• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.82-92
• /
• 2008

Recently, many digital signal processing(DSP) applications such as H.264, CDMA and MP3 are predominant tasks for modern high-performance portable devices. These applications are generally computation-intensive, and therefore, require quite complicated accelerator units to improve performance. Designing such specialized, yet fixed DSP accelerators takes lots of effort. Therefore, DSPs with multiple accelerators often have a very poor time-to-market and an unacceptable area overhead. To avoid such long time-to-market and high-area overhead, dynamically reconfigurable DSP architectures have attracted a lot of attention lately. Dynamically reconfigurable DSPs typically employ a multi-functional DSP accelerator which executes similar, yet different multiple kinds of computations for DSP applications. With this type of dynamically reconfigurable DSP accelerators, the time to market reduces significantly. However, integrating multiple functionalities into a single IP often results in excessive control and area overhead. Therefore, delay and power consumption often turn out to be quite excessive. In this thesis, to reduce power consumption of dynamically reconfigurable IPs, we propose a novel fine-grained clock gating scheme, and to reduce size of dynamically reconfigurable IPs, we propose a compact multiplier-less multiplication unit where shifters and adders carry out constant multiplications.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.65-74
• /
• 2010

The Digital TV(DTV) standard has ushered in a new era in TV broadcasting and raised a great demand for DTV tuners. There are many challenges in designing a DTV tuner, of which the most difficult part is the frequency synthesizer. This paper presents the design of a frequency synthesizer for DTV Tuners in a $0.18{\mu}m$ CMOS process. It satisfies the DTV(ATSC) frequency band(54~806MHz). A scheme is proposed to cover the full band using only one VCO. The VCO has been designed to operate at 1.6~3.6GHz band such that the LO pulling effect is minimized, and reliable broadband characteristics have been achieved by reducing the variations of VCO gain and frequency step. The simulation results show that the designed VCO has gains of 59~94MHz(${\pm}$17.7MHz/V,${\pm}$23%) and frequency steps of 26~42.5MHz(${\pm}$8.25MHz/V,${\pm}$24%), and a very wide tuning range of 76.9%. The designed frequency synthesizer has a phase noise of -106dBc/Hz at 100kHz offset, and the lock time is less than $10{\mu}$sec. It consumes 20~23mA from a 1.8V supply, and the chip size including PADs is 2.0mm${\times}$1.8mm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1477-1486
• /
• 2020

Objective: The objective of this study was to evaluate the effect of different levels of lycopene supplementation on the carcass traits, meat quality, concentration of lipid oxidation products and antioxidant potential in the meat and liver of finishing barrows and gilts. Methods: A total of 40 barrows and 40 gilts were allotted in a completely randomized block design, arranged in a 2×5 factorial scheme, consisting of two sexes (barrows and gilts) and five dietary levels of lycopene (0, 12.5, 25.0, 37.5, and 50.0 mg/kg). In addition, four storage times (0, 24, 48, and 72 h), at 4℃, were added to the model to evaluate the longissimus lumborum muscle. Results: An interaction (p = 0.010) was observed between storage periods and dietary lycopene levels. The unfolding of the interaction (lycopene×period) showed a decreasing concentration of malondialdehyde concentration as the dietary lycopene increased, at all storage periods. No interactions (p>0.050) were observed for the 2,2 diphenyl 1 picrylhydrazyl (DPPH) in the pork. However, the percentage of DPPH radical inhibition reduced (p = 0.001) up to 72 h. Additionally, there was a linear increase (p = 0.001) in the capture of DPPH radicals by antioxidants, as the dietary lycopene increased. No interactions were observed (p>0.05) between the evaluated factors in liver. However, lipid oxidation was reduced by supplementing lycopene in pig diets. The capture of the DPPH radical, resulted increase in the antioxidant power exerted by lycopene in the liver (p = 0.001). The concentrations of the thiobarbituric acid reactive substances and DPPH in the liver were affected by sex (p = 0.001). Conclusion: Dietary supplementation of lycopene reduced the water loss during thawing and was effective in protecting against oxidation of the longissimus lumborum muscle and liver until 72 hours of storage, and the best results were obtained by supplementing with 50.0 mg of lycopene/kg of diet.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.955-967
• /
• 2016

