• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.176-183
• /
• 1995

The design process of pre-cast concrete member needs various design parameters and the engineer's experiences. The introduction of knowledge-based system in the design of pre-cast concrete member enables us to design complicated members using the designer's heuristics. The objectives of this research are to study useful methodology for representing knowledge and data in the development of knowledge-based system and to show the application of methodology by developing a prototype sysytem for design of pre-cast concrete member. This paper nrst describes methodology for building knowledge-based system. It then presents knowledge-based system for pre-cast concerete member design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1458-1466
• /
• 2004

Deterministic optimum designs that are obtained without consideration of uncertainties could lead to unrealiable designs. Such deterministic engineering optimization tends to promote the structural system with less reliability redundancy than obtained with conventional design procedures using the factor of safety. Consequently, deterministic optimized structures will usually have higher failure probabilities than unoptimized structures. This paper proposes the reliability based design optimization technique fur apressure tank considering temperature effect. This paper presents an efficient and stable reliability based design optimization method by using the advanced first order second moment method, which evaluates a probabilistic constraint for more accuracy. In addition, the response surface method is utilized to approximate the performance functions describing the system characteristics in the reliability based design optimization procedure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.415-422
• /
• 1999

This paper describes a new optimum design approach for piled raft foundations using the genetic algorithm. The objective function considered is the cost-based total weight of raft and piles. The genetic algorithm is a search or optimization technique based on nature selection. Successive generation evolves more fit individuals on the basis of the Darwinism survival of the fittest. In formulating the genetic algorithm-based optimum design procedure, the analysis of piled raft foundations is peformed based on the 'hybrid'approach developed by Clancy(1993), and also the simple genetic algorithm proposed by the Goldberg(1989) is used. To evaluate a validity of the optimum design procedure proposed based on the genetic algorithm, comparisons regarding optimal pile placement for minimizing differential settlements by Kim et at.(1999) are made. In addition using proposed design procedure, design examples are presented.

• Computers and Concrete
• /
• v.6 no.2
• /
• pp.95-108
• /
• 2009

In the current research, a displacement-based seismic design scheme to retrofit reinforced concrete columns using FRP composite materials has been proposed. An accurate prediction for the nonlinear flexural analysis of FRP jacketed concrete members has been presented under multiaxial constitutive laws of concrete and composite materials. Through modification of the displacement coefficient method (DCM) and the direct displacement-based design method (DDM) of reinforced concrete structures, two algorithms for a performance-based seismic retrofit design of reinforced concrete columns with a FRP jacket have been newly introduced. From applications to retrofit design it is known that two methods are easy to apply in retrofit design and the DCM procedure underestimates the target displacement to compare with the DDM procedure.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.360-370
• /
• 1999

The paper proposed a basic architecture of an agent system to support exchange and sharing of design informations by means of ACL(Agent Communication Language) which can represent design informations and knowledges. Based on the architecture of the agent system a ship initial design agent system was implemented in order to show the effectiveness of the agent-based system. The basic architecture of the agent consists of an ACL handlerand CORBA(Common Object Request Broker Architecture) objects for the exchange of ACL messages in the heterogeneous and distributed environment. The ACL handler can process expressions of knowledge and manage communication messages among the agents. The paper mainly focuses on the implementation of the ACL handler. The ACL handler consist of a KQML(Knowledge Query and Manipulation Language) handler that manages KQML messages, a conversation module, and a content handler that handles message contents. The conversation modulo implements conversation policies and checks all messages if they are allowable and meaningful messages based on the conversation policies. The implemented agent-based system was applied to the ship initial design to show the handling procedure of the agent system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.613-614
• /
• 2006

Design data, information, and knowledge have complex associations with each other. Systems related with the management of the data, information, and knowledge are various, and the representations are numerous. Therefore it is difficult to construct a knowledge based design system with a full association knowledge for supporting the design tasks. In this research, OWL based ontology model for an excavator design is developed for the representation of the relationships. Also an ontology model is used to develop the knowledge based excavator design system.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.363-368
• /
• 2022

For taller buildings with unconventional architecture, refined structural systems or in geographical areas with high wind conditions, performance-based design can be seen as an enhanced design process and is either a supplement to, or alternative to a prescriptive code-based design. The ultimate goal of Performance-Based Wind Design (PBWD) is to result in a building that better addresses key goals of performance over the buildings full life cycle. Major innovations around the use of a PBWD approach include nonlinear dynamic analysis for wind design, limited inelasticity in the main wind force resisting system elements, and system-based performance criteria. This paper discusses potential considerations and benefits made when using a performance-based approach, in addition to the general practicality of use, for the structural design on a few key tall buildings.

• Educational Technology International
• /
• v.10 no.2
• /
• pp.29-61
• /
• 2009

The purpose of this study was to design an inquiry supporting tool on wiki based collaborative learning and to investigate the effect of the inquiry supporting tool. Eight design principles were selected and more specified design strategies were made from the literatures. The first system with the first-round design principles was developed and implemented in an actual classroom. After the first field study, researcher found a few drawbacks of the system. The second system was implemented in the classroom again. Finally developed wiki-based inquiry supporting tool system is unique in that it allows instructors to design their own CSCL inquiry activities, and it has intuitive menu tabs showing inquiry learning processes.

• Educational Technology International
• /
• v.16 no.2
• /
• pp.249-272
• /
• 2015

This study is a theoretical exploration of project-based service-learning and its application in designing pre-dental curricula. As a response to the limitation of community service courses, service-learning has been implemented as pedagogy in higher education practices. Service-learning connects service and learning by engaging students in activities that address community needs with intentionally designed learning opportunities while adding value to and transforming both service and learning. Project-based service-learning is an extended and more active version of service-learning. Whereas service activities are arranged by instructors in the original service-learning, project-based service-learning provides students with opportunities for exploring problems and root causes on site and then devising and implementing solutions of their own using their talents and creativity. This study proposes a theoretical approach to project-based service-learning and suggests six design components, namely, related curriculum, reflection, reciprocity, service and community engagement, evaluation and recognition, and creative problem solving. Based on the components, 20 design strategies are formulated. The exploration is aimed to provide design guides for professionals attempting to implement project-based service-learning in higher education.

• Natural Product Sciences
• /
• v.19 no.2
• /
• pp.150-154
• /
• 2013

A new oleanane-type triterpenoid saponin together with six known saponins were isolated from the roots of Pulsatilla cernua. Their structures were elucidated on the basis of spectroscopic data, including 2D NMR spectra and chemical evidence. Compounds 1 and 6 are reported from this genus for the first time.