• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1478-1486
• /
• 2008

The human body composed of concave and convex curvatures, and the current 3D scanning technology which involves inherent measurement errors make it difficult to extract distinct curvature plot directly. In this study, a method of extracting the clear curvature plot and its application to the cycling pants design were proposed. We have developed the ergonomic pattern from the 3D human body reflecting cycling posture. For the ergonomic design line on the 3D human body, the 3D information on the lower part of four male bodies with flexed posture was analyzed. The 3D scan data of four subjects were obtained using Cyberware. As results, the iteration of the tessellated shell was executed 100 times to obtain optimized curvature plots of the muscles on the body surface, and the boundaries of the curvature plots were applied to the design lines. Maximum(Max-pattern) and mean curvature plots(Mean-pattern) were adopted in the design line of the cycling pants, and performance of those lines was compared with that of conventional princess line(Con-pattern). The average error of total area and length in the 2D pattern developed from the 3D flexed body surface in this study were very minimal($4.58cm^2$(0.19%) and 0.15mm(0.46%)), which was within the range of tolerable limits in clothing production. The pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the cycling skin, so that the extra ease for movement and good fit was not need to be considered.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2781-2786
• /
• 2013

We examined the effect of electrode fingers and gaps of coplanar interdigitated electrode (IDE) structures to characterize the ammonium salt-containing polyelectrolyte film of resistance-based humidity sensors. IDEs designed for this purpose were flexible gold electrodes deposited on a polyimide substrate using a printing process because the geometry presents a potential for tunable sensitivity over other electrode designs. The basic design of the sensors consisted of IDEs with a different number of electrode fingers such as 3, 4, and 5 and gap sizes of 310, 360, 410, and $460{\mu}m$. Details of the AC complex impedance characteristics such as the Nyquist plot, Bode plot, and activation energy based on electrode construction were investigated.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.55-63
• /
• 1996

The situation and cause of bund collapse in steep sloping paddy area by a heavy rainfall of Chungbuk Province were investigated by field surveys. Shapes of paddy plots are irregular and average size of them is 12.6a. Surface, groundwater and plot-to-plot irrigations are being carried out in the study plots. The type of bund collapse can be divided as follows: overflow type and inundation type. The overflow type generally occurs at the bund with slope lacking the design standard. The inundation type damages paddy plots more seriously than the overflow type. It induces continuous bund collapse from a inflow-plot to a outflow-plot and includes lots of type (inside paddy) collapse, which results in much subsoil erosion. The installation of mountain stream weir and maintenance of mountain stream are proposed to prevent the inundation type collapse.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.506-513
• /
• 2016

In general, LLC converters show great promise in applications that require high efficiency, especially under light load conditions. In particular, LLC converters feature wide gain capability with pulse-frequency modulation and zero voltage switching over entire load conditions. However, output voltage increases in light load conditions. In this study, Bode plot and impedance asymptotes analyses were conducted to obtain insights into the regulation characteristics of LLC converters under light load conditions. To improve the regulation characteristic of LLC converters, a new resonant tank with an additional capacitor is proposed. The design guideline for the proposed LLC converter is determined by the Bode plot and impedance asymptotes analyses. Therefore, the proposed LLC converter achieves the light load regulation while maintaining the advantages of typical LLC converters.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.223-227
• /
• 2009

The study presents two measurement split-plot models with a restricted randomization to save cost and time. Split-plot models are used to handle HTCM (Hard To Control Measurement) factors such as high temperature and long-time catalyst control. The models developed are represented by the processes for estimating the measurement precisions, that is, gauge R&R. The study also introduces three-step procedures to indentify resolution, improve R&R reduction, and evaluate the precision effect.

• Journal of Plant Biology
• /
• v.30 no.2
• /
• pp.135-149
• /
• 1987

An experiment was made in order to analyze the growth characteristics and productivity of Zoysia japonica under control, mowing and TIBA treatment conditions at the experimental farm of Kyung Hee University. The field was planned by the split plot design method and each treatment was given to two plots (40$\times$40 and 100$\times$100 mm) and was replicated three times. Each plot was 9$m^2$ for Zoysia japonica. The sampling of each plot was taken once a week after sowing. In order to know the dry matter of total standing crops, each organ of plants was kept at 9$0^{\circ}C$ and weighed. Total leaf area of a plant was measured by drawing method. The author adopted the growth analysis of English School. Holocellulose analysis by sodium chlorite method was made. The increasing rate of LAI was high in all plots between 10th and 12th week after sowing and high growth rate of assimilatory organ was observed in low density area of TIBA plot. Between 10th and 12th week after sowing all the experimental plots showed high increasing rate of standing crop and in the process of growth each density area of TIBA plot recorded high increasing rate. In all the plots F/C ratio and RGR were high when the growth rate of assimilatory organ was increasing cosiderably, and the higher the planting density was, the higher F/C ratio was recorded. In all the plots NAR recorded maximum rate before the growth period to show a high increase of RGR. In the process of the growth TIBA plot showed high icnreasing rate of NAR. CGR showed high value in high density areas of all the plots and reached its maximum in the 13th week after sowing. Compared to the other experimental areas the low planting density areas of control plot and TIBA plot showed considerable earlier lignification indicating low Holocellulose content in the growth process.

