• Investigative Magnetic Resonance Imaging
• /
• 제24권3호
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제34권4호
• /
• pp.423-430
• /
• 2010

Hot closed-forging process and the die used for forming an automotive flange were analyzed from the viewpoints of heat transfer, grain-flow lines, and stresses to obtain a forged product without defects such as surface cracks, laps, cold shots, and partial filling. The forging process including up-set, pre-forging, final forging and pressing forces was investigated using finite element analysis. The influence of the preform die and the ratio of the heights of the upper die to lower die on the forging process and die were investigated and a die shape ($10^{\circ}$ for the preform die, and 1.5:1 ratio for the final die) suitable to achieve successful forging was determined on the basis of a parametric study. All parametric design requirements such as strength, full filling, and a load limit of 13,000 KN were satisfied for this newly developed flange die. New dies and flanges were fabricated and investigated. Defects such as partial filling and surface cracks were not observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제37권6호
• /
• pp.769-774
• /
• 2013

Turbine blades and disc, which are one of the most important rotating parts of a gas turbine engine, are required to have highly efficient performance in order to minimize the total life cycle costs. Owing to these requirements, these components are exposed to severe conditions such as extreme turbine inlet temperatures, high compression ratios, and high speeds. To evaluate the structural integrity of a turbine disc under these conditions, material modeling and finite element analysis techniques are essential; furthermore, shape optimization is necessary for determining the optimal solution. This study aims to generate 2D finite element models of an axisymmetry model and a sector one and to perform thermal-structural coupled-field analysis and contact analysis. Structurally vulnerable areas such as the disc bore and disc-blade interface region are analyzed by a parametric study. Finally, an improved design is provided based on the results, and the necessity of elaborate shape optimization is confirmed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.102-108
• /
• 2004

The present experiment was conducted to assess the efficacy of methionine hydroxy analogue free fatty acid (MHAFA) in comparison to DL-methionine (DL-Met) utilizing day-old commercial broiler chicks (n=300). The chicks were randomly distributed into 30 groups of 10 chicks each. Three dietary treatments, viz. D1-maize-soybean meal based basal diet (Control), D2- control diet supplemented with DL- methionine to meet its requirements and D3-control supplemented with MHA-FA @ 1.54 times of DL-methionine used in D2, were formulated. Each dietary treatment was offered to 10 replicated groups of chicks following completely random design (CRD). The chicks fed on supplemental DL-Met had significantly higher (p<0.01) gain in body weight, followed by MHA-FA group and control during 0-3 weeks of age. During overall growth period (0-6 weeks), chicks in DL-Met and MHA-FA groups grew better (p<0.01) than those in control. Feed conversion ratio (FCR) improved (p<0.01) on supplementation of either DL- Met or MHA-FA in the basal (Control) diet during 0-3 weeks of age. The FCR for overall period, however, did not differ statistically (p>0.05) amongst the treatments. The eviscerated yields emanated from diets with DL-Met or MHA-FA were higher (p<0.01) than that in Control. Abdominal fat pad was also more (p<0.01) in broilers fed control diet than in DL-Met or MHA-FA supplemented group. Breast yield was higher (p<0.05) in MHA-FA fed broilers than those fed DL-methionine supplemented or un-supplemented diets. The efficacy of MHA-FA in comparison to DL-Met for growth was 62.11, 64.82 and 63.88% and for feed efficiency was 62.98, 67.73 and 64.01% at 0-3, 3-6 and 0-6 weeks of age, respectively, while it was 65.85, 71.40 and 67.49% for eviscerated yield, abdominal fat pad reduction and breast yield at 6 weeks of age, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권8호
• /
• pp.1078-1084
• /
• 2001

Twelve growing male lambs ($10.05{\pm}0.41kg$, 5 months age) were assigned to three equal groups in a completely randomized design and fed respectively wheat straw (WS), ammoniated wheat straw (AWS) or urea supplemented wheat straw (USWS) along with concentrate mixtures of varying protein and energy contents to meet their requirements as per NRC (1985). Despite comparable nutrient intake and digestibility, the lambs fed A WS based diet digested lower (p<0.05) crude protein. The digestibility of NDF and hemicellulose were lower while the digestibility of cellulose was higher in lambs on AWS as compared to lambs on USWS based diet. The lambs of all the three groups were in positive and comparable N, Ca and P balance except higher Ca balance in lambs fed WS based diet. The body weight change, average daily gain and feed conversion efficiency were similar among the dietary groups. All the parameters of rumen fermentation pattern were comparable between lambs of AWS and USWS based diets except ammonia-N concentration that was higher in the latter however it was lower in WS fed group. Though, the feeding cost per unit gain was comparable in lambs fed all the three diets, the cost incurred towards roughage during 120 days of experimental feeding was significantly less in lambs fed AWS than UTWS. Thus, feeding of USWS can be practiced to minimize labour cost and environmental pollution involved in the process of urea treatment without affecting the performance of growing lambs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권3호
• /
• pp.342-348
• /
• 2014

