• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.62-67
• /
• 2007

It was investigated to develop the technology for simultaneous removal of $SO_2/NO$ in flue gas using liquid homogeneous catalyst. Test was carried out using a bench scale and a pilot scale experiment. The investigation led to the following results: 1) Removal efficiency of $SO_2$ gas showed good results regardless of operating condition. Removal efficiency of NO gas, however, proportionally increased with higher packing height, lower concentration and larger injection rate of catalyst 2) The optimum design parameters for simultaneous removal of $SO_2/NO$ gas using Fe(II)-EDTA catalyst were as follow: HTU(height of transfer unit) = 0.5 m, liquid gas ratio = 20 $L/m^3$, NTU (number of transfer unit) = 3 stages, cross dimension of scrubber=0.025 $m^2$ 3) The removal efficiencies of $SO_2$ and NO were 95% and 81%, repletely. 4) The high HTU is advantageous on removal of the NO, but the excessive HTU diminishes operating efficiency. Consequently, it is important to decide the HTU of optimum.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.53-69
• /
• 2019

Purpose - National scientific technology R&D investment is exceeding 60 trillion won per year, and the results of patent applications and technology transfers are visually improving. However, despite the improving research results of national R&D, the practical results of technology startups are mediocre. It is now time to expand the construction of the technology commercialization ecosystem, where the expansion of national R&D leads to the results of technology startups. Therefore, this study discussed the measures to increase the competitiveness of technology startups through the factual survey of the companies that benefitted from R&D support programs. Research design, data, and methodology - This study targeted 996 companies that benefitted from the R&D projects of the Technology Transfer Center for National R&D Programs, and deducted itemized issues through the survey replies. Survey questions were prepared to estimate the national R&D results, and the technology recognition path, the purpose of detailed introduction of the technology, investment of the commercialization fund, economic results, and the factors of success and failure were analyzed. Results - As for the recognition rate of technology during the process of corporate technology commercialization through the technology transfer, recognition through project participation showed a high response rate, and diverse implications of technology commercialization were deducted through the analysis of economic results. As for the resolution alternatives, the proliferation of technology commercialization platform that can create excellent technology for the companies in early stages and the measure of expanding the distribution of technology infrastructure were suggested. In this study, public technology commercialization strategy is established, and the innovative marketing strategy is presented. Conclusions - This study reveal that the result of creating scientific technology jobs should be deducted, in order to produce the revolutionary results of job creation by suggesting the success models of technology commercialization based on domestic scientific technology. In particular, even though the support systems for public research results are being diversely suggested, accurate studies on their actual conditions are currently lacking. Therefore, this study suggest realistic political alternatives to assure results in the process of public technology commercialization, by examining the current state of public research results of R&D support institutions and diagnosing the issues.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.186-199
• /
• 2016

The shoe last which is the framework for the shoemaking is intensively combined with the 3D data and technologies. International shoe companies have already commercialized 3D printing technology in producing the shoe, but domestic shoe companies are still in their early stages. This study used the 3D scanning, 3D modeling and 3D printing of the high-technology to make the shoe last. This 3D producing processes should be helpful in building competitiveness in domestic shoe industry. The 3D foot scanning data of men in 30s(n=200) were collected in SizeKorea(2010). The basic statistics, factor and cluster analysis were performed. They were categorized in 3 groups by 3D foot measurement data, and the standard models were selected in each group. The cross sections in XY, YZ and XZ planes sliced from 3D scan data of the standard model were used in the sketches of the 3D shoe last modeling. The 3D shoe last was modeled by Solidworks CAD and printed by MakerBot Replicator2; a desktop 3D printer. This research showed the potential for utilization of 3D printing technology in the domestic shoe industry. The 3D producing process; 3D scanning, 3D modeling and 3D printing is expected to utilized widely in the fashion industry within the nearest future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.150-166
• /
• 2020

Based on the theory of cognitive reserve, we undertook this study to develop a cognitive function training program for woman in menopausal transition with complaints of declining in cognitive function. The program was established by applying the analysis, design, and development stages of the network-based instructional system designed by Jung. The cognitive function training program developed by us is an was an 8-week program composed of cognitive and video training using a mobile application. The program consists of 24 sessions, each with 20-30 minutes of duration, to be completed 3 sessions per week. The contents of the cognitive function training comprise of memory, attention, language function, and scenario-based problem-solving for executive functions, all of which are cognitive areas found to be the most vulnerable for menopausal women. The educational contents were developed for eight subject areas, one subject area per week, including the definition of menopause, its causes and symptoms, menopause and brain function, etc. During the pilot test, the cognitive function training program was applied to 10 menopausal women who complained of cognitive function decline. The results indicated that, after eight weeks of training, the overall cognitive function of participants increased, revealing statistically significant differences (t=-3.04, p=.014) after the program was completed. The mobile app-based cognitive function training program might not only improve patients' memory functions but also potentially reduce the incidence of dementia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.316-326
• /
• 2016

The purpose of this research was to develop a self-care application for kidney transplantation patients based on a review of previous literatures and the results of a survey that evaluated the needs of patients. The research proceeded in ADDIE order of analysis, design, development, implementation, and evaluation stages. In the analysis phase, interviews were conducted on over 5 kidney transplantation patients. Moreover, related applications and literatures were reviewed to develop application contents. App-based postoperative self-care program composed of the following: Health teaching, measurement, checklist, views, alarms, and App information. For the evaluation phase, a survey was conducted on 9 experts and 5 patients, using a smartphone application. SPSS/WIN 21.0 program was used for data analysis. Descriptive statistics were used to analyze the validity and suitability of data obtained from experts and users. Content was validated using CVI. Expert assessment of application for the self-care after kidney transplant showed 3.5 out of 4. Patient assessment showed 3.7 out of 4. We determined that a self-care application for patients that underwent kidney transplant is helpful. Moreover, a future study is necessary to test and verify the effects of using this application on self-care and self-care knowledge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.355-362
• /
• 2016

The pipe material is selected according to the physical and chemical properties of the fluid flowing within it. Because the fluid used in fire extinguish systems is water, the various foreign substances dissolved in it cause scale to form on the pipe wall and accelerate the corrosion and aging of the pipe itself. This results in an increase in the friction loss and eventually degrades the efficiency of the pump. The use of CPVC (Chlorinated Poly-Vinyl Chloride) pipes was confirmed to reduce the friction loss compared to conventional steel pipes in the design and construction stages. The friction loss was found to be 76.64MPa with a C-value of 120 for the steel pipe and 50.72 MPa with a C-value of 150 for the CPVC pipe in an actual apartment construction environment. It was confirmed that the friction loss was improved by about 34% when using the CPVC pipe. When the steel and CPVC pipes were employed in the construction, the construction costs were 1,585,158 and 931,842 won, respectively. Therefore, it was shown that the construction cost was reduced by about 41%. We investigated the safety of the fire extinguishing system and the improvement in the economic performance due to the reduction in the total installed capacity by studying practical applications in the field.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.761-776
• /
• 2003

Numerical models were employed to investigate the hydrodynamics of water flow in the lake behind a dam and the spillway where supercritical flows and negative pressures are likely to occur. In this study, 2-D model, RMA2 was employed to examine the upstream flow pattern and 3-D CFD model, FLUENT was used to evaluate the three-dimensional flow in the approaching region and flow distributions in the spillways and discharge culverts. The bathymetry and the details of structures were carefully taken into consideration in building the models. The results from applying the 2-D model for the planned Hantan River Dam show that large eddies, the velocity of which reaches up to 1 m/s are occurring in several places upstream of the dam. That means that the 2-D numerical model could be utilized to investigate the two-dimensional flow patterns after the construction of a dam. Three-dimensional numerical results show that the approach flow varies depending on stages and discharge conditions, and velocities at spillways, discharge culverts, and sediment flushing tunnels are differently distributed. The velocity distributions obtained from the numerical model and a hydraulic model at the centerline of spillways 100 m upstream of the dam show reasonably similar results. It is expected that 2-D and 3-D numerical models ate useful tools to help optimize the dam design through investigating the flow patterns in the spillway and at the upstream of the dam, which is not always feasible in hydraulic modeling.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.207-218
• /
• 2015

This study is to design and implement Smartphone application by applying the principles and processes of narrative therapy for the participants. The application is able for participants to fight out of the difficulty in question centered on the issue, and to be able to find a positive new stories to be evolving the story of their lives as well. Therefore, using the application will help them to live a healthier life out of the problems. As a way of currying the wounded heart of the youth, narrative therapy techniques were applied to Smartphone appliances accustomed to the youth. The youths' wounded minds will not only be easily cured but also can be a important factor in determining the direction of life. In this study, narrative flow was structured into four stages; relationships, externalization, creating new stories and strengthening the new story bsed on Doll & Doll' theory. Based on them, the Smartphone application for curing the wounded heart was designed and developed by utilizing narrative therapy techniques. The application was tested by 30 University students in Jeonbuk province in Korea and the results showed that they were satisfied with the application with relation to improving their heart health.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.51-59
• /
• 2014

Shallow landslides and debris flows are a common form of soil slope instability in South Korea. These events may be generally initiated as a result of intense rainfall or lengthening rainfall duration because of the effects of climate change. This paper presents the evaluation of rainfall-induced natural soil slope stability and reinforced soil slope instability under vertical load (railway or highway load) throughout South Korea based on quantitative analysis obtained from 58 sites rainfall observatories for 38 years. The slope stability was performed for infinite and geogrid-reinforced soil slopes by taking an average of maximum rainfall every ten years from 1973 to 2010. Seepage analysis is carried out on unsaturated soil slope using the maximum rainfall at each site, and then the factor of safety was calculated by coupled analysis using saturated and unsaturated strength parameters. The contour map of South Korea shows four stages in 10-year-time for the degree of landslide hazard. The safety factor map based on long term observational data will help prevent rainfall-induced soil slope instability for appropriate design of geotechnical structures regarding disaster protection.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.1
• /
• pp.50-60
• /
• 2020

Estimates of project costs in the early stages of a construction project have a significant impact on the operator's decision-making in important matters, such as the site's decision or the construction period. However, it is difficult to carry out the initial stage with confidence because information such as design books and specifications is not available. In previous studies, case-based reasoning was used to predict initial construction costs, and genetic algorithms were used to calculate the weight of the inquiry phase among them. However, some say that it is difficult to perform better than the current year because existing genetic algorithms are calculated in random numbers. To overcome these limitations, correlation numbers using correlation analysis rather than random numbers are reflected in the genetic algorithm by method of local search, and weights are calculated using a hybrid genetic algorithm that combines local search and genetic algorithms. A case-based reasoning model was developed using the weights calculated and validated with the data. As a result, it was found that the hybrid GA-CBR applied with local search performed better than the existing GA-CBR.