• 제목/요약/키워드: desorption kinetics

검색결과 80건 처리시간 0.023초

Studies of the Organic Molecules Dissociative Surface Ionization in the Mass-Spectrometric Surface Ionization Method

  • Ilkhomjan Saydumarov;Dilshadbek Usmanov
    • Mass Spectrometry Letters
    • /
    • 제15권1호
    • /
    • pp.54-61
    • /
    • 2024
  • An improved voltage modulation method (VMM) was used to control the heat release and adsorption properties of the adsorbent. In this work, the voltage and flux modulation methods were considered under unified experimental conditions of dissociative surface ionization (SI) of polyatomic organic molecules, the criteria were found when under VMM conditions the current relaxation of SI carries information about the kinetic properties of thermal desorption of ionizable dissociation particles arriving on the surface of polyatomic molecules. Conditions were found under which the relaxation of the ionic current in the flux modulation method is determined by the kinetics of the heterogeneous dissociation reaction of the original polyatomic molecules. The values of the thermal desorption rate constant K+ and the activation energy E+ obtained with VMM for desorption of (CH3)2NCH+2 ions with m/z 58 by adsorption of imipramine and amitriptyline molecules agree well with each other and with the results for the desorption of the same ions by adsorption of other molecules. This confirms one of the basic conditions for the equilibrium process SI - the a degree (β coefficient) of the same particles SI on the same emitter surface is the same and does not depend on the way these particles are formed on the emitter surface.

Tetracycline 처리된 조직유도재생술용 차폐막의 약제유리양상 및 구조적 변화 (Desorption Kinetics and Structural Changes of Tetracycline Treated Barrier Membranes for Guided Tissue Regeneration)

  • 이성미;정현주
    • Journal of Periodontal and Implant Science
    • /
    • 제27권1호
    • /
    • pp.1-17
    • /
    • 1997
  • Tetracycline is known to be effective in eliminating periodontopathogens and have collagenolytic activity. This study was performed to observe the desorption kinetics and structural changes of tetracycline-treated barrier membranes for guided tissue regeneration. Four kinds of barrier membranes were tested : $Tefgen^{(R)}$(American Custom Medical, USA) and $Gore-Tex^{(R)}$(W.L. Gore & Associates Inc., USA) as nonresorbable membranes ; Resolut(polyglycolide & polylactide copolymer, W.L. Gore & Associates Inc., USA) and $Biomend^{(R)}$(collagen, Collatec Co., USA) as resorbable membranes. The membranes were cut into discs(diameter : 4mm) and were immersed in 5% tridodecylmethylammonium chloride(TIMAC) ethanol and air-dried. The membrane discs were absorbed with $100{\mu}g/ml tetracycline solution(pH8) for one minute and dried. For desorption kinetics, TC treated discs were immersed in phosphate buffered saline solution (PBS, pH 7.4). PBS was exchanged daily and TC concentration was measured by absorbance at 276nm on UV spectrophotometer. To measure remaining antibacterial activity, discs of 1 day to 4 weeks after desorption were placed on Mueller Hinton agar containing Bacillus cereus and incubated aerobically in $37^{\circ}C$ for twelve hours and the inhibition diameters were measured. To observe the structural change of membranes after TIMAC treatment or immersion in PBS, the membrane discs were examined under SEM. The results were as follows : 1. Total amounts of TC absorbed into membrane discs($0.7536mm^2$) were $2000{\mu}g$, $1800{\mu}g$, $2625{\mu}g$ and $2499{\mu}g$ for $Tefgen^{(R)}$, $Gore-Tex^{(R)}$, $Biomend^{(R)}$ and $Resolut^{(R)}$. 2. The concentration of TC released from barrier membrane discs was maintained over $4{\mu}g/ml$ until the fifth day in nonresorbable membranes and $Resolut^{(R)}$, but until the fourth day in $Biomend^{(R)}$, Until the ninth day in nonresorbable membranes and until the seventh day in resorbable membranes, the TC concentration was maintained over $1{mu}g/ml$. 3. The four membrane discs in the first day showed similar size of inhibition zone. One to four weeks later, the inhibition zone was much smaller in resorbable membrane discs than nonresorbable membrane discs. 4. Any structural change due to treatment of TIMAC was not observed on the nonresorbable membranes. $Resolut^{(R)}$ did not show any structural change except fibrillar loosening during immersion period, but Biomend showed destruction of membrane structure from the first week of immersion. This study indicates that tetracycline treated barrier membranes lead to the sustained release of tetracycline for over 7 days. This slow release pattern of tetracycline may contribute to the favorable clinical outcome of guided tissue regeneration.

