• The Korean Nurse
• /
• v.34 no.5
• /
• pp.68-81
• /
• 1996

In order to see the development of nursing related research activities in Korea over the last three decades, abstracts of almost all of the Masters and Ph. D. theses that had appeared from 1961 up to August 1991 were collected. Number of theses amounted to 1779(76%) out of a total of 2354 theses. We analysed the papers research patterns, which are research problem, research design, population, place. Here is what we have found. 1). The types of research problems were as follows. 58.0% papers did factor-analysis, 29.1% studied factor~relations, 11.4% situation relations and 1.5% did situation~creations. With respect to the years, we found that the factor-analysis papers decreased with time but the factor~relating, the situation -relating, and the situation~creating papers were increased. Especially the situation-creating paper increased notably since the 80s'. Relating to the kind of degrees, we found that for M.S.theses 60.2% of the papers did factor-analysis, 29.0% the factor-relating studies, 10.4% the situation-relating studies, and 0.4% the situation -creating studies. For the Ph.D. theses 30.5% did the factor~relating, 30.5% the situation-relating. and 20.0% the situation-creating papers. Considering the graduate schools, we found that the regular graduate schools and the graduate school of education produced about the same number of papers of each kind, but 81.2% and 64.6% papers produced by the graduate school of public health and the graduate school of public administration, respectively, did the factor-analysis thus taking majority of the papers. 2). Research designs were as follows : 10.8% experimental studies, 89.0% non experimental studies, and 0.2% quality studies were found. So the majority of the research designs were nonexperimental. We see a meaningful difference between the M.S.theses showing 9.8% experimental studies and 90. 1% nonexperimental studies. and Ph.D. theses showing 28.4% experimental studies and 68. 4% nonexperimental studies. Relating to the graduate schools, we find that the regular graduate schools and the graduate school of education with 15.8% and 10.6% experimental studies respectively, did a little more experimental studies than other schools. but still the regular graduate schools, the graduate school of public health, and the graduate school of education each show 83.8%, 97.4%, and 89.4% nonexperimental studies, so most schools are concentrating on nonexperimental studies. 3). On the relation between research problem and research design, experimental studies show 88.0% of situation-relations and 6.8% of factor-relations. Nonexperimental studies had factor-analysis taking the majority by 64.4% and 31.9% were factor-relations. 4). On the research subjects, we have 90.8% of the papers dealing with a single subject and 9.2% of the papers dealing with two or more subjects. Most of the research subjects are patients or nurses for the regular graduate schools and the graduate school of education, but for the graduate school of administration as much as. 60% of the studies took nurses as subjects. Subjects taken were patients, nurses. and students in decreasing order for the M.S. theses and for patients, women, and nurses again in decreasing order for the Ph.D.theses. 5). On the places of study, we've had 47, 8% of the studies done in hospital rooms, 15, 1% in schools, and 9, 6% in the local community, With respect to the years, we found 36.7% in the hospital rooms, 22.4% in the schools, and 14, 8% in the local communities in the 1970's and 50.1%in the hospital rooms, 13.4% in the schools. and 9, 2% in the local communities in the 80's.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.1-13
• /
• 2012

This study aimed at learning the values and meanings of the letters carved on the rocks all over Mt. Sangdu located at the boundary between Kimje-si and Jeongeup-si of Jeollabuk-do by grasping the current state of them, investigating the patterns and contents of them, and understanding the spatial and landscape properties of the region where the rocks are scattered. The results of this study are as follows; The name of Mt. Sangdu came from the mountain with the same name located in India where Buddha were seeking the truth, and means auspicious. With the recognition of ancient maps and books, various propitious spots also made the landscape symbols of Mt. Sangdu solidify. Whoam, Chaangsuk-Kim, Weolgye Young-Cho Song and the members of Cheonggye Society like Dongcho Seok-Gon Kim led the creation of the rocks, and the 41 letter-carved rocks all over four water systems were found out and all of them were carved with Chinese characters. The letters were usually carved on flat and broad rocks, and they mainly had the shape of a small waterfall and a wide waterfall of under 1 meter height. 25(60.9%) of the carved letters were about moral training, and it seemed that they wanted to protect their pride under the shackle of the Japanese colonization over Korea. The styles of handwriting are Hangseo and Jeonseo except for names, and show various and complex styles. The mix composition of the carved letters of 'Yusubulbu(流水不腐)' of Choseo and the rocks of Takjok(濯足) is extraordinary, and the letters carved as the shape of Nakkwan(落款) have artistic value and degree of finishing. It seemed that intellectuals during the Japanese colonization over Korea in the 1930s considered Mt. Sangduasa highly valuable region because they expressed their hope and wish for the new world on the rocks. The letters on the rocks of Mt. Sangdu are invaluable cultural landscaping elements for the improvement of landscaping symbolism of Mt. Sangdu because of colliding values and spirits of the time of 'the anguish and pain of intellectuals' and 'the status of living joyfully outside of the mundane world.'