As transportation systems for connecting lands and islands, oversea long-span bridges, underwater tunnels, and immersed tunnels have been mainly used so far. Submerged floating tunnels (SFTs) moored under specific water depth are one of the newest oversea transportation system. Compared to other existing systems, the new system requires relatively less construction cost and time. But, there is still no construction example. For reasonable design of the tunnel and mooring lines the rational structural analysis should be firstly performed. Unlike common transportation structures, the submerged tunnels are mainly affected by the wave, vary irregular excitation component. So, the analysis scheme might be difficult because of the characteristics of the submerged structures. This study aims to suggest the rational global performance analysis methodology for the submerged tunnels. Using ABAQUS the dynamic response of the experimental models studied by KIOST (2013) was investigated considering regular waves. By comparing the simulation results with the experimental results, the feasibility of the numerical simulation was verified. Using the suggested method, the effects of initial inclination of the tethers and draft of the tunnel on the dynamic behavior were studied. In addition, dynamic response of a SFT under the irregular wave was examined.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.6
• /
• pp.772-784
• /
• 2012

Marker-assisted gene pyramiding aims to produce individuals with superior economic traits according to the optimal breeding scheme which involves selecting a series of favorite target alleles after cross of base populations and pyramiding them into a single genotype. Inspired by the science of evolutionary computation, we used the metaphor of hill-climbing to model the dynamic behavior of gene pyramiding. In consideration of the traditional cross program of animals along with the features of animal segregating populations, four types of cross programs and two types of selection strategies for gene pyramiding are performed from a practical perspective. Two population cross for pyramiding two genes (denoted II), three population cascading cross for pyramiding three genes(denoted III), four population symmetry (denoted IIII-S) and cascading cross for pyramiding four genes (denoted IIII-C), and various schemes (denoted cross program-A-E) are designed for each cross program given different levels of initial favorite allele frequencies, base population sizes and trait heritabilities. The process of gene pyramiding breeding for various schemes are simulated and compared based on the population hamming distance, average superior genotype frequencies and average phenotypic values. By simulation, the results show that the larger base population size and the higher the initial favorite allele frequency the higher the efficiency of gene pyramiding. Parents cross order is shown to be the most important factor in a cascading cross, but has no significant influence on the symmetric cross. The results also show that genotypic selection strategy is superior to phenotypic selection in accelerating gene pyramiding. Moreover, the method and corresponding software was used to compare different cross schemes and selection strategies.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.71-78
• /
• 2016

Purpose - This paper is for the Analysis on the Hindrance Factors and Activation Scheme by the Type of Distribution Channel in Direct transaction of Agricultural Products. As the distribution structure of agricultural products has become changable, farmers seem to use the type of direct distribution in order to enhance the receiving price. This study aims to explore the hindrance factors and income variation rate in direct transaction of agricultural produces, specifically focusing on the 167 farmers. Research design, data, and methodology - To ascertain the hindrance factors exactly by the type of distribution channel, the managements were classified by four subcategories, that is high sales percentage with shopping malls, SNS, shopping malls and SNS, and off-line direct transaction. Results - As a result of the hypothesis test, hinderance factors in online direct deal activation were found to be in the order of the difficulty in continuous content production, the difficulty in shopping mall operation and maintenance, and the difficulty in card commission problems, and in the order of the difficulties in continuous content production, the difficulty in continuous content production, the difficulty in shopping mall operation and maintenance, and the difficulty in branding for the SNS group. Thus, it can be seen that the difficulty in continuous content production, shopping mall operation and maintenance were found to be the biggest obstacles. In addition, hindering factors in online direct deal activation were found to be in the order of the difficulty in credit card settlement, the difficulty in publicity, and the difficulty in dealing with unsold goods. The group with high sales rate in shopping mall was found to be increased by 23.9% in the gross income compared to the previous year, the group with high SNS sales ratio increased by 56.5%, the group with direct offline transaction increased by 37.1%, among which the group with the highest increase rate of SNS sales ratio was found to be the highest from the rate of increase/decrease of the income, which was statistically significant. Conclusions - It can be suggested that government and local government may provide agricultural management with supporting plan which in turn can activate direct transaction in any possible ways.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.98-105
• /
• 2018