  • PDF

Photochemical Kinetics of Maleic to Fumaric Acid on Silver Nanoparticle Surfaces

  • Jang, Nak-Han;Jeong, Dae-Hong;Suh, Jung-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권5호
    • /
    • pp.791-794
    • /
    • 2005
  • A visible photochemistry of maleic to fumaric acid adsorbed on silver nanoparticle surfaces was investigated as probed by SERS using a simple flow method. Photoisomerization of maleic to fumaric acid was consecutively observed in the condition of various flow rates, which varied the exposure time of laser beam. The sequential SERS spectra of maleic acid indicated that the photochemical isomerization and desorption took place simultaneously on silver nanoparticle surfaces as a function of laser fluency and wavelength. For 530.9nm laser line excitation, the rate constant coefficients were obtained with a = 5.9 $sec^{-1}$ mW for isomerization and b = 13.9 $sec^{-1}$ mW for desorption, which $k_1\;=\;aI^n\;and\;k_2\;=\;bI^m$. Both reactions were one photon process (n = 1, m = 1) of a visible light and relatively fast process whose decay time was in the range of milli-second for 50 mW laser power. The rate of photochemical reaction increased on going toward the blue and photodesorption was a dominant process. A simple flow method used in this study was very useful to study a relatively fast photochemical reaction of molecules adsorbed on silver nanoparticle surfaces.

Pd 박막 시료의 제작 조건이 수소 흡수-방출 동역학에 미치는 영향에 관한 연구 (The effect of Pd film evaporation condition on the kinetics of hydrogen absorption-desorption)

  • 엄대현;유정국;조영신
    • 한국수소및신에너지학회논문집
    • /
    • 제9권3호
    • /
    • pp.127-133
    • /
    • 1998
  • 각각 다른 기판온도에서 진공 증착법으로 제작된 Pd 박막들의(두께 ) 수소 흡수-방출 동역학을 실험하였다. 상, 온도영역에서 수소기체를 흡수-방출 시키면서 정방향과 역방향 활성화에너지를 구하고 반응엔탈피를 구하였다. 기판의 온도가 상온인 시료는 정반응 활성화에너지가 kcal/mol H이고 역방향은 kcal/mol H 반응엔탈피는 -2kcal/mol H였다. 기판의 온도가 인 시료는 정방향 활성화에너지 kcal/mol H 이고 역방향 활성화에너지 kcal/mol H였다. 기판의 온도가 상온인 시료의 구조적 치밀성, 온도변화에 따른 비저항 값의 변화율 등을 측정해 보았을 때 기판의 온도가 상온인 시료에 비하여 더 안정된 상태였지만 활성화 에너지의 오차값이 크게 얻어졌다.

  • PDF

Performance of an acidic extractant (D2EHPA) incorporated in IM used for extraction and separation of Methylene Blue and Rhodamin B

