• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2013

Bio Clean Room(BCR) and pharmaceutical product manufacturing facilities require careful assessment of many factors, including HVAC, controls, room finishes, process equipment, room operations, and utilities. Flow of equipment, personnel, and product must also be considered along with system flexibility, redundancy, and maintenance shutdown strategies. It is important to involve designers, operators, commissioning staff, quality control, maintenance, constructors, validation personnel, and the production representative during the conceptual stage of design. Critical variables for room environment and types of controls vary greatly with the clean space's intended purpose. It is particularly important to determine critical parameters with quality assurance to set limits and safety factors for temperature, humidity, room pressure, and other control requirements. In this paper, oxygen cluster ion equipment was utilized in order to enhance the indoor air quality and to prevent the airborne infection of ward in hospital. Moreover, the performance test of the equipment was also performed in order to develop the optimal sterilization system of BCR using the equipment.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.97-104
• /
• 2009

Ever increasing fuel prices, almost doubled in the last three years, and global pressure to reduce their environmental impact have been enforcing commercial vessel operators and designers to re-assess current vessel designs with emphasis on their propulsion systems and operational practices. In this paper the "Inclined Keel Hull (IKH)" concept, which facilitates to use larger propeller diameter in combination with lower shaft speed rates and hence better transport efficiency, is explored for a modern 3600 TEU container vessel with the aim of fitting an 13 % larger diameter propeller (and hence resulting 20% lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration. It appears that successful application of the "inclined keel Hull" concept is a fine balance amongst the maximum gain in propulsive efficiency, minimum increase in hull resistance and satisfaction of other naval architectural and operational requirements. In order to make the concept economically more viable, this paper concentrates on the fore body design with the possible combination of increase of volume in its fore body to recover the expected volume loss in the aft body due to the space for larger propeller and its low wave-making resistance to minimize the efficiency loss using a well-established optimization software.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.695-705
• /
• 2014

Precast concrete (PC) beam-column connections using ductile rods are proposed for earthquake zone. An existing beam-column connection, two PC specimens designed by considering failure modes and a conventional RC specimen were tested under cyclic loading to evaluate the seismic performance. The specimens were designed to satisfy the requirements of current design code. The variables are the yield strength of longitudinal reinforcing bars of PC beams. The test results showed that the proposed system applying smaller yield strength of the longitudinal reinforcing bars at the PC beams than the ductile rods was satisfied with seismic criteria. The deformation capacity and energy dissipation capacity of the proposed PC beam-column connections were greater than those of the existing DDC system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.192-201
• /
• 2005

DiffServ supports aggregated traffic classes to provide various QoS to different classes of traffics. However, current DiffServ specifications do not have a complete QoS management framework. It is possible to lead to serious QoS violations without a QoS management support. From this reasoning, a QoS management system that can manage differentiated QoS provisioning is required. This paper proposes and implements a policy-based QoS management platform for differentiated services networks, which specifies QoS policies to guarantee dynamic QoS requirements. The implementation of the proposed platform is built on W framework and uses XML to represent and validate high-level QoS policies. High-level QoS policies are represented as valid XML documents and are mapped into Em beans of the EJB-based policy server of the platform. The policy distribution and the QoS monitoring are processed using SNMP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.362-370
• /
• 2011

The current healthcare information systems field demand for healthcare construction and operation of various systems. Therefore, the budget is constantly increasing for information systems. But the current system have been lack of data that provide real-time issues. Because standardization and real-time networks are not configured. In this paper, proposed web services-based integration of information systems about healthcare sector. Web Services as the primary means to pursue integration SOA(Service Oriented Architecture). SOA could add new requirements without significantly altering the existing system. And SOA is an important model that can quickly adapt to the environment in healthcare field of changing rapidly. In this paper, the healthcare sector based on SOA design and implement an integrated information system. The integrated information system is proving to be a suitable model based on web service platform for healthcare data and service integration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.10
• /
• pp.1020-1027
• /
• 2014

ISO 26262 is applied to vehicle and electrical/electronic component manufacturers for minimizing car accidents and life damage by the extended use of electronic control equipments and their malfunctions. In this standard, safety requirements are required to be applied from the early stage of development upto manufacture and disposal stages throughout the total lifecycle of the full vehicular system, and electromagnetic compatibility must be also managed as an important consideration factor. Therefore, it is nowadays very necessary to research and develop EFS(EMC for Functional Safety) to be applied in each stage of the design, manufacture, accreditation, use, maintenance stages of cars. In this paper, how EFS can be applied for the application of ISO 26262 is described. By the enforcement of this suggestions into the legal requirement or New Car Assessment Program(NCAP) test items, it is necessary that car manufacturer have to perform some procedures for ensuring car safety by themselves.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.2
• /
• pp.19-23
• /
• 2014

