• International Journal of Precision Engineering and Manufacturing
• /
• 제4권1호
• /
• pp.37-42
• /
• 2003

Active control of flexural vibrations of smart laminated composite beams has been carried out using piezoceramic sensor/actuator and viscoelastic material. The beams with passive constrained layer damping have been analyzed by formulating the equations of motion through the use of extended Hamilton's principle. The dynamic characteristics such as damping ratio and modal damping of the beam are calculated for various fiber orientations by means of iterative complex eigensolution method. This paper addresses a design strategy of laminated composite under flexural vibrations to design structure with maximum possible damping capacity.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.33-40
• /
• 2012

Objective: Service industry has become the most important industry among various economic activities, as the percentage of service related industry in advanced nations is over 60% of their GDP and the percentage of service industry in South Korea, a traditional manufacturing nation, now takes up over 60% of the entire economy. Background: Such industry paradigm shift has changed consumers from those that simply purchased products into groups of people that evaluate the companies that manufacture products, thereby further intensifying competition among companies and increasing the importance of integrated communication between companies and consumers. However, the excessive existence of sub-identities that have been developed for integrated management of the existing corporate identities, as well as the undifferentiated general management strategies by companies are creating confusion not only for consumers but also for various corporate interest parties. In addition, service identity strategy has become the most important strategy than any other sub-identity strategies in forming corporate identity at the increased importance of corporate service in the era of service industry. However, the current domestic circumstance is that the concept of service identity has not been well established through specific related studies. Method: Accordingly, the existing academic and field studies on the corporate identity(CI), brand identity(BI) and product identity(PI) used for the communication with consumers were reviewed in this study to establish and summarize the concept of service identity(SI) that appeared at the service economization. Results: The purpose is to examine the kind of change that could be brought about by SI for the corporate integrated identity strategy developed through the existing corporate, brand & product image in order to present a new direct in corporate identity strategy according to the industry paradigm shift through a SI centered new corporate identity framework. Conclusion: For preparing the new era of service industry, the corporate integrated identity strategy must be integrate with concept of service identity and which is essential to differential from other companies. Application: The proposed concept and framework of service identity on this paper will help to understand and clearly define why service identity is important factor of the new idea of corporate identities.

• 산업경영시스템학회지
• /
• 제33권1호
• /
• pp.17-23
• /
• 2010

The corporate R&D(Research and Development) has a primary role of new product development and its potential is the most crucial factor to estimate corporate future value. However, its systemic inadequacies and inefficiencies, the shorten product life-cycle to satisfy customer needs, the global operations by outsourcing strategy, and the reduction of product cost, are starting to expose to R&D business processes. The three-phased execution strategy for R&D innovation is introduced to establish master plan for new R&D model. From information technology point of view, PLM(Product Life-cycle Management) is one of the business total solutions in product development area. It is not a system, but the strategic business approach that collaboratively manage the product from beginning stage to end of life in all business areas PLM functions and capabilities are usually used as references to re-design new R&D process. BPA(Business Process Assessment) and 5DP(Design Parameters) in PI6sigma developed by Samsung SDS Consulting division are introduced to establish R&D master plan and re-design process respectively. This research provides a case study for R&D process innovation. How process assessment and PMM(Process Maturity Model) can be applied in business processes, and also it explains process re-design by 5DP method.

• 한국과학예술포럼
• /
• 제20권
• /
• pp.159-171
• /
• 2015

Service elements are added to the product to improve the company it its sales and innovation. The servitization process could take many different routes reflecting various properties of the manufacturing firm and its business contexts. Product-service systems (PSS) design method developed at Sungkyunkwan Universty, Service Design Institute, has been applied to a small furniture manufacturing company to demonstrate the utility of the method and to devise improvements. First, the business context of the company has been analyzed and key values have been identified. A co-creative session has been conducted to develop initial service concepts to drive those key values. The diverse positioning of those service concepts on the scale of service supporting product and service support customer is then developed to plan servitization phases. The specific service concepts are about company-customer relationship building as well as customization and personalization in this case. Initial service concepts are detailed with service blueprint so that prototyping and customer experience evaluation can be done. Business models in different servitization phases are designed. Further prototyping and customer experience evaluation has been done with business strategy improvements. In this paper, the proudct-service systems design method has been reviewed and the specific and real processes of the servitization using design will be described with discussion on the improvement of the method and the enhancement of the business.

• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.11-19
• /
• 2006

For several years, a research about the simulation for shipyard and shipbuilding has been performed. This research is based on the concept of PLM (Product Lifecycle Management) and DM (Digital Manufacturing). Global leading companies and research center are trying to get a good position of PLM, especially M&S field. Digital shipbuilding is to computerize shipyard facilities and shipbuilding processes, and to simulate expected scenarios of shipbuilding processes using a computer model in order to resolve a potential problem such as a bottleneck processes, and over loaded resources. In this paper, simulation methodology for shipbuilding is described. In addition, a local and global strategy for the use of simulation methodology is suggested. Finally, case studies about an indoor shop and an outdoor shop are described.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 압출 및 인발 심포지엄
• /
• pp.20-23
• /
• 1999

The current three-stage cold extrusion process including upsetting to produce a flange is investigated for the purpose of improvement of manufacturing process. The main goal of this study is to obtain an appropriate process sequence which can produce the required part most economically without overloading of tools and select an appropriate process for reducing manufacturing cost. The current process sequence is simulated and design criteria are examined. Based on the results of simulation of the current three-stage process, a design strategy for improving the process sequence is developed using the thick-wall pipes. Based on the results of simulation of the one-stage processes, the forming processes of a flange for improving the conventional process are proposed.

• 산업공학
• /
• 제20권3호
• /
• pp.257-266
• /
• 2007

To survive in rapidly changing business environment, the enterprises of all over the world are trying to integrate their IT infra structure and are trying to automate their business process. Service Oriented Architecture (SOA) is being accepted as an IT standard to support efficient system integration and flexible business process automation between enterprises or departments. The material control system is required this software architecture between manufacturing company and materials supply vendors. This paper introduces concept of SOA, relevant technology about SOA such as Web Services and Business Process Execution Language (BPEL) and Enterprise Service Bus (ESB) and describes how to automate materials control process by designing the material control system based on SOA. The analysis of requirements is proceeded by Unified Modeling Language (UML) and SOA delivery strategy is selected the top-down strategy. And this paper describes how to derive services and operations and how to arrange services in three service layers and how to design business process.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.87-105
• /
• 2012

The purpose of this case study is to demonstrate the effectiveness of the disruptive innovation strategy based on the Resources Process Values(RPV) theory for a successful firm. Disruptive innovations seemed not initially perform well enough to be sold or used successfully in markets. The products and services used disruptive technologies have not been as effective as those used in the established markets. However, they have other attributes such as simplicity, convenience, and low cost, which appeal to a new, small and initially unattractive set in new or low-end applications. The Hyundai Heavy Industries Co.(HHI) performed the Jubail Industrial Harbour Project(JIHP), which built the Open Sea Tanker Terminal(OSTT) in Saudi Arabia, using the disruptive innovation strategy in order to lower the manufacturing cost of the offshore jacket and to complete the project successfully. The HHI developed the design and drawing systems to manufacture the jacket and also developed the HYundai Jacket Analysis System(HYJAS) software to use the structural analysis against stresses from rolling and pitching of the barge while transporting the jacket by sea.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.81-85
• /
• 2003

The industry has undergone a significant change over the last decade: digital business has become a strategy to survive; the extended enterprise is being implemented; parts are made where conditions are most favourable; non-core activities are out-sourced; advanced manufacturing systems and information technologies are introduced to improve manufacturing performance. Suppliers and distributors become part of the supply chain and they all comprise an integrated international co-operative network to provide manufactured goods and support services for a world market just in time, at low prices and with quality surpassing customers' expectations. In this paper, we review various state-of-the-art information technologies for the shipbuilding industry. The successful introduction and implementation of those technologies will be the key enabler for e-transformation in the shipbuilding industry.

• 디지털융복합연구
• /
• 제18권3호
• /
• pp.71-81
• /
• 2020

본 연구는 화장품 제조판매원과 화장품 전문 제조원의 명성 및 제품유형이 지각된 품질에 미치는 영향에 대해 검증해 보고자 하였다. 이를 위해 2×2×2 요인설계를 이용하여 8개 집단을 대상으로 실험을 진행했다. 연구결과 첫째, 제조판매원의 명성과 제조원의 명성은 고 명성이 저 명성에 비해 지각된 품질을 보다 높게 인식하는 것으로 나타났다. 둘째, 제조판매원과 제조원의 명성은 지각된 품질에 상호작용 효과를 나타내는 것으로 확인되었다. 셋째, 제조판매원과 제품유형은 지각된 품질에 상호작용 효과를 나타내는 것으로 확인되었다. 마지막으로 제조원과 제품유형은 지각된 품질에 상호작용 효과를 나타내는 것으로 확인되었다. 이러한 결과는 화장품 업계에 있어 제조판매원의 명성 뿐 아니라 제조원의 명성 또한 매우 중요하다는 사실을 실증적으로 보여줌으로써 제조판매원과 제조원의 제품생산 및 마케팅 전략방안 모색에 매우 유용한 정보를 제공해 줄 수 있을 것으로 기대한다.