  • Aitali, S.;Kebiche-Senhadji, O.;Benamor, M.
    • Membrane and Water Treatment
    • /
    • 제7권6호
    • /
    • pp.521-537
    • /
    • 2016
  • Laboratory-scale experiments were carried out to investigate the adsorption equilibrium, the adsorption kinetics and facilitated transport of two cationic dyes (Methylene Blue (MB) and Rhodamine B (RB)) on Polymer Inclusion Membrane (D2EHPA-PIM). Different adsorption isotherms (Freundlich, Langmuir and Temkin models) as well as kinetics models indicated that the adsorption process is spontaneous and exothermic. Under the optimal conditions, the adsorption removal efficiencies reach about 93% and 97% for MB and RB respectively. Different extraction values by D2EHPA-PIM were obtained for the two cationic dyes: MB is weakly extracted at pH 2.0 (E% = 18.7%) whilst E% = 82.4% was observed for RB at the same pH. This difference was exploited in a mixture containg both the 2 cationic dyes for the selective extraction of RB at pH 2. Desorption of both dyes was achieved from the membrane by using acidic aqueous solutions and desorption ratio up to 90% was obtained. The formulas of the extracted complexes by the PIMs were, determined by the method of slopes. The dyes transport was elucidated using mass transfer analysis where in it found relatively high values of the initial flux ($J_0$) as 41.57 and $18.74{\mu}mol.m^2.s^{-1}$ for MB and RB respectively.

전기저항 측정법을 이용한 Pd박막의 수소화 특성 측정 (Measurement of Hydrogenation Characteristics of Pd Film by Using Electrical Resistivity Measurement Technique)

  • 조영신;이호재;이종숙
    • 한국수소및신에너지학회논문집
    • /
    • 제7권2호
    • /
    • pp.173-180
    • /
    • 1996
  • 4-probe resistivity measurement technique was used to study kinetics of hydrogen absorption-desorption on Pd film($520{\AA}$ thick) at room temperature upto 1 bar. Kinetics data are fitted well to 1st order kinetics equation in ${\alpha}$ and ${\alpha}^{\prime}$ phases. In ${\alpha}+{\alpha}^{\prime}$ phase, absorption kinetics was very complicated, but it could be explained partially with nucleation and growth process. Ln(dR/dt) vs. time plot gives rate constant k value(R is resistance of sample, t is time). k value for absorption is $4^{-6}{\times}10^{-4}/sec$ in ${\alpha}$ phase. k is increasing upto $4^{\times}10^{-2}/sec$ as hydrogen pressure increasing in ${\alpha}^{\prime}$ phase. k is proportional to ln(Pop/Peq), where Peq is equilibrium plateau pressure and Pop is the opposing pressure. In contrast to bulk sample k value was decreasing with increasing number of A-D cycling in ${\alpha}^{\prime}$ phase absorption.

  • PDF

수소 가압형 기계적 합금화법으로 제조한 MgHx-Nb2O5 산화물 복합 재료의 수소화 특성 평가 (Evaluations of Hydrogen Properties of MgHx-Nb2O5 Oxide Composite by Hydrogen Induced Mechanical Alloying)

  • 이나리;이수선;홍태환
    • 한국수소및신에너지학회논문집
    • /
    • 제23권5호
    • /
    • pp.429-436
    • /
    • 2012
  • Mg and Mg-based alloys are regarded as strong candidate hydrogen storage materials since their hydrogen capacity exceeds that of known metal hydrides. One of the approaches to improve kinetic is addition of metal oxide. In this paper, we tried to improve the hydrogenation properties of Mg-based hydrogen storage composites. The effect of transition metal oxides, such as $Nb_2O_5$ on the kinetics of the Magnesium hydrogen absorption kinetics was investigated. $MgH_x$-5wt.% $Nb_2O_5$ composites have been synthesized by hydrogen induced mechanical alloying. The powder fabricated was characterized by X-ray diffraction (XRD), Field Emission-Scanning Electron Microscopy (Fe-SEM), Energy Dispersive X-ray (EDX), BET and simultaneous Thermo Gravimetric Analysis / Differential Scanning Calorimetry (TG/DSC) analysis. The Absorption / desorption kinetics of $MgH_x$-5wt.% $Nb_2O_5$ (type I and II) are determined at 423, 473, 523, 573 and 623 K.

