• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.914-921
• /
• 2014

In this paper, an algorithm is suggested to detect an offset angle of the absolute rotor position sensor after the initial assembly of a PMSG. Unlike previous studies in a stationary state, this one is not designed to detect an electrical angle but rather the absolute position of the rotor is detected while operating the generator. Also,a position sensor, current sensors and voltage sensor were used to ensure reliability. This technique completes the detection of the sensor offset in two steps. In the first step, a zero-crossing of the EMF is measured using a voltage sensor to detect the electrical angle offset when the alternator is actuated by the engine. In the second step, a high frequency current is injected along the d-axis on-line during the control of the generation, eventually to obtain the inductance using a DFT (Discrete Fourier Transform), and then to ultimately extract the final electrical angle offset through the comparison of the inductance magnitude. The suggested algorithm was validated with PSIM simulation and, furthermore, was tested with actual experiments on a dynamometer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.146-153
• /
• 1990

A new 3-D segmentation-based coding technique is proposed for transmitting the motion video with reasonablly acceptable quality even at a very low bit rate. Only meaningful motion areas are extracted by using two change detection masks and a current frame is directly segmented rather than a difference frame itself so that a good quality of image can be obtained at high compression ratios. Through the experiments, the sequence of Miss America is reconstructed with visually acceptable quality at the very high compression ratio of 360:1.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.721-731
• /
• 2006

A fast intra skip detection algorithm based on the ratedistortion (RD) cost for an inter frame (P-slices) is proposed for H.264/AVC video encoding. In the H.264/AVC coding standard, a robust rate-distortion optimization technique is used to select the best coding mode and reference frame for each macroblock (MB). There are three types of intra predictions according to profiles. These are $16{\times}16$ and $4{\times}4$ intra predictions for luminance and an $8{\times}8$ intra prediction for chroma. For the high profile, an $8{\times}8$ intra prediction has been added for luminance. The $4{\times}4$ prediction mode has 9 prediction directions with 4 directions for $16{\times}16$ and $8{\times}8$ luma, and $8{\times}8$ chrominance. In addition to the inter mode search procedure, an intra mode search causes a significant increase in the complexity and computational load for an inter frame. To reduce the computational load of the intra mode search at the inter frame, the RD costs of the neighborhood MBs for the current MB are used and we propose an adaptive thresholding scheme for the intra skip extraction. We verified the performance of the proposed scheme through comparative analysis of experimental results using joint model reference software. The overall encoding time was reduced up to 32% for the IPPP sequence type and 35% for the IBBPBBP sequence type.

• Environmental Mutagens and Carcinogens
• /
• v.22 no.2
• /
• pp.90-96
• /
• 2002

Benzene is a widespread human carcinogen, inducing leukemia and hematotoxicity. Exposure to benzene metabolites has been shown to cause genetic damage, including aneusomy and chromosome aberrations. Fluorescence in situ hybridization(FISH) procedure was used to determine if the benzene metabolite, 1, 2, 4-benzenetriol(BT), hydroquinone(HQ) and trans, trans-muconic acid(t,t-MA) induced specific chromosomal change in HL-60 cells. Treatment with BT, HQ and t,t-MA resulted in the induction of monosomy 8 and 21 in HL-60 cells in a dose-dependent manner. All of these metabolites also induced trisomy 8 and 21, but no correlation between frequencies of trisomy and concentration was found. Translocations between chromosome 8 and another unidentified chromosome ［t(8:\ulcorner)］, and between chromosome 21 and another unidentified chromosome ［t(8:21)］ were found. However, translocation between chromosome 8 and 21 ［t(8:21)］ was not found. Results indicate that the benzene metabolites, BT, HQ and t,t-MA, induce chromosome specific numerical and structural aberrations, and the fluorescence in situ hybridization (FISH) approach may be a useful and powerful technique for detection of aneuploidy.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.93-99
• /
• 1998

Although laser interferometer measurement system has advantages of measurement range and accuracy, it has some disadvantages when measurement of multi degrees of freedom of motion are required. Because the traditional error measurement methods for geometric errors (two straightness and three angular errors) of a slide of machine tools measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric errors of a moving rigid body in real time processes, an on-line error measurement system for simultaneous detection of the five error components of a moving object is required. Using laser alignment technique and some optoelectronic components, an on-line measurement system with 5 degrees of freedom was developed for the geometric error detection in this study Performance verification of the system has been performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a slide of machine tools.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.55-61
• /
• 2009

The wall thinning defect of nuclear power pipe is mainly occurred by the affect of the flow accelerated corrosion (FAC) of fluid. This type of defect becomes the cause of damage or destruction of in carbon steel pipes. Therefore, it is very important to measure defect which is existed not only on the welding part but also on the whole field of pipe. This study use dual-beam Shearography, which can measure the out-of-plane deformation and the in-plane deformation by using another illuminated laser beam and simple image processing technique. And this study proposes Infrared thermography, which is a two-dimensional non-contact nondestructive evaluation that can detect internal defects from the thermal distribution by the inspection of infrared light radiated from the object surface. In this paper, defect of nuclear power pipe were, measured using dual-beam shearography and infrared thermography, quantitatively evaluated by the analysis of phase map and thermal image pattern.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.345-349
• /
• 2007

In this study a fuzzy trend monitoring method for detecting the engine mechanical faults was proposed through analyzing performance trends of measurement data. The trend monitoring is an engine conditioning method which can find engine faults by monitoring important measuring parameters such as fuel flow, exhaust gas temperatures, rotational speeds, vibration. etc. Using engine condition data set as a input which generated by linear regression analysis of real engine instrument data, an application of fuzzy logic in diagnostics estimate a cause of fault in each components.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.6
• /
• pp.1-6
• /
• 2008

This work proposes a fuzzy trend monitoring method for the fault detection of a gas turbine engine through analyzing measured performance data trend. The proposed trend monitoring technique can diagnose the engine status by monitoring major engine measured parameters such as fuel flow rate, exhaust gas temperature, rotor rotational speed and vibration, and then analyzing their time deppendent changes. In order to perform this, firstly the measured engine performance data variation is formulated using Linear Regression, and then faults are isolated and identified using fuzzy logic.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.35-46
• /
• 2000

In this paper, we propose a subband acoustic echo canceller using the weighted Overlap-add adaptive filter bank to prevent the decrease of convergence speed in full-band US processing, and make it possible to realize the adaptive filter in block-parallel processing, this paper introduces the weighted overlap-add technique for subband echo canceller. Moreover, we propose a new double-talk detector which employs dedicated filter in addition to the energy comparison method simultaneously. The computer simulation results show that the performance of the proposed subband adaptive echo canceller double-talk detection

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.63-68
• /
• 2016

Audio mixer is an electronic device which performs a mixing of multiple audio signals. Digital mixer having various functions and scalability is spreaded thanks to advanced DSP and IT technology. However, digital mixer is more vulnerable to stability comparing to conventional analog mixer in the digital error or software error sense because its control is executed by SW. To solve this problem, in this paper, we propose a multi-channel digital analog hybrid mixer scheme, digital mixer error detection mechanism and malfunctioning switching technique. Also we develop the audio mixer having digital-analog hybrid structure. By simulation, we can sense the error of digital mixer except power loss in a 120ms, change into analog mixer mode automatically and provide continuous broadcasting function without mixer function loss.