• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.61-69
• /
• 2014

Carboxymethyl-${\beta}$-cyclodextrin (${\beta}$-CMCD), as a biodegradable surfactant with hydrophobic and hydrophilic properties, has potential advantages of being applicable to the simultaneous treatment of multiple contaminated soils. In this study, the desorption behaviors of r adionuclides such as cobalt (Co), strontium (Sr), and cesium (Cs) from the soil contaminated with them were experimentally investigated and the effectiveness of CMCD as a desorbent was evaluated. The desorption equilibrium of used radionuclides could be achieved within 1~3 hr and the desorption ratio from kaolin was higher than that from natural soil. The addition of CMCD of 2 g/L increased the desorption ratio by 5~20 % and the desorption ratio of used r adionuclides was shown in the order of Co > Cs > Sr. The experimental desorption data were fitted successfully by pseudo-second order kinetic model and the desorption rate of the r adionuclides was shown in the order of Cs > Co > Sr. Hysteresis between adsorption and desorption of the r adionuclides, as shown in the order of Sr > Co > Cs, increased as the desorption rate decreased. Consequently, it could be considered that the desorption rate was one of the significant factors of the hysteresis. The addition of CMCD as desorbent increased the amount of desorbed radionuclides and decreased the hysteresis. However, the CMCD could not completely desorb the radionuclides from soils even though the excess of CMCD was added.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.79-94
• /
• 2011

Black carbon (BC), a kind of high surface area carbonaceous material (HSACM), was isolated from Andong lake sediment. Sorption and desorption kinetics of naphthalene (Naph) and phenanthrene (Phen) in organic carbon (OC) and BC in the Andong lake sediment were investigated. Several kinetic models such as one-site mass transfer model (OSMTM), two-compartment first-order kinetic model (TCFOKM), and a newly proposed modified two-compartment first-order kinetic model (MTCFOKM) were used to describe the sorption and desorption kinetics. The MTCFOKM was the best fitting model. The MTCFOKM for sorption kinetics showed that i) the sorbed amounts of PAHs onto BC were higher than those onto OC, consistent with BET surface area; ii) the equilibration time for sorption onto BC was longer than those onto OC due to smaller size of micropore ($11.67{\AA}$) of BC than OC ($38.18{\AA}$); iii) initial sorption velocity of BC was higher than OC; and iv) the slow sorption velocity in BC caused the later equilibrium time than OC even though the fast sorption velocity was early completed in both BC and OC. The MTCFOKM also described the desorption of PAHs from the OC and BC well. After desorption, the remaining fractions of PAHs in BC were higher than those in OC due to stronger PAHs-BC binding. The remaining fractions increased with aging for both BC and OC.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.38-52
• /
• 2011

Sorption and sequential desorption experiments were conducted for Zn using a natural soil (NS) in background status by aging (1, 30 and 100 days). The sorption isotherm showed that Zn had high sorption capacity but low sorption affinity in NS. Sequential desorption was biphasic with appreciable amount of sorbed Zn residing in the desorption-resistant fraction after several desorption steps. The biphasic desorption behavior of Zn was characterized by a biphasic desorption model that includes a linear term to represent labile or easily-desorbing fraction and a Langmuirian-type term to represent desorption-resistant fraction. The biphasic desorption model indicated that the size of the maximum capacity of desorption-resistant fraction ($q^{irr}_{max}$) increased with aging in NS. Desorption kinetics and desorption-resistance of Zn in the soils collected from mine tailings (MA, MB and MC collected from surface, subsurface soils and mine waste, respectively) were investigated and compared to the bioavailability to earthworm (Eisenia fetida). Desorption kinetic data of Zn were fitted to several desorption kinetic models. The ratio ($q_{e,d}/q_0$) of remaining Zn at desorption equilibrium ($q_{e,d}$) to initial sorbed concentration ($q_0$) was in the range of 0.53~0.90 in the mine tailings which was higher than that in NS, except MA. The sequential desorption from the mine tailings with 0.01M Na$NO_3$ and 0.01M $CaCl_2$ showed that appreciable amounts of Zn are resistant to desorption due to aging or sequestration. The SM&T (Standard Measurements and Testing Programme of European Union) analysis showed that the sum of oxidizable (Step III) and residual (Step IV) fractions of Zn was linearly related with its desorption-resistance ($q^{irr}_{max}$) determined by the sequential desorption with 0.01M Na$NO_3$ ($R^2$= 0.9998) and 0.01M $CaCl_2$ ($R^2$= 0.8580). The earthworm uptake of Zn and the desorbed amount of Zn ($q_{desorbed}$ = $q_0-q_{e,d}$) in MB soil were also linearly related ($R^2$ = 0.899). Our results implicate that the ecological risk assessment of heavy metals would be possible considering the relation between desorption behaviors and bioavailability to earthworm.