In the capital of Mongolia where the air quality is getting worse due to the coal consumption used for electricity generation and district heating, the application of geothermal systems in the housing sector is recently designed for high class resort. In this study, the case of applying a geothermal system in a house in Mongolia is examined. The effects of passive house design on the needed heat pump capacity, as well as the annual energy consumption are analyzed. Moreover, as the initial costs, except labor fee, are assumed similar to Korea, cost analysis for several cases is examined, too. From the results, if a house is designed according to passive house standard instead of ASHRAE standard, the heat pump capacity can be expected to be reduced from 16 to 5~6 RT. Furthermore, although the initial cost of architectural cost might increased by 29 M\, the total initial cost is reduced by 14 M\, while the annual energy consumption is reduced by 14%. This is mainly driven by the fact that the geothermal system which serves as the main system to cover the building needs, with a high initial cost for fulfilling the peak requirements.

• Industrial Engineering and Management Systems
• /
• v.11 no.3
• /
• pp.233-240
• /
• 2012

The implementation of business process management (BPM) systems in large number of business organizations transforms BPM system into such a level of maturity and tends to collect large repositories of business process (BP) models. This issue encourages BP flexibility that leads to a large number of process variants derived from the same model, but differing in structure, to be stored in the large repositories of BP models. Therefore, the repositories may include thousands of activities and related business objects with variation of requirements and quality of service. It is a common practice to customize processes from reference processes or templates in order to reduce the time and effort required to design and deploy processes on all levels. In order to address redundancy and underutilization problems, a generic process model, called as reference BP, is absolutely necessary to cover the best of process variants. This study aims to develop multiple-objective business process genetic algorithm (MOBPGA) to find a set of non-dominated (Pareto) solutions of business reference model to enhance conventional approach which considered only a single objective on creating BP reference model by using proximity score measurement. A mixed-integer linear program is constructed to evaluate performance of the proposed MOBPGA on small-scale problems by using standard measures for multiple-objective techniques. The results will show the viability of applying MOBPGA in terms of simultaneously maximizing proximity score measurement, minimizing total duration, and total costs of the selected reference model.

• Journal of Intelligence and Information Systems
• /
• v.8 no.2
• /
• pp.177-187
• /
• 2002

Spatial data mining is a process to discover interesting relationships and characteristics those exist implicitly in a spatial database. Many spatial clustering algorithms have been developed. But, there are few approaches that focus simultaneously on clustering spatial data and assigning weight to non-spatial attributes of objects. In this paper, we propose a new spatial clustering algorithm, called DBSCAN-W, which is an extension of the existing density-based clustering algorithm DBSCAN. DBSCAN algorithm considers only the location of objects for clustering objects, whereas DBSCAN-W considers not only the location of each object but also its non-spatial attributes relevant to a given application. In DBSCAN-W, each datum has a region represented as a circle of various radius, where the radius means the degree of the importance of the object in the application. We showed that DBSCAN-W is effective in generating clusters reflecting the users requirements through experiments.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2007.10b
• /
• pp.44-48
• /
• 2007

In recent years, the relationships and inter-dependencies between the countries in East Asia have deepened, and the vision for regional cohesion such as the East Asian Community have been gradually elaborated. A Grand Design for Northeast Asia is one of these comprehensive visions that aim to improve and develop international infrastructure through cooperation in the field of transportation, energy, environment, and information technology. This study paid attention to the possibility for a system for regional cohesion and cooperation in spatial development in East Asia, and analyzed the roles of the ESDP according to the requirements of the East Asian situation. As a result, it was understood that while the development of infrastructure is a main stream in the case of the regional cohesion in East Asia, the cooperative visions for the conservation of natural and cultural heritage, which are being positioned as an important policy in the EU, have not been seen. It is a very important subject to promote the policy cohesion/cooperation on the conservation and management of natural/cultural heritage and the development of tourism infrastructure for the sustainable development of East Asia, considering the trends in the growth of the interchange population and tourism market in East Asia. It was discussed that the role of research networks like the International Landscape Architectural Symposium of Korea, China and Japan is becoming important in supporting this policy cohesion and in grasping the present conditions and trends of the spatial development of these counties.