• Journal of Fashion Business
• /
• v.1 no.4
• /
• pp.49-54
• /
• 1997

Methods of the flare skirt pattern making are presented variously among foreign and domestic test books. Three of them are : First the method is using the basic skirt pattern, secondly the method is quartering rectangle of skirt length $\times\frac{W}4$, finally the method is substituting waist size for formula. But, these books don't include the calculating method of the hem circumference. This calculating method express the shape of flare skirt and the using length of trimming -race and frill-. This study aims at proposing the calculating formula of the hem circumference and the standardization of pattern making technical skill. The result were as follows. 1. The calculating formula of hem circumference had regular ratio in $180^{\circ}$, $270^{\circ}$ and $360^{\circ}C$ flare. That was (HEM) = $(\frac{(5\;{\times}\;(W\;+\;1)}{4\;{\times}\;A}+(SK.L))\;{\times}\;A\;{\times}\;0.785$. A was 4 in $180^{\circ}$, 6 in $270^{\circ}$, 8 in $360^{\circ}$. 2. The error of hem circumference from 46 to 86 centimeter of waist size was between 0.11875 and -0.63125 centimeter in $180^{\circ}$, $270^{\circ}$ and $360^{\circ}$ flare skirt. This formula was less in the error.

• Journal of Korean Society for Quality Management
• /
• v.41 no.1
• /
• pp.1-14
• /
• 2013

Purpose: The purpose of this research was to investigate the spread pattern of Korean legal certification systems and their impact on industry performance. Methods: It first analyzes the life cycle of legal certification systems and classifies them into four categories based on the spread patterns in a chronological view. A survey study is then conducted to find out the impact of legal certification systems on financial performance. Both the legal mandatory certification systems and the legal voluntary certification systems are included in the survey. Results: Four spread patterns of legal certification systems are sustainable growth, stagnation after growth, decrease after growth, and repetition of growth and declination. 56% of 293 certified corporations responded positively about the financial impact of their certification systems. Conclusion: The policy makers can utilize the results of this study in designing additional certification systems as well as promoting the current legal certification systems.

• Archives of design research
• /
• v.15 no.1
• /
• pp.81-92
• /
• 2002

Through network draft, it′s possible to describe curve draft with main motive in a lobby loom and to fulfill draft design more conveniently thanks to the development of computer device. Network draft was introduced by Alice Schlein, who is an American weaving artist, and I had ever published research paper on "The unfolding and development of network draft using computer dobby system" . The purpose of the next study was to develop the design of network draft while do make a design network draft in a dobby loom with 16 shafts, and could reach follow conclusion as a result of designing a variety of drafts. The initial of 4-end in a loom with 16 shafts was a basic condition to describe more perfect shape in comparison with draft in 8 shafts through the development of network. The development of draft line was essential to deride the pattern of fabric, and the pattern of draft is decided according to selecting key peg plan. Thereby, could get a variety of draft patterns derive from mix key peg plan with initial selected by developing the kind of draft line and applying diverse key peg plan. As for the variation and diversification of draft line, the shape of patters varied depending col the curve extent and connectivity of draft line and the size of curve. The pattern of network draft can be changed infinitely by free round curve of draft line. In addition, a variety of draft designs shall be developed by increasing the number of shaft, enlarging the scale of draft line, and developing more creative draft line.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.220-229
• /
• 2021

This study is aimed to a textile design with a motif of korean endemic plants and a method for printing it in an eco-friendly manner. The floral pattern with the motif of korean endemic plants was designed using Illustrator and Photoshop program. CMYK color, which is the basic color of Digital Textile Printing (DTP), is based on natural dyes, and various colors, achromatic colors and pastel tones are applied. As a result, half-linen and cotton were suitable as a result of designing and applying a floral pattern of a korean special plants. Also, as a result of analyzing the printing effect by colorway and DTP for each material, it was printed uniformly and the washing fastness was good. However, fastness of color change showed low, indicating that a follow-up study was needed. This study contributes to environmental conservation through eco-friendly printing and the korean endemic plants will be interested in people around the world beyond korea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.945-962
• /
• 2022

This study examines the use of traditional patterns by new Hanbok brands. A Saekdong print pattern based on previous research was developed and applied to clothing designs. A total of 488 images of printed products from the seven new Hanbok brands and 219 images from the collections of the National Folk Museum of Korea were analyzed. Traditional patterns accounted for 47.4% of the total printed products of the new Hanbok designs, with the following ratio of use, in descending order: flower patterns, traditional paintings, animals, geometrical designs, Dancheong, text and others, Jogakbo, and Saekdong. Saekdong was found in three brand products, and the color or shape was modified. To develop the Saekdong image, five colors - red, yellow, blue, white, and green - were selected. The ratio of use for each color and the width of each color were determined with reference to previous studies. The average color value was determined through color analysis of the Saekdong collections. A total of seven items were designed for the print pattern, and four items were added for coordination to consist of four styles. This study aims to use the results of this analysis to provide insights into product development using traditional patterns.