• Journal of the Korean Professional Engineers Association
• /
• v.1 no.1
• /
• pp.18-25
• /
• 1968

Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is for higher Than that of athec crops, submerged condition of rice paddy is not Necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experimental plots were set up by means of sandomized block design with three duplication; (a) All time submerged, (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods Were (a) Initial sage, (b) Inter-stage, and (c) Yast stage. The topsoil of the three plots were excavated to the depth of 30 cm and then compacted with clay of 6 cm thickness. There after, they were piled up with the excavated top soils, leveled and cored with clay of 6 cm thickness around footpath in order to prevent leakage. The results obtained from the experiments are as follows, 1. There is no difference among the three experiments plots in terms of physical and chemical conditions, soil properties, and other characteristics. 2. Culm length and ear length are not affected by different irrigation methods. 3. There is no difference in the mature rate and 1, 000 grain weight of rice for the three plots. 4. The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17.8 percent. 5. The clay lined plot whose water holding capacity was held 5 days long, needs only to be irrigated every 7 days. 6. The clay lined plot shows an increased yield over the untreated plot ; over all-the-time submerged plot by 18 percent ; extremely controlled plot by 18 percent, and economically controlled plot by 33 percent. 7. It may be saved in water requirement about one Thirds.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.523-535
• /
• 2019

Purpose: We research on the efficient response surface methodology(RSM) design to develop a design space in Quality by Design(QbD). We propose practical designs for the successful construction of the design space in QbD by allowing different number of replicates at the box points, star points, and the center point in the rotatable central composite design(CCD). Methods: The fraction of design space(FDS) plot is used to compare designs efficiency. The FDS plot shows the fraction of the design space over which the relative standard error of predicted mean response lies below a given value. We search for practical designs whose minimal half-width of the tolerance interval per a standard deviation is less than 4.5 at 0.8 fraction of the design space. Results: The practical designs for the number of factors between two and five are listed. One of the designs in the list could be chosen depending on the experimental budget restriction. Conclusion: The designs with box points replications are more efficient than those with the star points replication. The sequential method to establish a design space is illustrated with the simulated data based on the two examples in RSM.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.304-311
• /
• 2010

Korea National Forest Inventory System has been adopting different cluster plot design and new equations to estimate growing stock volumes since 2006. These changes have resulted in volume estimations which show some difference from previous ones. This study is to find out the source of such difference. For this, relevant data was collected from 80 plots of 20 cluster samples according to the cluster plot design applied to 4th and 5th National Forest Inventory. Then growing stock volumes were estimated by using current and previous individual tree volume equations respectively. An investigation was made to detect whether such difference in volume estimates was originated from the changes in cluster plot design or from using different volume equations. T-test results showed that the difference from changes in cluster plot design was negligible. Instead, changes in volume equations had statistically significant effects in volume estimation. Since the volume estimation by the 5th National Forest Inventory would bring overestimation by applying different volume equations, all the volume estimations made prior to 2006 would require necessary modifications for international reporting.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.218-223
• /
• 1996

This experiment was carried out to investigate the effect of planting date and planting density on yield and yield components of Fritillariae bulbus from 1989 to 1991. The Chungbuk local variety was used, and the experimental materials were planted six times with 10 days interval from Aug. 20 to Oct. 10. 33, 22, 17 and 13 bulbs were planted by the square meter, respectively. The compound fertilizer for garlic $(N\;-\;P_2O\;-\;K_2O_5=9\;-\;14\;-\;10)$ was applied by 80kgs to the 0.1ha before planting. The experimental design was randomized block design with 3 replications. As the planting dates were earlier, the emerging dates were earlier, too. But the delay of 50 days in the planting affected to the delay of 14 days in the em­erging dates. The plant height was 22.7cms in the Aug. 20 plot. As the planting were later, the plant heights were shorter by $2.4{\sim}5.6cms$ than that. As compared with the 829kgs by the 0.1ha of Aug. 30 plot, the others recorded 1 percent increase in the Aug. 20 plot, 4 percent decrease in the Sep. 10 plot, 26 percent decrease in the Sep. 20 plot, 35 percent decrease in the Sep 30 plot, and 38 percent decrease in the Oct. 10 plot. So, the suitable planting dates were from Aug. 20 to Aug. 30.The emerging date of 33 bulb plot by the square meter was March 7, but as the planting densities were sparse, the emerging dates delayed by one to three days. The plant height of the 33 bulb plot by the square meter was 21. 8cms, but the other plots were short by $0.7{\sim}1.8cms$. The number of shoots of the 33 bulb plot by the square meter was 6.1. but the other plots recorded 0.4 increase in the 22 bulb plot, 0.6 increase in the 17 bulb plot and 0.5 increase in the 13 bulb plot compared with that of the 33 bulb plot. Accordingly, the number of shoots in the sparse planting plot was more than that in the dense planting plot. As compared with the 854kgs by the 0.1ha of the 22 bulb plot, the other plots recored 2 percent in­crease in the 33 bulb plot, 16 percent decrease in the 17 bulb plot and 34 percent decrease in the 13 bulb plot. All things considered, for the culture of Fritillaria thungergii MIQUEL in the middle region, Aug. 25 and 22 bulbs by the square meter were suitable for the planting date and density.