• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.888-889
• /
• 2015

This paper presents a method of constructing the system-on-chip(SoC) based on embedded systems. The proposed method is more compact and effectiveness than former methods. The requirements generation start high level performance simulation and then passes to an executable specification suitable for implementation using a hardware/software co-design tool. The reuse of pre-exiting components is supported, as well as synthesis of the system interface, but only after much work is done to program the hardware/software co-design tool. The actual design flow described allows feedback among all design levels, e.g. from implementation up to requirements, throughout the process. In the future, it is necessary to development the advanced method of constructing system-on-chip based on embedded systems.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.62-76
• /
• 2010

In this paper, recent researches about the unmanned lunar lander development are studied. Objectives of this study are to derive research trends and to identify key design activities especially in early design phase of unmanned lunar lander. Case study covers SELENE-2 of Japan, LEDA and MoonNEXT of ESA, and small and modular spacecraft approach of NASA. Lunar lander concepts proposed for the International Lunar Network Anchor Nodes are also studied. For each lunar lander program, mission requirements are summarized and mission design results are reviewed. Approaches of safe lunar landing including design of navigation, guidance and control, combination of sensors, derived sensor and propulsion performance requirements are also analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.83-92
• /
• 2013

Software globalization is the supporting process of adapting computer software to different country and culture. Most efforts for software globalization have been focused on the development of software implementation techniques or tools. However, global software sold worldwide has different requirements implied by different contexts, and the difference of requirements may derive different architectural design. In this paper, we define such architectural design knowledge as knowledge models and propose a method for developing and using the knowledge models for software globalization. Also we use set-top box middleware systems for digital data broadcast to validate the applicability of the proposed models and methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.192-198
• /
• 2008

A dynamic analysis of a tilting actuator for a projection TV is presented in this study. Severe vibration of a tilting actuator deteriorates the video quality of a projection TV. For this reason, a dynamic analysis of the tilting actuator system is essential to improve the video quality. The dynamic behaviors of the mirror reactive-type tilting actuator are examined in order to obtain design requirements of the lens transmissive-type tilting actuator. Based on these design requirements, a basic design is performed for the lens transmissive-type tilting actuator. With the basic design, the dynamic characteristics of the lens transmissive-type actuator are investigated by the finite element analysis After the prototype of the actuator is manufactured, the dynamic behaviors of the prototype are examined by experiments. As a result of this study, a new design for the hinge configuration of the actuator is suggested for better performance.

• Journal of the Korean Society of Systems Engineering
• /
• v.3 no.1
• /
• pp.17-26
• /
• 2007

This paper presents a design methodology for developing a new cellular phone configuration. A case study is performed using robust design process to satisfy predicted needs from new customers under the requirement analysis process. Diagrams and selection matrices are drawn by using several useful system engineering methods. This paper presents the optimal LCD panel size of cellular phone. A structural analysis has been carried out to compare the deformation of LCD panel thickness at specific conditions by using ANSYS application tool. This entire design result can support the configuration and quality improvements for a new product for new customers.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.426-433
• /
• 2006

The requirements for the optimal building system design is numerous. However, most system designers do not take care of various design strategies. They often argue that the proper simulation tools are not existed to solve the implicated design requirements and the time to consider many alternatives of building systems are insufficient. The aim of this study is to develop the optimization interface program that considers various system design variables and eventually find both the optimal values of annual energy use and cost. Therefore, Doe2Opt is developed to easily perform simulation-optimization process based on DOE2 and GenOpt, and minimizes energy cost of small-to-medium sized building for 6.7% and that of large sized building for 3% with optimizing several HVAC system variables.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2016

The type approval system of the railway safety law, which was enforced in 2014, has been preferentially applied to the field of railway vehicles. The type approval system addresses railway vehicles and railway constituents. Unlike the previous system, it requires serial verification stages divided, in consecutive order, into verification of design compatibility and conformity and type test. These stages are in accord with international certification systems including TSI certification of the European commission. This study has been carried out to find and meet the design requirements for a coupler head, which is a part of the automatic coupler system; requirements were drawn from TSI and technical specifications that are subordinate to the domestic railway approval system. Through this study, it has been found that there exist 34 design requirements to acquire a complete coupler head. Among those requirements, 32 were verified by document inspection and two were able to be verified by performing FEA and gathering range analysis data.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.87-97
• /
• 2019

This paper focuses on the SE concept based on the weapon system design, which is the lack of systematic research at the stage of military requirements creation prior to acquisition management phase. Influence factors were derived by focusing on the core issues that were at issue in the process of requirements analysis, requirements verification, and business management in recent years. Next, the impact factor was prioritized using the AHP technique and then alternatives were suggested. As a result, through the hierarchical analysis process, 'substantiation of necessity' was found to be the most important factor in the large category, and 'satisfaction of the operating concept' was the most important factor. In addition, as a result of calculating the final weight for each nutritional factor, it was analyzed in order of 'enemy threat response ability', 'response to operational environment change', 'performance considering operational environment', and 'guaranteed power generation'. The results of this analysis suggest which factors should be focused on, firstly, based on the concept of SE by the military and JCS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.5
• /
• pp.423-443
• /
• 2009

We present the design and implementation of a unique sensing and actuation application -- the Illuminator: a sensor network-based intelligent light control system for entertainment and media production. Unlike most sensor network applications, which focus on sensing alone, a distinctive aspect of the Illuminator is that it closes the loop from light sensing to lighting control. We describe the Illuminator's design requirements, system architecture, algorithms, implementation and experimental results. The system uses the Illumimote, a multi-modal and high fidelity light sensor module well-suited for wireless sensor networks, to satisfy the high-performance light sensing requirements of entertainment and media production applications. The Illuminator system is a toolset to characterize the illumination profile of a deployed set of fixed position lights, generate desired lighting effects for moving targets (actors, scenic elements, etc.) based on user constraints expressed in a formal language, and to assist in the set up of lights to achieve the same illumination profile in multiple venues. After characterizing deployed lights, the Illuminator computes optimal light settings at run-time to achieve a user-specified actuation profile, using an optimization framework based on a genetic algorithm. Uniquely, it can use deployed sensors to incorporate changing ambient lighting conditions and moving targets into actuation. Experimental results demonstrate that the Illuminator handles various high-level user requirements and generates an optimal light actuation profile. These results suggest that the Illuminator system supports entertainment and media production applications.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.433-452
• /
• 2014

Objective: The aim of this study is to give ergonomists the brief summary of the recently published ISO standards on human-system interaction and tips for application of the standards. Background: Standard developers did hard work on developing a standard in a concise manner. But most of standards are often bulky in volume. Readers of the standards are difficult to catch key points from the voluminous contents of standards and intermingle among them. Method: Focused on newly developed display/control technology, this study reviewed the 14 ISO standards on human-system interaction published during 2008-2013 and summarized key points from them. Results: Schematic diagrams and tables concisely illustrated the processes, procedures, dimensions, or best practices recommended by the standards concerning conception, design, and usability testing for consumer products. Conclusion: The standards provided the minimum level of requirements on design and evaluation on the physical input devices, electronic displays, and control interfaces based on the current state of technology. But the minimum requirements specified in the standards nowadays become mandatory ergonomic requirements in global trade world. Application: Ergonomists can take a quick and broad view on international standardization activities on newly developed display/control technology from this summary study.