• Journal of Environmental Science International
• /
• v.28 no.6
• /
• pp.561-570
• /
• 2019

A zeolitic material (Z-Y2) was synthesized from Coal Fly Ash (CFA) using a fusion/hydrothermal method under low-alkali condition (NaOH/CFA = 0.6). The adsorption performance of the prepared zeolite was evaluated by monitoring its removal efficiencies for Sr and Cs ions, which are well-known as significant radionuclides in liquid radioactive waste. The XRD (X-ray diffraction) patterns of the synthesized Z-Y2 indicated that a Na-A type zeolite was formed from raw coal fly ash. The SEM (scanning electron microscope) images also showed that a cubic crystal structure of size $1{\sim}3{\mu}m$ was formed on its surface. In the adsorption kinetic analysis, the adsorption of Sr and Cs ions on Z-Y2 fitted the pseudo-second-order kinetic model well, instead of the pseudo-first-order kinetic model. The second-order kinetic rate constant ($k_2$) was determined to be $0.0614g/mmol{\cdot}min$ for Sr and $1.8172g/mmol{\cdot}min$ for Cs. The adsorption equilibria of Sr and Cs ions on Z-Y2 were fitted successfully by Langmuir model. The maximum adsorption capacity ($q_m$) of Sr and Cs was calculated as 1.6846 mmol/g and 1.2055 mmol/g, respectively. The maximum desorption capacity ($q_{dm}$) of the Na ions estimated via the Langmuir desorption model was 2.4196 mmol/g for Sr and 2.1870 mmol/g for Cs. The molar ratio of the desorption/adsorption capacity ($q_{dm}/q_m$) was determined to be 1.44 for Na/Sr and 1.81 for Na/Cs, indicating that the amounts of desorbed Na ions and adsorbed Sr and Cs ions did not yield an equimolar ratio when using Z-Y2.

• Journal of Industrial Technology
• /
• v.1
• /
• pp.47-51
• /
• 1981

A Kinetic model of desorption of hydrogen in $Dy_2Co_7-H$ system has been suggested and rate equation of each step of the model has been compared with experimental results. The reat controlling step was hydrogen recombination in metal surface. The activation energy of over-all reaction was about 23kcal/mole.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.557-566
• /
• 2019

Radial and tangential water diffusion in Eucalyptus globulus wood was investigated using three mature trees from a forest in Khemis Sahel (North Morocco). Absorption and desorption kinetics experiments were conducted at ambient temperature ($25^{\circ}C$) and $30^{\circ}C$, respectively, and a relative humidity of 60%. The diffusion coefficients in the two directions were determined under imposed hygrothermal conditions; they were greater in the radial direction for the absorption as well as desorption processes. Convective drying under load, preceded by reconditioning and followed up by balancing, revealed the drying conditions that corresponded to the appropriate drying schedules for E. globulus wood. This was verified by measuring the cracks and bowsbefore and after drying of boards.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.125-132
• /
• 2006

