• Journal of the Korean Magnetics Society
• /
• v.24 no.6
• /
• pp.179-185
• /
• 2014

The existing USB connection type of the clip-type pulsmeter equipped with a Hall sensor and a permanent magnet does not have any error or malfunction to measure the pulse wave. The property of the wireless networking system communicating the pulse wave data through the wireless LAN communication by combination USB with Ethernet and Ethernet to Wi-Fi converting system instead of existing USB connection method was investigated. There are exited that the patient needs to stay at close site of the desktop PC without USB connector and the wireless transfer and receiver networking system has pulse wave measurement SW to receive the pulse wave data. Thus it is expected that the study becomes helpful to measure and transfer the exact pulse wave of the patient in a comfortable pose at close range.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.675-691
• /
• 2002

The focus of this work is on the development of large-scale numerical optimization methods for optimal control of steady incompressible Navier-Stokes flows. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. We develop reduced Hessian sequential quadratic programming. Both quasi-Newton and Newton variants are developed and compared to the approach of eliminating the flow equations and variables, which is effectively the generalized reduced gradient method. Optimal control problems we solved for two-dimensional flow around a cylinder. The examples demonstrate at least an order-of-magnitude reduction in time taken, allowing the optimal solution of flow control problems in as little as half an hour on a desktop workstation.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.153-161
• /
• 2015

We propose a privacy-preserving location-based service (LBS) which supports top-k search service. The previous schemes hurt the privacy of either the user and the location of the objects because they are sent to the LBS server in a plaintext form. In the proposed method, by encrypting them with the fully-homomorphic encryption, we achieved the top-k search is possible while the information on them is not given to the LBS server. We performed a simulation on the proposed scheme with 16 locations where k is 3. The required time is 270 hours in a conventional desktop machine, which seems infeasible to be used in practice. However, as the progress of the hardware, the performance will be improved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1167-1172
• /
• 2017

Desktop computers, which were the main means of Internet use and information activity, were pushed out by smart devices that emphasized mobility and simplicity. The recent information production and consumption activities are performed through smart devices, but there is no input device for smart devices that can fully replace traditional input devices such as full-size PC compatible keyboards. Because of the small size of the virtual keyboard that uses the touch screen of the smart device, typographical error occurs at a high rate. In this paper, we propose a variable virtual keyboard that minimizes the typographical errors of the conventional virtual keyboards. The proposed method minimizes the user 's input error by adjusting the size of each key of the virtual keyboard based on accumulated dataset of position and pressure of the user' s input error even though there is no difference in the key position arrangement of the conventional virtual keyboards.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.225-231
• /
• 2020

In this paper, we propose a method to accelerate BWN based on FPGA with limited resources for embedded system. Because of the limited number of logic elements available, a single computing unit capable of handling Conv-layer, FC-layer of various sizes must be designed and reused. Also, if the input feature map can not be parallel processed at one time, the output must be calculated by reading the inputs several times. Since the number of available BRAM modules is limited, the number of data bits in the BWN accelerator must be minimized. The image classification processing time of the BWN accelerator is superior when compared with a embedded CPU and is faster than a desktop PC and 50% slower than a GPU system. Since the BWN accelerator uses a slow clock of 50MHz, it can be seen that the BWN accelerator is advantageous in performance versus power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.680-690
• /
• 2011

To support asynchronous collaboration among remote users, collaborative applications provide collaboration services and environment through virtual workspaces. In general, collaborative applications support collaboration based on desktop-based personal computers, using the features such as resource sharing or asynchronous communication among users. Unfortunately, since those applications mainly run on personal computers, they do not easily support collaborative works in various places. In this paper, we describe the development of smartphone collaborative application which provides effective collaboration facilities like resource sharing through various types of workspaces or group communication, communicating with a WebDAV-based collaboration server. The developed application provides users with high accessibility through multi-touch/touch-slide based user-interfaces in mobile environment. To support effective communication with a collaboration server, we also present a WebDAV-based collaboration library using a collaboration protocol designed to analyze easily the responses from the collaboration server.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.747-749
• /
• 2017

To protect financial services against danger of financial accidents and customer information leakage caused by malware, injection attack and so on, Financial Services Commission announced "Financial Networks Security Enhancement Comprehensive Plan", which suggests the guideline of protecting customer information and providing secure financial services by separating network topology and then makes the financial company use network partitioning system. In consequence of this policy, financial companies respectively chose between the physical partitioning mechanism or the logical partitioning mechanism according to their IT environment. This paper suggests an efficient infrastructure configuration plan for making the logical network partition, by comparison of a construction of traditional general equipment and an integrated HCI(Hyper Converged Infrastructure) through 'Hyper Converged' which is one of virualization techniques for developing currently, and the case study of the integrated HCI method.

• The KIPS Transactions:PartA
• /
• v.15A no.2
• /
• pp.101-110
• /
• 2008

Ubiquitous computing has extended the computer system into the whole physical space and has ushered the emergence of more dynamic distributed systems. This environment require unique QoS parameters for various devices, resources and user requirements. In this paper, we propose a new hybrid QoS management model which defines a static-dynamic QoS parameter that is more appropriate to the ubiquitous computing environment. This model consists of the QoS Control Management Module(QoS CMM) in the client side and the Resource QoS Management Module (RQoS MM) in the server side. The RQoS MM deals with the static QoS parameters and the whole QoS control of the distributed control(QoS CMM) in order to minimize server load in cases of multiple communication. Finally, we present the experimental result of our location based application using a graphical user interface that shows the multimedia service execution of selected client device types such as desktop PC, notebook and PDA.

• Journal of Digital Contents Society
• /
• v.11 no.4
• /
• pp.597-606
• /
• 2010

This paper describes a real-time camera tracking framework specifically designed to track a monocular camera in an AR workspace. Typically, the Kalman filter is often employed for the camera tracking. In general, however, tracking performances of conventional methods are seriously affected by unpredictable situations such as ambiguity in feature detection, occlusion of features and rapid camera shake. In this paper, a recursive Bayesian sampling framework which is also known as the particle filter is adopted for the camera pose estimation. In our system, the camera state is estimated on the basis of the Gaussian distribution without employing additional uncertainty model and sample weight computation. In addition, the camera state is directly computed based on new sample particles which are distributed according to the true posterior of system state. In order to verify the proposed system, we conduct several experiments for unstable situations in the desktop AR environments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.635-643
• /
• 2007

As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers' faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesn, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet.