• Journal of Sericultural and Entomological Science
• /
• v.22 no.2
• /
• pp.1-7
• /
• 1981

Diallel crosses among six silkworm varieties were used as the materials by the randomized block design. and combining ability tests were conducted to determine the relationships between parents and their F$_1$ hybrids. The six parents and their 30 F$_1$ crosses were evaluated for five quantitative characters in each female and male silkworms. Mean values of period(days) of larval stage in mid-parent were more than those of each F$_1$ hybrids. Highly significant differences were shown in the total cocoon weight and weight of cocoon layer of silkworms in F$_1$ hybrids of 111$\times$114, 111$\times$ yunil, 114$\times$yunil and those of reciprocal crosses. From the results, it was recognized that varieties A(111), D(114) and F(yunil) were useful varieties as the parents in breeding of silkworms for increasing the total cocoon weight and weight of cocoon layer, etc. Differences among crosses in apparent degree of heterosis existed for total cocoon weight of cocoon layer and cocoon layer ratio, etc. Mean square values of GCA (general combining ability) were more greater than those of SCA(specific combining ability) for period(days) of larval stage, period (days) of 5th instar and cocoon layer ratio of silkworms. The effects of GCA were differ from parents and characters and the effects of SCA were also differ from parents, characters and crosses.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.281-289
• /
• 2010

We determined the optimum ethanolic conditions for extraction of $\gamma$-oryzanol and other functional components from rice bran, using response surface methodology (RSM). A central composite design was used to investigate the effects of the independent variables of solvent ratio ($X_1$), extraction temperature ($X_2$), and extraction time ($X_3$), on dependent variables including yield ($Y_1$), total phenolic content ($Y_2$), electron-donating activity ($Y_3$), ferulic acid level ($Y_4$), and $\gamma$-oryzanol concentration ($Y_5$). Solvent ratio and extraction temperature were the most important factors in extraction. The maximum yield was at 22.56 mL/g ($X_1$), 78.19C ($X_2$), and 522.15 min ($X_3$), at the saddle point. Total phenolic levels were little affected by solvent ratio or extraction temperature. The maximum concentration of extracted total phenolics was 90.78mg GAE/100 g at 21.26 mL/g, $94.65^{\circ}C$, and 567.97 min. A maximum electron-donating ability of 54.72% was obtained with the parameters 20.20 mL/g,$81.89^{\circ}C$, and 701.87 min, at the highest point. The maximum level of ferulic acid components was 210.47 mg/100g at 5.22 mL/g, $79.66^{\circ}C$, and 575.24 min. In addition, the maximum $\gamma$-oryzanol concentration was 660.39 mg/100g at 5.10 mL/g, $81.83^{\circ}C$, and 587.39 min. The optimum extraction conditions were a solvent ratio of 10.45 mL/g, $80^{\circ}C$ extraction temperature, and 535 min extraction time. Predicted extraction levels under optimized conditions were in line with experimental values.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.127-135
• /
• 1978

For improvement and new design of tillage equipments, indoor test is very useful and more desirable than outdoor because the experiment of outdoor is very difficult and its cost is expensive. This study was carried out to determine the physical properties of artificial soil suitable for the indoor test with the soil bin manufactured at the workshop of the Dept. of Agricultural Machinery Engineering. The artificial soil being studied was made with very similarity to the natural soil of the experimental plots of Chungnam National University, and it consist of 39.35 percent, by weight of bentonite and 48.10 percent of sand with 12.55 percent of SAE 10W oil. The results are summarized as follows: 1. Bulk density increased with increasing number of rolling, and its relationship could be expressed. $y=1.073200+0.070780x-0.002263x^2$ where, y=bulk density ($g/cm^3$), x=number of rolling. These results could be explained that the effect of rolling velocity on the bulk density was not singnificant in the range of 4.5~10.4 em/sec. 2. The absolute soil hardness depended directly upon number of rolling, and their relationship could be expressed by the equation. $y=37.74(0.64 +0.17x-0.0054x^2)/(3.36-0.17x-0.0054x^2)^3$. where, y=absolute soil hardness($kg/cm^3$), x=number of rolling. 3. Relationship between the bulk density and absolute soil hardness could be expressed by the equation; $y=37.74(2.46x-2.02)/(6.02-2.46x)^3$. where, y=absolute soil hardness, x=bulk density. 4. The cohesion and the angle of internal friction of artificial soil were increased with increasing its bulk density. According to the cohesion and angle of internal friction, at the range of 1.60~1.75 ($g/cm^3$) of bulk density, this artificial soil was similar with sandy loam of 29.5% moisture content of natural soil. 5. Sliding-fricfion coefficient of steel plate on the artificial soil was 0.3~0.4 and rubber plate on it is 0.64~0.72. Those values were very similar with those of natural soil being studies by many others.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.90-96
• /
• 1981

To design more efficient agricultural machinery, the accurately measuring system among many other factors is essential. A light-beam oscillographic recorder is generally used in measuring dynamic strain but it is not compatible with the extremely high speed measuring system such as 1,000 m/s, also is susceptable to damage due to vibration while using the system in field. The recorder used light sensitive paper for strip chart recording. The reading and analysis of data from the strip charts is very cumbersome, errorneous and time consuming. A microcomputer was interfaced with A/D converter, microcomputer program was developed for measuring, system calibration was done and the strain generated from a cantilever beam vibrator was measured. The results are summarized as follows. 1. Microcomputer program was developed to perform strain measuring of agricultural machine elements and could be controled freely the measuring intervals, no. of channels and no. of data. The maximum measuring speed was $62{\mu}s$. 2. Calibration the system was performed with triangle wave generated from a function generator and checked by an oscilloscope. The sampled data were processed using HP 3000 minicomputer of Chungnam National University computer center the graphical results were triangle same as input wave and so the system have been out of phase distorsion and amplitude distorsion. 3. The strain generated from a cantilever beam vibrator which has free vibration period of 0.019 second were measured by the system controlled to have l.0 ms of time interval and its computer output showing vibration curve which is well filted to theoretical value. 4. Using microcomputer on measuring the strain of agricultural machine elements could not only save analyzing time and recording papers but also get excellent adaptation to field experiment, especially in measurement requiring high speed and good precision.

• Asian Journal of Turfgrass Science
• /
• v.18 no.2
• /
• pp.63-70
• /
• 2004

This study was conducted to figure out the effect of 'Methlyen Urea(MU)', slow released fertilizer and 'T-Vigor', microbial fertilizer as environment fertilizer on growth of 'Crenshaw' creeping bentgrass for environmental management in golf course. This study was conducted at No. 3, 4, 5 Valley Courses of Rexfield Country Club from April to July in 2004. MU, T-Vigor, sterilized T-Vigor were applied five times with 5g and 7.5ml per square meter, respectively. Polt size was 1 square meter and there were three replications with Completely Randomize Design. Collecting data were turf density$(No.\;of\;shoot\;/cm^2)$, chlorophyll $amount(\%)$, root length(cm), dry weight of clipping(g), and dry weight of root(g). The results are as follows; All of turf density, chlorophyll amount and dry weight(g) of MU and T-Vigor were better than control and sterilized T-Vigor. Especially root length of MU and T-Vigor was superior to control and sterilized T-Vigor, even if temperature and humidity was high. In conclusion, MU and T-Vigor might be used as slow release fertilizer for environmental green management in golf course.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.74-82
• /
• 1979

Pinus densiflora S. et Z. which has the widest distribution and highest stock at present in Korea and has used as materials for fuel, house construction, furniture and many other purposes for several hundred years, is considered as one of major species of economic importance, although there are a few epidemic insect injuries and silvicultural difficulties in regeneration. However, since disorderly cutting has been conducted for long time, the valuable local stands have disappeared. Therefore immediate attempts should be taken on the gene conservation and genetic studies including heritabilities and genetic gains of desirable characters. One hundred and twently five plus trees have so far been selected from the nationwide area and kept for the purpose of seed orchard establishment and other theoretical studies. In this study, the wind pollinated seeds of grafted stocks of 13 plus trees in clone bank located in Suweon and the seeds of 4 Japanese plus trees were collected and their progenies were used for heritability study. As indicated in figure 1, thirteen plus trees are from the middle part of Korea and two experimental plantations were laid out in ]972 (1-1 stock) by the randomized block design with five replications, consisting of 10 trees line plots of each family in each replication. Tree height, root collar diameter and branch diameter at 1cm apart from the main stem were measured. The results are summarized as follows 1. The rank of height growth of each plus tree progenies by age was greatly changed under age 3 and it was affected more in poor site than good site. 2. The heritabilities of height growth were estimated to be 7.2% at age 3, negative sign at age 4, 9.4% at age 5, 13.0% at age 6, 8.1% at age 7 and abrupt increase of 63.8% at age 8. The heritabilities were generally increased with increase of age. 3. The heritabilities of root collar diameter and branch diameter (average of the three biggest branches) was 3.2% and 11.8% at age 8 respectively. 4. The genetic gain was largest at age 8 and it was 46.6% when a selection intensity, 1/500 was taken. It, therefore, seems to be reasonable that selection should not be made under age 7.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.13-28
• /
• 2016

This study performed quantitative analysis of isoflavone glycoside contents on Buseoktae, Daewon, Wooram beans and cheonggukjang made of Buseoktae beans from the LC/MS/MS. Also, the experiment carried out by means of RSM(response surface methodology), which included 10 experimental points for the two independent variables addition(40, 55, 70 g) and time(2, 3, 4 min) from the beginning point to boil of cheonggukjang. These were optimized using a Face-centered central composite design. Daidzein contents were $212.16{\mu}g/mL$ in Buseoktae, $212.21{\mu}g/mL$ in daewon, $158.54{\mu}g/mL$ in wooram beans. Genistein contents were $318.84{\mu}g/mL$ in Buseoktae, $310.50{\mu}g/mL$ in daewon, $262.71{\mu}g/mL$ in wooram beans. Total isoflavone contents were $532.50{\mu}g/mL$ in Buseoktae, $524.19{\mu}g/mL$ in Daewon, $422.71{\mu}g/mL$ in Wooram beans. Isoflavone contents of Buseoktae and Daewon were quite similar, relatively contents of Wooram beans were low. Total isoflavone contents of Buseoktae cheonggukjang (for business use) was $430.10{\mu}g/mL$ in A ($32^{\circ}C$, 96 h fermentation), $460.09{\mu}g/mL$ in B ($36{\sim}40^{\circ}C$, 30 h fermentation), $417.46{\mu}g/mL$ in C cheonggukjang($36{\sim}38^{\circ}C$, 72 h fermentation), B cheonggukjang was just a bit more than A, C cheonggukjang. The estimated response surfaces confirmed that the amount and time had significant effects on taste. The optimum condition of Buseoktae cheonggukjang taste was predicted to be 55.20 g addition at 2.92 min.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.239-246
• /
• 1995

This research aimed at the contribution to obtaining the scientifical data which were required for planning she environmentally sound and sustainable management, particularly in the field of the logging road construction. Main natural environmental variables including natural vegetation, rainfall, soil runoff were measured in the logging road on-sites and analysed. This project was carried out at the (mt.)Paekunsan Research sorest of Seoul National University, located in Gwangyang, Chollanam-do in southern part of Korea, from 1993 to 1994. 1. The explanatory variables for erosion and sedimentation on logging road surface were accumulated rainfall, erosion distance, cross-sectional gradient, and soil hardness. The erosion and sedimentation on logging road was increasing positively in proportion to the accumulated rainfall, soil distance from starting point of the logging road, and cross-sectional gradient. 2. On cut-slope of logging road, cut-slope shape, part of the slope, plant coverage, soil hardness, sand content, accumulated rainfall, clay content, and silt content were effective factors. Cut-slope erosion and sedimentation on logging roam increased as with the lower plant coverage, the lower accumulated rainfall, the high sand content in the soil. 3. On fill-slope of logging road, there were three significant variables such as total rainfall and number of rainfall-storm. Fill-slope erosion and sedimentation had a positive correlation with the amount of rainfall, the number of rainfall, the soil hardness. 4. The total erosion and sedimentation on logging road were $5.04{\times}10^{-2}m^2/m^2$ in logging road construction year, $7.37{\times}10^{-2}m^2/m^2$ in next year. The erosion and sedimentation on logging road surface were 32.7% of total erosion and sedimentation on Logging road in construction year, and 57.1% in next year, respectively. The erosion and sedimentation on cut-slopes were 30.4% on logging road in construction year, fill-slopes of total erosion and sedimentation and 21.0% in next year, respectively. The erosion and sedimentation on fill-slopes were 36.9% on logging road in construction year, 21.9 in next year. To decrease the erosion and sedimentation at the logging road from the beginning stage of construction, the effective revegetation works should be implemented on the cut-slope and fill slopes, and erosion control measures such as optima. road design must be constructed on read surface.

