• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.98-103
• /
• 2001

This paper is conducted to compare the seismic design standard of a bridge column such as the Korean Bridge Design Standard(KBDS), EC 8, NZS 3101 and ATC 32. The KBDS adopted the seismic design requirements in 1992. The earthquake magnitude in Korea is compared with those in the west coast of the USA. It may be said that the current seismic design requirements of the KBDS provides design results, that are too conservative especially for transverse reinforcement details and amounts in reinforced concrete columns. This fact usually creates construction problems in concrete casting, due to congestion of transverse reinforcement. Furthermore, the effective stiffness; $I_{eff}$ depends on both the axial load P/$A_gF_{ck}$ and the longitudinal reinforcement ratio $A_{st}/A_g, so it is the conservative to use the effective stiffness I$_{eff}$ than the gross section stiffness Ig. Seismic design for the transverse reinforcement content of the concrete column was analyzed and considered to have an extreme-fiber compression strain, response modification factor, axial load and effective stiffness etc.c.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.124-129
• /
• 2005

A public space of the general hospitals is for the patron, especially handicapped patrons, the aged, and pregnant women. Therefore, it should be designed with consideration of the users' specific requirements for the environment. The Universal Design has been introduced as the general design principle which satisfies the users' specific requirements for the environment. The main object of this study is to propose the universal design checklist of the general space for the medical space which guarantees the patients' comfort livings without the restriction of the physical environment. The general space is determined according to the orthopedic surgery outpatients' movements in the domestic general hospital. Based on the criteria set by the law, we visited the general hospitals located in Seoul and did on-the-spot research. In this paper, we analyze the present situation and the problems of the general hospitals and propose the Universal Design Checklist.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.249-252
• /
• 2012

Structural design of the injector head part of a 7ton class thrust chamber was preformed. Structural stability of an injector head part is a very important factor for a thrust chamber of a liquid rocket engine because it is loaded by high pressure of liquid oxidizer and fuel in addition to thrust load. Structural design requirements were first defined to design the injector head part of the 7ton class thrust chamber and the basic configuration was designed on the basis of the design requirements. A high strength steel that has been locally developed was applied to the injector head part of the thrust chamber. A total of twelve design configurations have been analyzed to select structurally the most stable design configuration.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.1
• /
• pp.51-60
• /
• 2019

Purpose: This study aims to analyze design guidelines for hospice facilities in the US, UK, and Canada focused on design considerations and space requirements, and utilizes them as baseline data for establishing standards for Korean hospice facilities. Methods: Comparative review was carried out to investigate hospice care models, design consideration, and room sizes and requirements for design guideline of hospice facilities in United States, UK and Canada identified on electronic database and review articles, and to examine major characteristics and tendencies of hospice facilities. Results: The hospice care models characteristics in design guidelines is generally largely divided into hospital-based hospice facility, Nursing home-based hospice facility, and daycare hospice. The design considerations in hospice facilities focused on medical efficiency, flexibility, barrier-free environment, person-centered care, and stability. There is also a need for single resident room, rooms for the patient's family, and isolation room for infection control. Implications: it is recommended to establish standards for the installation and operation of required and recommended rooms and considerations when establishing the standards of hospice facilities in Korea. This Study is limited to a simple comparative analysis of the framework of guideline.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.300-310
• /
• 2008

Through this study, a conceptual design for the next generation high-speed EMU has been derived to meet the crash worthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulations require some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 km/h, and a collision against a standard deformable obstacle of 15 ton at 110km/h. The complete train set will be composed of 2TC-6M with 13 ton axle load, which is different from KTX with the power car of 17 ton axle load. Using theoretical and numerical analyses, a crashworthy conceptual design was derived in terms of mean crush forces and energy absorptions for principal crushable structures and devices. The derived conceptual design was evaluated and improved using one dimensional dynamic simulations for the bar-spring-damper-mass model. It is shown from the simulation results that the suggested conceptual design can easily satisfy domestic crashworthiness requirements.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.101-107
• /
• 2019

Purpose - The purpose of this study is to analyze the user requirements and developer requirements in virtual reality(VR), and suggest ways to increase the satisfaction of users who experience virtual reality. Specifically, focused on experience store of VR as a distribution retailer, user requirements were analyzed according to the results of previous research that the characteristics of Affordance, Presence, and Head Mounted Display (HMD) affect user satisfaction. Research, design, data, and methodology - Based on previous studies, in this study, we analyzed the importance of immerse, interaction, perception, and presence for the satisfaction of the user through the questionnaire, and the user experiences virtual reality (VR) The importance of HMD, Presence, Affordance, and experience satisfaction were analyzed. Based on this, we analyzed the user requirements and the developer requirements based on the questionnaires and interviews of the experts, starting from the user's desire or preference using QFD technique. Results - As a result of the analysis, the development factors that occupied a big part in the virtual reality field appeared to be visual. In detail, this showed that there was a lack of sense of presence for users. This should be improved. This paper shows that the requirements for visual, auditory, and tactile development are necessary. For the satisfaction of the users of virtual reality (VR) users, it is necessary to develop them according to their priority in consideration of importance and difficulty in the future. Conclusions - In this study, it was suggested that development according to priority should be considered, considering the difficulty level. Based on the results of this study, the following suggestions are made. First, we tried to search the list of user requirements as much as possible, but it is likely to change due to the development of VR technology. Therefore, it is necessary for developers to continually supplement user requirements with recent research literature. Second, development priorities according to difficulty level should be considered. This aspect should be considered in the actual VR development process, so if the numerical value of the difficulty is calculated, it should be presented in the research.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.11
• /
• pp.149-161
• /
• 2012

In the customer-centered world, which is used internet and social network services actively, it is important that their needs should be embraced into systems. Our study proposes a technique to normalize and select 1,800 customer's needs at C company. In order to normalize the requirements, we have specified requirements by considering a standard for requirements specification, have identified a set of keywords of requirements and have constructed a relation-graph of requirements. The graph presents objectives to design and build a system, and shows a degree of relative importance for each requirement. And then, we propose a techniques for requirements selection according to their contribution points, which are calculated using relative degree. We demonstrates our techniques by a case study of C company.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.111-121
• /
• 1999

This paper deals with an active gate drive (AGD) technolo밍T for high power IGBTs. It is based on an optimal c combination of several requirements necessmy for good switching performance under hard switching conditions, The s scheme specifically combines together the slow drive requirements for low noise and switching stress and the fast driver requirements for high speed switching and low switching energy loss The gate drive can also effectively dampen oscillations during low cunent turnlongrightarrowon transient in the IGBT, This paper looks at the conflicting requirements of the c conventional gate dlive circuit design and the experimental results show that the proposed threelongleftarrowstage active gate dlive t technique can be an effective solution.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.