• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.106-112
• /
• 1990

본 논문은 디지탈 거리 계전 방식의 구현을 위해 최적 FIR 필터를 사용하는 알고리즘을 제시한다. 이 알고리즘은 고장 발생시 과도 현상에 의한 임피이던스 궤적의 영향 면에서 볼 때, 기존의 디지탈 거리계전 알고리즘이나 Kalman 필터를 이용한 거리계전 알고리즘 보다 훨씬 유리하여 고장 발생 시 빠르고 정확한 고장 판단과 고장점의 산출을 제공한다. 이러한 알고리즘은 EMTP를 통해 생성된 고장 데이타의 실시간 적용을 통해 입증되었고, 이의 실시간 구현은 모토롤라 DSP (Digital Signal Processor) 56001을 연산 전용의 프로세서로 사용한 디지탈 보호계전 시스템을 통하여 성공적으로 수행되었다.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.539-546
• /
• 2014

This paper describes an ultra-precision electronic clinometer, which is based on the capacitive-based fluid type, for detection of small inclination angles. The main parts of the clinometer low-noise electronics are two capacitance measurement circuits for converting the capacitances of the capacitors of the clinometer into voltages, and a differential amplifier for obtaining the difference of the capacitances, which is proportional to the input inclination angle. A 16 bit analog to digital (AD) converter is also embedded into the same circuit board, whose output is sent to a PC via RS-232C, for achieving a small noise level down to tens of ${\mu}v$. A compensation method, which is referred to as the delay time method for shortening the stabilization time of the sensor was also discussed. Experimental results have shown the possibility of achieving a measurement resolution of $0.0001^{\circ}$ as well as the quick measurement with the delay time method.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.834-841
• /
• 1996

Egg production in Korea is becoming automated with a large scale farm. Although many operations in egg production have been and cracks are regraded as a critical problem. A computer vision system was built to generate images of a single , stationary egg. This system includes a CCD camera, a frame grabber board, a personal computer (IBM PC AT 486) and an incandescent back lighting system. Image processing algorithms were developed to inspect egg shell and to sort eggs. Those values of both gray level and area of dark spots in the egg image were used as criteria to detect holes in egg and those values of both area and roundness of dark spots in the egg and those values of both area and roundness of dark spots in the egg image were used to detect cracks in egg. Fro a sample of 300 eggs. this system was able to correctly analyze an egg for the presence of a defect 97.5% of the time. The weights of eggs were found to be linear to both the projected area and the perimeter of eggs v ewed from above. Those two values were used as criteria to sort eggs. Accuracy in grading was found to be 96.7% as compared with results from weight by electronic scale.

• 한국항공우주학회지
• /
• 제39권5호
• /
• pp.451-457
• /
• 2011

레이저 조사 시 발생되는 플라즈마는 물질에 따라 특정한 파장의 빛을 방출하므로, 이 빛을 수집하여 물질의 구성 성분을 정성 정량적으로 분석할 수 있다. LIBS(Laser-Induced Breakdown Spectroscopy)는 실시간에 가까운 분석과 원거리 검출이 가능하다는 점에서 우주 자원 탐사 기술로 주목받고 있다. 본 연구에서는 달 환경, 즉 고진공 하에서의 성분 분석을 위하여 double-pulse LIBS 기법을 이용하여 LIBS 신호 세기를 크게 증가시켰다. 또한 시편에 레이저가 조사되는 각도를 조절하여 임의 형상 물질의 분석을 모사하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제20권E2호
• /
• pp.69-75
• /
• 2004

In this study, thin film gas sensor based on tin oxide was fabricated to examine its characteristics. Target gas is acetonitrile ($CH_3$CN) which is a blood simulant for the chemical warfare agent. Sensing materials are SnO$_2$ SnO$_2$/Pt, and Sn/Pt with thickness from 1000 to 3000 $\AA$. The sensor consists of a sensing electrode with inter-digit (IDT) type in front side and a heater in rear side. Resistance changes of sensing materials are monitored on real time basis using a data acquisition board with a 12-bit analog to digital converter. Sensitivities are measured at different operating temperatures also with different gas concentrations and film thickness. The high sensitivity is obtained for Sn (3000 $\AA$)/Pt (30 $\AA$) at 30$0^{\circ}C$ for 3 ppm. Response and recovery times were about 40 and 160 s, respectively. Repetition measurements showed very good results with $\pm$3% in full scale range.