This study was conducted to examine the effects of condensed tannins (CT) from Ficus bengalensis leaves on the feed utilization, milk production and health status of crossbred cows. Eighteen crossbred dairy cows at their second and mid lactation (avg. BW $351.6{\pm}10.6$ kg) were randomly divided into two groups of nine each in a completely randomized block design and fed two iso-nitrogenous supplements formulated to contain 0% and 1.5% CT through dried and ground leaves of Ficus bengalensis. The diets were designated as CON and FBLM, respectively and fed to cows with a basal diet of rice straw to meet requirements for maintenance and milk production. The daily milk yield was significantly (p<0.05) increased due to supplementation of FBLM diet. The 4% fat corrected milk yield was also significantly (p<0.01) higher due to increased (p<0.05) milk fat in cows under diet FBLM as compared to CON. The inclusion of CT at 1.5% in the supplement did not interfere with the feed intake or digestibility of DM, OM, CP, EE, NDF, and ADF by lactating cows. Digestible crude protein (DCP) and total digestible nutrients (TDN) values of the composite diets were comparable between the groups. The blood biochemical parameters remained unaltered except significantly (p<0.05) lowered serum urea concentration in cows fed FBLM diet. There was a significant (p<0.05) increase intracellular reduced glutathione (GSH), superoxide dismutase (SOD) and catalase (CAT) activity in cows supplemented with condensed tannins. The total thiol group (T-SH) was found to be higher with reduction in lipid peroxidation (LPO) in cows of FBLM group. The cost of feeding per kg milk production was also reduced due to supplementation of Ficus bengalensis leaves. Therefore, a perceptible positive impact was evident on milk production and antioxidant status in crossbred cows during mid-lactation given supplement containing 1.5% CT through Ficus bengalensis leaves.

• Journal of Korea Multimedia Society
• /
• 제7권11호
• /
• pp.1610-1619
• /
• 2004

While researches and studies on short distance wireless communications have been actively carried out, studies on many applications of short distance wireless communications focusing on user-oriented Mobile device are also in progress. Since Bluetooth has several advantages that existing short distance communication does not have, studies on standardization have been carried out focusing on SIG, and IEEE has also jointly studied on this. Bluetooth is a short distance wireless communication technology that can be usefully applied to various kinds of applications. In this regard, this thesis presents payment system using Bluetooth, out of several application technologies of Bluetooth. This payment system is based on the scenario in which secure piconet is formed focusing on the user, the user gets in the car, fill up the gas at the gas station using his own Mobile device and pay The secure payment system presented in this thesis is designed to complement the weakness of existing Bluetooth in terms of security and to secure several requirements of security required for payment using short distance wireless communication.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권12호
• /
• pp.1711-1717
• /
• 2017

Objective: This experiment was studied the effects of various levels of crude glycerin (CG) in dairy goat diet on daily intake, milk yield, milk composition, some physical properties and some quality changes of goat milk after sterilization. Methods: Twelve 75% Saanen dairy goats (body weight = $49{\pm}3kg$; days in milk = $60{\pm}12d$) were randomly assigned in a completely randomized design to evaluate the effects of three experimental diets consisting of 0%, 5%, and 10% CG (dry matter basis) which were formulated to meet or exceed the nutrient requirements of goats. Experimental dairy goats were evaluated for feed and milk yield. Milk samples were analyzed for their composition, including fatty acids, casein profile, fat globule size, and color, and were sterilized to evaluate milk heat stability. Results: There were no significant differences between 0% and 5% CG treatments infeed. Increasing CG supplementation from 0% to 5% increased milk yield from $2.38{\pm}0.12$ to $2.64{\pm}0.23kg/goat/d$. In addition, milk samples from 5% CG treatment had the highest total solids, fat content and lactose content, and largest fat globule size. Increasing CG to 10% resulted in a decrease in milk fat. After sterilizing at $116^{\circ}C$, $F_0=3min$, goat milk samples from 5% CG treatment had slightly higher sediment content and comparatively higher degree of browning. Conclusion: Considering milk yield, milk fat content and quality of sterilized milk, 5% CG supplementation in a total mixed ration has a potential for implementation in dairy goats.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제8권1호
• /
• pp.137-149
• /
• 2004

A new software paradigm is required on the development of network and various service requirements. With this, many studies on a mobile agent have been made. For the execution of the mobile agent, migration is the most important factor that influences the performance of the mobile agent. In this paper we propose the method that leads to high migration efficiency in order to improve the performance. The features of our migration technique are as follows. First, the migration technique creates the dynamic itinerary that appropriately copes with the network conditions and the platform changes to improve the agent execution efficiency. Second, it perfecters an executed code to reduce the amount of the mobile data and reduces the execution time by instantiating the agent in advance. Third, it improves the execution efficiency by using the checkpoint-based recovery method that does not execute the agent again and recovers the process states even though the errors take place. Though the simulation we compare the proposed method with the existing methods. The simulation result shows that the proposed method outperform the existing methods in terms of migration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제10권4호
• /
• pp.629-637
• /
• 2006

Currently the research on input-queued ATM switches is one of the most active research fields. Many achievements have been made in the research on scheduling algorithms for input-queued ATM switches and also applied in commerce. The scheduling algorithms have the characteristics of improving throughput, satisfying QoS requirements and providing service fairly. In this paper, we studied on an implementation of scheduler which arbirates the input-queued ATM switches efficiently and swiftly. The proposed scheduler approximately provides 100% throughput for scheduling. The proposed algorithm completes the arbitration for N-port VOQ switch with 4-iterative matching. Also the proposed algorithm has a merit for implementing the scheduling algorithm with 1/2 area compared to that of iSLIP scheduling algorithm which is widely used. The performance of the proposed scheduling algorithm is superior to that of iSLIP in 4-iterative matching. The proposed scheduling algorithm was implemented in FPGA and verified on board-level.