• Korean Journal of Poultry Science
• /
• v.17 no.4
• /
• pp.296-302
• /
• 1990

This study was conducted to investigate the interaction of aflatoxin B$_1$($AFB_1$) and vitamin D$_3$($VD_3$) in broiler chicks. The 336 broiler chicks(Hubbard line) of equally mixed sex were allocated to triplicate 8(2$\times$4 factorial) treatment groups. The 0 or 1ppm of AFB$_1$and 0, 500, 1,000 or 1,500IU/kg of VD$_3$ were supplemented to the basal diet Fourteen broilers of equally mixed sex were allocated to each replica and 24 groups were arranged in a randomized block design After 3 weeks of feeding the metatarsus were collected from the right and left legs of 4 chicks (2 for each sex) per group. The bone ash and minerals were measured. 1. In respect to the fresh weight of metatarsus bone no significant difference was found between 0 and 1ppm $AFB_1$ treatments, however, decreasing trend was recognized when fed increasing level of $VD_3$(P＜.01). 2. The ash content in non－fat dry metatarsus bone decreased when fed 1ppm $AFB_1$(P＜.01). However, that increased according to the increasing amount of $VD_3$(P＜.01). Although there was no interaction between $AFB_1$ and $VD_3$ it was shown that the 1500IU/kg of $VD_3$ was neccessary to cover the decrease in ash content of metatarsus. when fed 1ppm of $AFB_1$. 3. The Ca contents in metatarsus were not influenced by feeding $AFB_1$ but an increasing trend was verified by feeding increasing levels of $VD_3$(P＜.05). 4. The P content decreased as $AFB_1$ was fed(P＜.01), while no response was found when fed'different levels of $VD_3$ 5. The Cu content decreased when fed $AFB_1$(P＜.05). 6. The Na, Mg, K, Zn, Fe and Mn contents were not affected by feeding $AFB_1$ and /or $VD_3$.

• Journal of dental hygiene science
• /
• v.14 no.1
• /
• pp.81-86
• /
• 2014

The aim of this study was to take the field manager's opinion about the dental hygiene student's competency. Study design was cross sectional contents analysis with the in-depth interviews. Twelve subjects were randomly selected in half an hour interview. They were signed there's own autograph on the informed consents. The contents of the qualitative interviews were divided into two parts: students' competency required for the field practice and the system of the field practice. The first part consisted of the attitude of the field's practice, how well has accomplished the job, and demanded requirements for the better performance. And the other part was made up of duration of practice, the number of students per institution and other opinion. The results showed that most of them have positive conception about student's competency. They mentioned that many students have 'enthusiastic behavior and attitude in task performance' and 'progressive attitude and mind in duty'. While 'lack of interest in practice and sociality', 'the arrogant demeanor in the fields', and 'passive behavior and attitude in the interpersonal relationship' should be avoided for excellent competency. It is required for dental hygiene students to write daily practice record and clarify their reasons to choose the institution for better performance. In addition, it should be considered to make concrete evaluation items and students and field managers should have mutual responsibility.