Transient kinetics of $NH_3$ adsorption/desorption and of SCR(selective catalytic reduction) of NO with $NH_3$ were studied over vanadium based catalysts, such as $V_2O_5/TiO_2$ and $V_2O_5-WO_3/TiO_2$. In the present catalytic reaction process, NO adsorption is neglected while $NH_3$ is strongly chemisorbed on the catalytic surface. Accordingly, it is ruled out the possibility of a reaction between strongly adsorbed $NH_3$ and NO species in line with the hypothesis of an Eley-Rideal mechanism. The present kinetic model assumes; (1) non-activated $NH_3$ adsorption, (2) Temkin-type $NH_3$ coverage dependence of the desorption energy, (3) non-linear dependence of the SCR reaction rate on the $NH_3$ surface coverage. Thus, the surface heterogeneity for adsorption/desorption of $NH_3$ is taken into account in this model. The present study extends the pure chemical kinetic model based on a powdered-phase catalytic system to the chemico-physical one applicable to a realistic monolith reactor.

• Clean Technology
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2010

The characteristics of desorption reaction and the heating values of used activated carbons collected from the companies of Shiwha/Banwal industrial complex were investigated. The desorption characteristics of used activated carbons were analyzed based on the data obtained from a thermogravimetric analyzer. The activation energies and reaction orders for desorption reaction of used activated carbons were calculated by employing Freeman-Carroll method. Heating values of volatile organic compounds(VOC) desorbed from used activated carbons were estimated based on the data obtained from a total hydrocarbon analyzer. It was found that the reaction orders of desorption of used activated carbons were 0.1~0.8, their desorption activation energies, 6.9~26.4 kJ/mol, and VOC heating values, 0.4~10.7 kcal/kg.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.54-61
• /
• 2024

An improved voltage modulation method (VMM) was used to control the heat release and adsorption properties of the adsorbent. In this work, the voltage and flux modulation methods were considered under unified experimental conditions of dissociative surface ionization (SI) of polyatomic organic molecules, the criteria were found when under VMM conditions the current relaxation of SI carries information about the kinetic properties of thermal desorption of ionizable dissociation particles arriving on the surface of polyatomic molecules. Conditions were found under which the relaxation of the ionic current in the flux modulation method is determined by the kinetics of the heterogeneous dissociation reaction of the original polyatomic molecules. The values of the thermal desorption rate constant K⁺ and the activation energy E⁺ obtained with VMM for desorption of (CH₃)₂NCH⁺₂ ions with m/z 58 by adsorption of imipramine and amitriptyline molecules agree well with each other and with the results for the desorption of the same ions by adsorption of other molecules. This confirms one of the basic conditions for the equilibrium process SI - the a degree (β coefficient) of the same particles SI on the same emitter surface is the same and does not depend on the way these particles are formed on the emitter surface.

• Advances in environmental research
• /
• v.1 no.3
• /
• pp.223-236
• /
• 2012

Biosorption of methylene blue (MB) from aqueous solution was studied with respect to the point of zero charge of coconut husk, dye concentration, particle size, pH, temperature, as well as adsorbent and NaCl concentration using coconut husk biomass. Amongst Langmuir and Freundlich adsorption isotherms studied, Langmuir adsorption isotherm showed better agreement. Pseudo second order kinetics model was found to be more suitable for data presentation as compared to pseudo first order kinetics model. Also, involvement of diffusion process was studied using intraparticle diffusion, external mass transfer and Boyd kinetic model. Involvement of intraparticle diffusion model was found to be more relevant (prominent) as compared to external mass transfer (in) for methylene blue biosorption by the coconut husk. Moreover, thermodynamic properties of MB biosorption by coconut husk were studied. Desorption of methylene blue from biomass was studied with different desorbing agents, and the highest desorption achieved was as low as 7.18% with acetone, which indicate stable immobilization. Under the experimental conditions MB sorption was not significantly affected by pH, temperature and adsorbent concentration but low sorption was observed at higher NaCl concentrations.