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.1-13
• /
• 2010

This research was conducted to understand the characteristics and traits of Baekje's palace backyard by studying and analyzing the usage, shape, size, material, and place of origin of the odd-shaped stones found at the remains of Baekje's palace in Waggung-ri, Iksan. The results of the research are as following. The odd-shaped stones found at the Baekje palace backyard were used for two purposes. Some of the stones were used as heaping stones(疊石) for the stone waterfall in the backyard while others were used as ornamental stones(置石) to exhibit the uniqueness and beauty of the stone themselves. The stones used for the waterfall had various shapes and materials and were arranged to symbolize the beauty of natural scenery. On the other hand, the ornamental stones were used to exhibit their beauty of forms. Among the twenty six ornamental stones, four were large, four were mid-sized, and eighteen were small. The twenty four heaping stones used for the waterfall were all categorized as small. All of the stones were not too big, easily coming into sight of human beings. The heaping stones were mostly limestones, and some of them were metamorphic rocks such as marble, quartz, green rock, slaty rock, and phyllite. Almost all of the odd-shaped stones used for Baekje's palace backyard have beautiful patterns and specific forms that resemble natural scenes or animals such as a turtle, terrapin, pig, bear, or elephant. Some of the ornamental stones apparently went through carving to emphasize the unique shapes. Considering the usage and characteristic of the odd-shaped stones, one of the most characteristic feature of the Wanggung-ri palace backyard can be said to be 'the garden of odd-shaped stones'. Meanwhile, according to references, interviews, questionings, and on-the-spot surveys on the people who quarried the stones, the stones found at the remains of the Wanggung-ri palace came mostly from Mt. Cheonho in Hosan-ri, Yeosan-myeon, Iksna, and Mt. Shidae in Dosoon-ri, Wanggung-myeon.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.69-78
• /
• 2009

Korea has achieved significant economic growth with building the Gyeongbu Expressway. As the number of new road construction projects has decreased, it becomes more important to maintain optimal status of the current road networks. One of the best ways to accomplish it is weight enforcement as active control measure of traffic load. This study is to develop High-speed Weigh-in-motion System in order to enhance efficiency of weight enforcement, and to analyze patterns of overloaded trucks on highways through the system. Furthermore, it is to review possibilities of developing overweight control system with application of the HS-WIM system. The HS-WIM system developed by this study consists of two sets of an axle load sensor, a loop sensor and a wandering sensor on each lane. A wandering sensor detects whether a travelling vehicle is off the lane or not with the function of checking the location of tire imprint. The sensor of the WIM system has better function of classifying types of vehicles than other existing systems by detecting wheel distance and tire type such as single or dual tire. As a result, its measurement errors regarding 12 types of vehicle classification are very low, which is an advantage of the sensor. The verification tests of the system under all conditions showed that the mean measurement errors of axle weight and gross axle weight were within 15 percent and 7 percent respectively. According to the WIM rate standard of the COST-323, the WIM system of this study is ranked at B(10). It means the system is appropriate for the purpose of design, maintenance and valuation of road infrastructure. The WIM system in testing a 5-axle cargo truck, the most frequently overloaded vehicle among 12 types of vehicles, is ranked at A(5) which means the system is available to control overloaded vehicles. In this case, the measurement errors of axle load and gross axle load were within 8 percent and 5 percent respectively. Weight analysis of all types of vehicles on highways showed that the most frequently overloaded vehicles were type 5, 6, 7 and 12 among 12 vehicle types. As a result, it is necessary to use more effective overweight enforcement system for vehicles which are seriously overloaded due to their lift axles. Traffic volume data depending upon vehicle types is basic information for road design and construction, maintenance, analysis of traffic flow, road policies as well as research.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.4-29
• /
• 2015