Objective: This study aimed to assess the effect of pelleted and expanded sorghum-based feeds prepared with different moisture levels and particle size of ingredients on metabolizable energy, ileal digestibility of amino acids and broiler performance. Methods: The experiment was performed with 720 male broiler chicks of the Cobb strain, with treatments of six replications, with 15 birds each; they were arranged in a completely randomized design and $2{\times}2{\times}2$ factorial scheme (pelleted or expanded feed processing, 0.8% or 1.6% moisture addition in the mixer, and particle size of 650 or 850 microns). Results: Higher pellet quality (pellets, % and pellet durability index [PDI]) was obtained in expanded diets and inclusion of 1.6% moisture. The particle size of 850 microns increased the PDI of final diet. All studied treatments had no significant effect on weight gain and broiler carcass and cut yields. Lower feed conversion occurred for birds fed pelleted feed at 42 d. The highest apparent metabolizable energy (AME) and apparent metabolizable energy corrected to zero nitrogen balance (AMEn) values of feed in the initial rearing phase (10 to 13 days) were observed in birds fed pelleted feed or for feed prepared with 1.6% moisture. The highest ileal digestibility coefficients of amino acids were obtained with the consumption of pelleted feed prepared with a particle size of 650 microns and 1.6% moisture. Conclusion: Pelleted feed prepared with a milling particle size of 650 microns and 1.6% moisture provided increased ileal digestibility of amino acids and AMEn in the starter period. However, the expanded feed improved pellet quality and feed conversion of broilers at 42 days of age. We conclude that factors such as moisture, particle size and processing affect the pellet quality, and therefore should be considered when attempting to optimize broiler performance.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.132-144
• /
• 2004

With the rapid development of internet technology, the number of internet users and the amount of multimedia information on the internet is ever increasing. Recently, the web sites, such as e-business sites and shopping mall sites, deal with lots of image information. As a result, it is required to support content- based image retrieval efficiently on such image data. This paper proposes an intelligent image retrieval system, which adopts XML, technology. To support object-based col)tent retrieval on product catalog images containing multiple objects, we describe a multi -level metadata structure which represents the local features, global features, and semantics of image data. To enable semantic-based and content-based retrieval on such image data, we design a XML-Schema for the proposed metadata and show how to represent such metadata using XML- documents. We also describe how to automatically transform the retrieval results into the forms suitable for the various user environments, such as web browser or mobile browser, using XSLT The proposed scheme can be easily implemented on any commercial platforms supporting XML technology. It can be utilized to enable efficient image metadata sharing between systems, and it will contribute in improving the retrieval correctness and the user's satisfaction on content-based e-catalog image retrieval.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.486-495
• /
• 2006

In this paper, a low-power 1Kb synchronous EEPROM is designed with flash cells for passive UHF RFID tag chips. To make a low-power EEPROM, four techniques are newly proposed. Firstly, dual power supply voltages VDD(1.5V) and VDDP(2.5V), are used. Secondly, CKE signal is used to remove switching current due to clocking of synchronous circuits. Thirdly, a low-speed but low-power sensing scheme using clocked inverters is used instead of the conventional current sensing method. Lastly, the low-voltage, VDD for the reference voltage generator is supplied by using the Voltage-up converter in write cycle. An EEPROM is fabricated with the $0.25{\mu}m$ EEPROM process. Simulation results show that power dissipations are $4.25{\mu}W$ in the read cycle and $25{\mu}W$ in the write cycle, respectively. The layout area is $646.3\times657.68{\mu}m^2$.