• 한국인터넷방송통신학회논문지
• /
• 제13권4호
• /
• pp.221-227
• /
• 2013

본 논문에서는 제로 에너지 하우스의 에너지 절감을 모니터링하기 위하여 Zigbee 통신을 이용한 온 습도, 연기감지, 조도 및 CO2의 복합 센서 보드를 개발하고 이를 처리하는 프로토콜 등에 관하여 다루었다. 특히 센서를 장착시키는 실내 공간의 위치에 따라 제어하는 알고리즘이 달라지게 되므로 이를 무선인 Zigbee를 통하여 센서 장착 위치를 자유롭게 변경할 수 있다는 장점이 있으며. 또한 창을 통해 발생하는 에너지 손실을 줄일 수 있고 실내의 조명 제어에도 중요한 역할을 할 수 있는 시스템이다.

• Structural Engineering and Mechanics
• /
• 제32권6호
• /
• pp.787-809
• /
• 2009

Recent interest in the use of wireless sensor networks for structural health monitoring (SHM) is mainly due to their low implementation costs and potential to measure the responses of a structure at unprecedented spatial resolution. Approaches capable of detecting damage using distributed processing must be developed in parallel with this technology to significantly reduce the power consumption and communication bandwidth requirements of the sensor platforms. In this investigation, a damage detection system based on a distributed processing approach is proposed and experimentally validated using a wireless sensor network deployed on two laboratory structures. In this distributed approach, on-board processing capabilities of the wireless sensor are exploited to significantly reduce the communication load and power consumption. The Damage Location Assurance Criterion (DLAC) is used for localizing damage. Processing of the raw data is conducted at the sensor level, and a reduced data set is transmitted to the base station for decision-making. The results indicate that this distributed implementation can be used to successfully detect and localize regions of damage in a structure. To further support the experimental results obtained, the capabilities of the proposed system were tested through a series of numerical simulations with an expanded set of damage scenarios.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.515-525
• /
• 2011

도시형 자기부상열차 실용화사업에 적용된 유도무선루프방식 열차제어시스템에 대하여 최상위 레벨에서 전체 시스템에 대한 시스템 분류, 기능 분석을 시행하고 차상신호설비, 지상신호설비로 나누어 신뢰도, 가용도, 유지보수도 및 안전도를 수식을 통하여 분석한 결과를 제시하였다. RAM 분석은 신뢰도 블록도(RBD)를 각 장치별로 적용하여 시스템 서비스 가용도를 산출하였고, 안전도 분석은 PHA(예비위험원 분석), FMEA (고장모드영향분석), HAZOP을 통한 각각의 정상사상(Top Event)의 FTA(고장트리분석)을 시행하고 그 결과를 제시하여 RAMS 목표 값에 도달함을 수식을 통하여 증명하였다.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.69-76
• /
• 2017

Background: Time-resolved optically stimulated luminescence (TR-OSL) is a very useful method for calculating the lifetimes of crystalline quartz and feldspar. Materials and Methods: A compact TR-OSL system was developed, comprising a heater assembly manufactured using Kanthal wire, 2 powerful blue light-emitting diodes (LED, LXHL-PB02) for optical stimulation equipped with VIS liquid light guides, and a photomultiplier tube combined with an optical filter for luminescence detection. A pulse generated from the data acquisition board (NI PCI 6250) was used to initiate on/off signals in LED and TR-OSL measurements. Results and Discussion: The TR-OSL and background signals measured using this TR-OSL system using quartz samples were very similar to those reported in a previous study. Additionally, the lifetimes of the build-up and TR-OSL signals were calculated as $27.4{\pm}2.2{\mu}s$ and $30.3{\pm}0.6{\mu}s$, respectively, in good agreement with the findings of a previous study. Conclusion: It was concluded that the developed TR-OSL system was very reliable for TR-OSL signal measurements and lifetime calculations.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1275-1282
• /
• 2012

This paper proposes the 16-channel LED Driver IC for Full color LED display system. The proposed LED driver IC in this paper can draw current independent of temperature and supply voltage in each channel. Current flow in the channel is configurable via an external resistor. LED brightness is adjusted by 12-Bit PWM(Pulse Width Modulation) and 8-Bit DC(Dot Correction). A real-time monitoring of IC temperature ($130^{\circ}C/150^{\circ}C$) and LED status (open/short) is provided by LED driver IC and the user can receive warning and get information on problems. A 16-channel LED driver IC is produced using 0.35 um BCD process and the size is $2.5mm{\times}2.5mm$. In this paper, channel current characteristic and channel current control function were measured in order to verify am embodied 16-channel LED driver IC by producing a single IC test board.