concatenated Finite State Machines (FSMs) with interleavers over an additive white Gaussian noise (AWGN) channel. When perfect channel state information (CSI) is not available at the receiver, an adaptive ID (AID) scheme is required to deal with the unknown, and possibly time-varying parameters. The basic building block for ID or AID is the soft-input soft-output (SISO) or adaptive SISO (A-SISO) module. In this paper, Reduced State SISO (RS-SISO) algorithms have been applied for complexity reduction of the A-SISO module. We show that serially concatenated CPM (SCCPM) with AID has turbo-like performance over fading ISI channels and also RS-A-SISO systems have large iteration gains. Various design options for RS-A-SISO algorithms are evaluated. Recently developed density evolution technique is used to analyze RS-A-SISO algorithms. We show that density evolution technique that is usually used for AWGN systems is also a good analysis tool for RS-A-SISO systems over frequency-selective fading channels.

• Journal of Internet Computing and Services
• /
• v.8 no.6
• /
• pp.43-53
• /
• 2007

Intrusion detection system(IDS) has recently evolved while combining signature-based detection approach with anomaly detection approach. Although signature-based IDS tools have been commonly used by utilizing machine learning algorithms, they only detect network intrusions with already known patterns, Ideal IDS tools should always keep the signature database of your detection system up-to-date. The system needs to generate the signatures to detect new possible attacks while monitoring and analyzing incoming network data. In this paper, we propose a new outlier cluster detection algorithm with density (or influence) function, Our method assumes that an outlier is a kind of cluster with similar instances instead of a single object in the context of network intrusion, Through extensive experiments using KDD 1999 Cup Intrusion Detection dataset. we show that the proposed method outperform the conventional outlier detection method using Euclidean distance function, specially when attacks occurs frequently.

• International Journal of Knowledge Content Development & Technology
• /
• v.14 no.3
• /
• pp.39-57
• /
• 2024

Plagiarism detection software is beneficial in detecting plagiarism in research works of postgraduate students. Despite the benefits of using plagiarism detection software, studies have revealed that most students, including postgraduates, do not use plagiarism detection software as expected. This could depend on the provision of facilitating conditions like internet connectivity, training opportunities and electricity. Thus, this study examined facilitating conditions and the use of plagiarism detection software among postgraduates of the University of Ibadan, Nigeria. A descriptive survey research design of the correlational type was used for this study, with a population of 2143 postgraduates. The multi-stage random sampling technique was used to determine the sample size of 242. The questionnaire was the research instrument, and data was analysed using descriptive statistics. Results showed that most postgraduates agreed that the university provided facilitating conditions like internet connectivity. The majority of the respondents noted that they used Turnitin monthly. Most of the respondents noted that they used plagiarism detection software to paraphrase their work and check the correctness of the grammar in their documents. The most prominent challenges confronting plagiarism detection software use by most respondents were their inability to afford subscription payment to use the plagiarism detection software and slow internet connectivity. There was a significant positive relationship between facilitating conditions and the use of plagiarism detection software by the postgraduates of the University of Ibadan, Nigeria. Some of the recommendations for the institution's management include leveraging the vast network of alumni willing to give back to the institution and intervening in the provision of internet connectivity and electricity.

• 전기의세계
• /
• v.16 no.5
• /
• pp.15-18
• /
• 1967

This paper shows the analysis for mechanisms of corona pulse caused by dielectric breakdown, and for the results of observed values on an actual machines with the this corona pulse technique. Although the above results are not directly related with the generation, numbers or wave of the corona pulse, it may possibly be chanced a judgement of dielectric breakdown and one of better synthetic judgement methods for actual electrical machines.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.316-323
• /
• 1995

This paper presents an image processing technique to get traffic information such as vehicle volume, velocity, and occupancy for measuring the traffic congestion rate. To obtain these information, two horizontal lines are previously set on the screen. A moving vehicle is detected using the gray level difference on each line, and also template matching method at night. Threshold values are determined by sampling pavement grey level, and updated dynamically to cope with the change of ambient light conditions. These technique is successfully used to calculate vehicle volume, occupancy, and velocity. This study can be applied to traffic signal control system for minimizing traffic congestion in urban areas.