• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.309-316
• /
• 2004

This experiment was carried out to assess the growth and development of five rye(Secale cereale L.) cultivars based on the Feekes scale in relation to sowing date at the Experimental Livestock Farm, Seoul National University(SNU), Suwon from 30 September 2001 to 4 May 2002. The experiment was conducted in split plot design with three replications. The main plots consisted of two sowing date such as early(30 September) and late(15 October). The subplots consisted of rye cultivars of five different maturity groups such as 'Kodiak', 'Koolgrazer', 'Danko', 'Homil22' and 'Olhomil'. The plant height of early sowing rye cultivars was higher than that of late one. Among the rye cultivars tested, plant heights of early maturing cultivars were higher than those of the other cultivars. The tiller number at early sowing(48.0) was higher than that of late(24.3), however, late maturing cultivars were higher than those of the other cultivars among the rye cultivars tested. Growth and development in the early sowing were generally three days earlier than those of late sowing cultivars. Growth and development in 'Olhomil' rye cultivars was earlier than 'Danko' rye cultivars when sown in early, but 'Olhomil' and 'Koolgrazer' rye cultivars showed an early maturity than 'Danko' rye when sown in late. Therefore, the developmental stages of winter rye cultivars could be categorised the following maturity; 'Olhomil' and 'Koolgrazer' are early in maturity, 'Homil22' is medium, and 'Kodiak' and 'Danko' are late in maturity.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2015

Recently, BIM proliferates at high speeds so that BIM planning is trying to be used in various kinds of engineering. However, when using different software during design phase and construction phase, the problem of mutual compatibility is coming out. Even the BIM technology has been used or the practical applicability has been made into result, it would be fair to say that BIM has limitations in the visual level. In this research, it is meaningless to obtain the BIM result as the primary purpose. As the usefulness of it is judged incomplete, we committed to master the trend and problems of terrain spatial information systems and BIM. Furthermore, the plan of building the BIM in the civil field, especially the civil-BIM based on the technology ofterrain spatial information has been presented. It can be judged through this research that the high-capacity DB of BIM occurred during the whole process may cause poor performance of the following stage the structure system which connects the terrain spatial information and civil-BIM. In order to manage the optimal full cycle, the spatial analysis technology of the stages after choosing the DB has been described.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.191-199
• /
• 2019

Road development is considered an important factor in invasion and dispersion of ailen plants by damaging the natural ecosystems and connecting the detached landscapes into long tubular structures. In this study, vegetation survey was carried out according to the topographical characteristics of cut slope, fill slope, and flat land at the construction site in order to understand the effect of road developemt on the change of the floristic composition of ailen plants. Road developement projects caused a lot of changes in annual and biennial alien plants because of continuous disturbances. Changes in species composition of alien plants decreased in the cut slope. On the other hand, the ailen palnts of the fill slope increased. The increase or decrease alien plants on flat land were identified depending on where it occurred, and no major trend was found. The cause of these change was driven by unintentionally introduced alien plants. In particular, the cut slope with a high occurence of unintentional ailen plants should not be used as a source of high-risk alien plants such as ecosystem disturbances. Since the transplanted species were intentionally planted by the landscape plan, it was possible to identify colonies from early stages and spread to the nearby flat land. Therefore, in order to minimize the impact of road slope vegetation on the surrounding ecosystem during and after road construction, it is suggested to plant high viability plants in the landscape design during the environmental impact assessment consultation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.70-77
• /
• 2010

Microcement grouting and micro pile are frequently used for ground modification during tunnel construction. The influence of grouting pressure of microcement grouting and micro pile to the existing bridge which is directly over the constructing tunnel is investigated. Three dimensional seepage flow-structure interactive analysis considering firm water pressure with full stages of construction including the construction of upper bridge, microcement grouting, micro pile and tunnel is performed. The settlement and tilting of the pier of existing bridge violate the design code and the reaction of the bridge are highly increased after grouting. The stress of tunnel bracings such as rockbolt and shotcrete also exceed the limit of the code. The pressure of microcement grouting is confined by bedrock and transmit to the surrounded soil and the upper bridge. Microcement grouting needs mid-high pressure to penetrate through weak fault plane and the pressure greatly influence the safety of the upper structure. It is important to decide and care the grouting pressure to improve weak fault plane directly under the existing structures and the pressure of microcement grouting should be considered in underground analysis.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.8
• /
• pp.21-29
• /
• 2012

At-rest lateral stress coefficient that is used for the evaluation of geotechnical structures such as foundations and retaining walls plays a significant role in the analysis and design, as a state variable of in-situ stress condition. In the widely applied Jaky's Ko equation stress condition can be inferred from the internal friction angle obtainable from the laboratory experimentation whereas the eguation mares it challenging to evaluate the influences and criteria of particle characteristics which is essential for the application of friction angles in practices. Thus, this study experimentally explored the behaviors of Ko depending on the relative density, particle shape, and surface roughness effect during a range of loading stages. The Ko values of Jumumjin sand, glass beads, and etched glass beads were measured using a customized Ko device housing strain gauges during loading-unloading-reloading steps, and the effect of dominant factors on Ko is analyzed. Results show that the high Ko prevails for both round and angular specimens with low relative density and the surface roughness has a nominal effect. The angular particles exhibit low Ko for specimens with similar relative density. The characteristics of relevance between Ko and friction angles with varying relative density are also investigated based on the experimental results using empirical correlations and previously reported values.

• Child Health Nursing Research
• /
• v.20 no.2
• /
• pp.96-104
• /
• 2014

Purpose: Nurse educators can use film effectively to promote nursing students' motivation and indirect experiences. The purpose of this study was to develop a teaching-learning design using films based on Kolb's experiential learning model for understanding of child growth and development, and to evaluate students' satisfaction with cinenurducation according to learning type and content. Methods: Participants were seventy-four first year nursing students in the spring semester of 2013 at a private university located in Busan. In each class, participants watched film, participated in peer-to-group discussion and an educator's lecture, and wrote a composition based on Kolb's four learning stages. After class, participants filled out a questionnaire developed by the researchers. Results: Results showed a high satisfaction with cinenurducation regardless of learning type and content concerning child growth and development. Advantages of cinenurducation included it being "fun and interesting," "helpful to understand the characteristics of children," and "develop critical thinking through discussions." Disadvantages included "length of time needed," and "burdensome." Conclusion: Films are advantageous in that they provide indirect experience for nursing students. Selection of appropriate films and evaluation of learning goal achievements are important to maximize the effectiveness of cinenurducation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.408-420
• /
• 2010

On a Mobile Ad hoc NETwork(MANET), it is difficult to detect and prevent misbehaviors nodes existing between end nodes, as communication between remote nodes is made through multiple hop routes due to lack of a fixed networked structure. Therefore, to maintain MANET's performance and security, a technique to identify misbehaving middle nodes and nodes that are compromise by such nodes is required. However, previously proposed techniques assumed that nodes comprising MANET are in a friendly and cooperative relationship, and suggested only methods to identify misbehaving nodes. When these methods are applied to a larger-scale MANET, large overhead is induced. As such, this paper suggests a system model called Secure Cluster-based MANET(SecCBM) to provide secure communication between components aperANET and to ensure eed. As such, this pand managems suapemisbehavior nodes. SecCBM consists apetwo stages. The first is the preventis pstage, whereemisbehavior nodes are identified when rANET is comprised by using a cluster-based hierarchical control structure through dynamic authentication. The second is the post-preventis pstage, whereemisbehavior nodes created during the course apecommunication amongst nodes comprising the network are dh, thed by using FC and MN tables. Through this, MANET's communication safety and efficiency were improved and the proposed method was confirmed to be suitable for MANET through simulation performance evaluation.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.698-705
• /
• 2017

Environmental impact of a mobile phone charger containing recycled plastic was quantified using LCA and the environmental benefits from the use of recycled and virgin plastic were compared. The assessment considers potential environmental impacts across the whole life cycle of the charger including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages and quantified six environmental impact categories; Abiotic depletion; Acidification; Eutrophication; Global warming; Ozone layer depletion; and Photochemical oxidants creation. The study showed that the environmental impacts of the use stage accounted for 94.4% and 70% in the resource depletion and global warming impact categories, respectively, and the environmental impacts of the pre - manufacturing stage accounted for more than 98% in the other impact categories. The main cause of the environmental impacts in the use stage was electricity consumed by the charger. The main cause in the pre-manufacturing stage was PBA (Printed Board Assembly) and external case manufacturing. In order to quantify the environmental benefits of recycled PC (Polycarbonate) in the exterior case, the environmental impacts of 1 kg production of recycled PC and virgin PC were evaluated. The environmental impact on the abiotic depletion of the recycled PC is estimated to be 30% compared to the virgin PC, and the impacts on the other impact categories of the recycled PC were less than 5% of the virgin plastic. Sensitivity analysis was performed for 12 items including site data and assumptions made. The sensitivity of each item was less than 10%. The results of this study confirm that designing compact and light PBA, improving charging efficiency, and use of recycled plastic are important design factors to reduce the environmental impact of a charger.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.24-38
• /
• 2017

The awareness and demand for technological elements in the field of cloud computing and their application models have increased. Cloud-based service information systems are being expanded for use in many applications. Advancements in information technology are directly related to spatial information. PaaS is an important platform for implementing a substantial cloud ecosystem to develop geo-based application services. For this reason, it is necessary to analyze the PaaS cloud technology prior to the development of SaaS. The PaaS cloud supports sharing of related extensions, database operations and management, and application development and deployment. The development of geo-spatial information systems or services based on PaaS in ranging the domestic and overseas range is in the initial stages of both research and application. In this study, state-of-the-art cloud computing is reviewed and a conceptual design for geo-based applications is presented. The proposed model is based on container methods, which are the core elements of PaaS cloud technology based on open source. It is thought that these technologies contribute to the applicability and scalability of the geo-spatial information industry that addresses cloud computing. It is expected that the results of this study will provide a technological base for practical service implementation and experimentation for geo-based applications.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.149-169
• /
• 2009

Integrated Pollution Prevention and Control(IPPC) has become an idealistic environmental prevention concept in developed countries and corresponds with principles of Industrial Ecology. The concept of emissions regulatory integration is a key factor for an integrated environmental management system. While most EU member countries have a cross-media regulatory system, Korea has a media-specific regulatory system which was found to have significant environmental management problems. The purpose of this study is to integrate the emissions regulatory system by resolving difficulties through procedural, organizational, and substantive analysis of integration. To this end, the following research was performed: The first task was to determine the target of the integrated emissions regulatory system. In connection with this, the "IPPC directive" of the EU and the "PPCA 2000" schedule 1 of the UK, as well as environmental laws in Korea were compared and analyzed. The second was to design a regulatory system model. This model was divided into three groups after considerations were made regarding the time it would take for the pre-application,application, and permission stages. Lastly, on the basis of this research, a revised bill for an integrated emissions regulatory system was suggested. Nevertheless, substantive analysis of integration focused on BAT requires supplementation in order to make the integrated emissions regulation system operate normally as an environmental management policy and regulation method. To this end, the specific characteristics of Korean society, culture, and law should be actively considered.