Atrazine의 토양 흡착 및 탈착에 미치는 접촉시간의 영향 (Aging Effects on Sorption and Desorption of Atrazine in Soils)

  • 박정훈
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권1호
    • /
    • pp.26-34
    • /
    • 2005
  • 토양과 유기화합물의 접촉시간은 흡착과 탈착의 특성에 영향을 미치는 중요한 요소 중의 하나이다. 본 연구에서는 atrazine의 토양 흡착과 탈착에 미치는 접촉시간의 영향을 연구하였다. 등온 흡착실험을 수행하여 토양과 수용액 사이의 분배계수를 구하였고, 탈착에 대한 동력학 실험을 수행하고 three-site desorption모델을 이용, 회기분석 하여 탈착속도 계수들을 추산하였다. atrazine과 토양의 접촉시간은 2일에서부터 8개월까지 변화시켰다. 2일 흡착에 대한 atrazine의 흡착등온 곡선은 거의 선형이었고$(r^2>0.97)$, 흡착분배계수는 토양의 유기탄소 함량과 강한 양의 상관관계를 가졌으며 사용한 모든 토양에서 접촉시간이 길어질수록 증가하였다. 흡착곡선에서의 비선형성은 Houghton muck토양을 제외하고는 접촉시간에 따라 증가하지 않았다. 탈착실험 분석으로부터 접촉시간이 증가함에 따라 equilibrium site분율은 감소하고 non-desorbable site 분율은 증가함을 알 수 있었다. 사용한 모든 토양에서 토양유기탄소 함량으로 표준화한 경우 desorbable sites 에서의 atrazine농도는 접촉시간에 따라 비교적 일정한 것에 비해 non-desorbable site에서의 atrazine농도는 접촉시간이 증가함에 따라 증가하였다.

Adsorption and Desorption of CO on W(110) Surfaces

  • Yang, Taek-seung;Jee, Hae-geun;Boo, Jin-Hyo;Han, Hyun-Seok;Lee, Gyung-Hee;Kim, Young-Dok;Lee, Soon-Bo
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권6호
    • /
    • pp.1115-1120
    • /
    • 2008
  • The adsorption of CO on W(110) surfaces was studied using thermal desorption spectroscopy (TDS), and core and valence level spectroscopy. At 120 K, CO forms a tilted structure at lower coverages ($\alpha$ 1), whereas it adsorbs normal to the surface at higher coverages ($\alpha$ 2). Tilted structures have been suggested to be precursors of dissociative chemisorption; however, experimental evidence is provided for the non-dissociative chemisorption of CO at temperatures above 900 K (which is referred to as the $\beta$ -state): TDS shows first order desorption kinetics. The core and valence level spectra of O/W(110) and those of $\beta$ -CO/W(110) are different. Most importantly, the 4$\sigma$ molecular orbital of CO can be identified in the valence level spectra of the $\beta$ -CO.

Desorption Kinetics and Removal Characteristics of Pb-Contaminated Soil by the Soil Washing Method: Mixing Ratios and Particle Sizes

  • Lee, Yun-Hee;Oa, Seong-Wook
    • Environmental Engineering Research
    • /
    • 제17권3호
    • /
    • pp.145-150
    • /
    • 2012
  • Pb-contaminated soil at a clay shooting range was analyzed by the sequential extraction method to identify metal binding properties in terms of detrital and non-detrital forms of the soil. Most of the metals in the soils existed as non-detrital forms, exchangeable and carbonate-bound forms, which could be easily released from the soil by a washing method. Therefore, the characteristics of Pb desorption for remediation of the Pb-contaminated soil were evaluated using hydrochloric acid (HCl) by a washing method. Batch experiments were performed to identify the factors influencing extraction efficiency. The effects of the solid to liquid (S/L) ratio (1:2, 1:3, and 1:4), soil particle size, and extraction time on the removal capacity of Pb by HCl were evaluated. Soil samples were collected from two different areas: a slope area (SA) and a land area (LA) at the field. As results, the optimal conditions at 2.8 to 0.075 mm of particle size were 1:3 of the S/L ratio and 10 min of extraction time for SA, and 1:4 of the S/L ratio and 5 min of extraction time for LA. The characteristics of Pb desorption were adequately described by two-reaction kinetic models.