• The Research Journal of the Costume Culture
• /
• v.14 no.4
• /
• pp.609-624
• /
• 2006

The purpose of this study is to give the guideline to the pattern designing by supplying various images of the transformed shape of tailored collar with the location and angle of gorge line and laying measurement of the tailored collar while designing the tailored collar. The results of this study are as follows : Images of the sample at the case of 1cm of laying measurement looks 'urban', 'light', 'sharp', 'young', 'fashionable' and 'narrow' than that at the case of 7cm. When the laying measurement increases, the image of the sample looks more 'classical' and 'boorish'. The image of the sample 'light', 'sensuous' and 'young' at the case of sample of which laying measurements of the collar was 3cm. Second, at the case of sample whose laying measurements of the collar was 5cm, it was shown that the low location of gorge line made the image of the sample 'soft' and 'short'. On the other hand the image of the sample looked 'hard', 'keen' and 'long' by the high location of gorge line. Third, at the case of sample of which laying measurements of the collar was 7cm, low location of gorge line made the image of the sample look short. However, normal location of gorge line made the image of the sample looked 'fashionable'. The images of the samples of which laying measurements of the collar were 3cm, 5cm and 7cm, respectively, had changed with the angle of gorge line. First, the high angle of gorge line made the image of the sample 'rigid' and 'keen' at the case of sample of which laying measurements of the collar was 3cm. The high angle of gorge line made the image of the sample looked 'boorish' and 'singular'.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.146-150
• /
• 2009

Present family pattern of Korean society has been changed into nuclear family pattern based on the married couple from traditional expanded family pattern. As the entire social consciousness has been changed into private disposition, the number of independent household for 1 person has increases. Also, as the delivery age of first child became late according to the elongation of average period for the national education, the increment of average age for the first marriage and women's participation in the society, the family pattern of married couple lasts longer than used to be. Like this, considering the family formed period comprised from a household for 1 person to a household for 1married couple and senescence increase, as any response is inevitable for the requirement of residential space where 1~2 dwellers' life can be accepted economic and functionally within smaller scaled space, development and research on a plan system(flexible-typed plan) increasing the degree of freedom is required in developing plan of unit household. In the study for this, considering the change of population and social structure, I suggest the method in developing economic design responding to the differentiation, designing the change of support-system and infill-system based on the systemic comprehension about the residing environment in the family formation period and the research for main life pattern and residing environment in the family formation period in the present city life. I will set (family) composing system, develop basic and mixing typed standard model and establish the stage of applied development for the development of economic design.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

This paper presents a novel user interface system which aims at easy controlling of mobile devices. The fundamental concept of the proposed interface is to launch an appropriate function of the device by sensing and recognizing the grip-pattern when the user tries to use the mobile device. To this end, we develop a prototype system which employs capacitive touch sensors covering the housing of the system and a recognition algorithm for offering the appropriate function which suitable for the sensed grip-pattern. The effectiveness and feasibility of the proposed method is evaluated through the test of recognition rate with the collected grip-pattern database.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.183-196
• /
• 2015

This study aims to develop sleeve pattern of tailored jacket which shows seamlessly beauty of females in their twenties who have relatively smaller change of body compared people of other ages and has outstanding functional operation. So we selected a pattern of manufacturer who received highest score after evaluating wearing condition of three types of jacket in the industry, whose targets are career women in their twenties and then tested its appearance and functional operation of 6 experimental jackets with armhole depth of B/4 and B/4-1(cm) along with sleeve cap height of A.H/3, A.H/3+1, A.H/3+2. As a result, the pattern which has good result of external appearance evaluation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+2 as well as sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+1. The pattern of good result for movement adaptation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3 as well as sleeve with armhole depth of B/4 and sleeve cap height of A.H/3. So we could find that the larger is the armhole depth and height of sleeve, the better influence on adaptability of jacket it makes and that the smaller is the armhole depth and height of sleeve, the better influence on movement adaptability of jacket it makes. It has been proved that armhole depth of tailored jacket of females in their twenties doesn't affect significantly on its appearance when designing it but it makes good influence on movement adaptability when experimental clothing has armhole depth of B/4-1and that sleeve cap height of A.H/3 that is 1cm shorter than A.H/3+1 which is used in industry makes good influence on appearance and functional operation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.154-162
• /
• 2003

In this paper, Associative Memory with Cellular Neural Networks classifies and recognizes image patterns as an operator applied to image process. CNN processes nonlinear data in real-time like neural networks, and made by cell which communicates with each other directly through its neighbor cells as the Cellular Automata does. It is applied to the optimization problem, associative memory, pattern recognition, and computer vision. Image processing with CNN is appropriate to 2-D images, because each cell which corresponds to each pixel in the image is simultaneously processed in parallel. This paper shows the method for designing the structure of associative memory based on CNN and getting output image by choosing the most appropriate weight pattern among the whole learned weight pattern memories. Each template represents weight values between cells and updates them by learning. Hebbian rule is used for learning template weights and LMS algorithm is used for classification.