To protect cultural heritages from damage and destruction, evaluating the crime prevention environments is considered extremely important. This study analyzed the crime patterns related to cultural heritages, classified the crime environments by their types, and deduced the elements of the CPTED(Crime Prevention Through Environment Design), aiming to present the indices for evaluating the crime prevention environments. The results of this study can be summarized as follows. First, the crimes related to cultural heritages that must be prevented were identified as the night time trespassing and arson. According to the results of the analysis of external environments based on crime actions, the crime prevention environments of cultural heritages were classified into 10 types. Second, the important evaluation principles of the cultural heritage CPTED were the access control, surveillance reinforcement and the surrounding environment. Third, the access control that cover the internal region, boundary, external region and surroundings were classified into 22 indices. The surveillance reinforcement covers natural, organized and mechanical surveillance with 21 indices. Fourth, the applicability of the CPTED evaluation index was presented according to the types of the cultural crime prevention environments. The results confirmed that the maximum 43 indices were applicable to the seowon(lecture hall), hyanggyo(Confucian school), and gwana(district government office), and the minimum 10 indices, to the ramparts. Finally, the 43 indices were applied to Donam Seowon to validate their applicability. The results confirmed that most of the indices were applicable with the partial supplements. The evaluation index presented in this study is likely to contribute to studies in the cultural heritage CPTED field and to the protection of cultural heritages. Furthermore, this study is considered significant because it unleashed continuous concerns on and developments of CPTED. However, as the field survey to validate the applicability of the indices was limited to only one type, it may require further objective verification such as through an expert's examination of the validity and applicability of the evaluation index. In addition, to accommodate the index in related policies and systems, more precise verifications of the indices by type are considered necessary.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.848-857
• /
• 2018

Recently, around the world, active development of new renewable energy sources including solar power, waves, and fuel cells, etc. has taken place. Particularly, floating offshore wind farms have been developed for saving costs through large scale production, using high-quality wind power and minimizing noise damage in the ocean area. The development of floating wind farms requires an evaluation of the Maritime Safety Audit Scheme under the Maritime Safety Act in Korea. Floating wind farms shall be assessed by applying the line and area concept for systematic development, management and utilization of specified sea water. The development of appropriate evaluation methods and standards is also required. In this study, proper standards for marine traffic surveys and assessments were established and a systemic treatment was studied for assessing marine spatial area. First, a marine traffic data collector using AIS or radar was designed to conduct marine traffic surveys. In addition, assessment methods were proposed such as historical tracks, traffic density and marine traffic pattern analysis applying the line and area concept. Marine traffic density can be evaluated by spatial and temporal means, with an adjusted grid-cell scale. Marine traffic pattern analysis was proposed for assessing ship movement patterns for transit or work in sea areas. Finally, conceptual design of a Marine Traffic and Safety Assessment Solution (MaTSAS) was competed that can be analyzed automatically to collect and assess the marine traffic data. It could be possible to minimize inaccurate estimation due to human errors such as data omission or misprints through automated and systematic collection, analysis and retrieval of marine traffic data. This study could provides reliable assessment results, reflecting the line and area concept, according to sea area usage.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.20 no.1
• /
• pp.43-54
• /
• 2021

The results of the research and analysis are as follows: First, from the existing 57 types, 51 types were additionally discovered through the Gyeonggi-do research and analysis, and a total of 108 types could be subdivided. Second, as a result of the survey and analysis of Gyeonggi-do, 17 new unique types and the causes were found Third, out of 7 less than 10 years old schools, the Ns1 and Ns2 types were accounting for almost all of them. Of the 19 mid-term new schools, the Nm7 type accounted for 32.3%, and of the 41 long-term new schools, the most occupied type was Nl13 (33.5%). Among the 20 long-term rising types of 20 to 30 years old schools, the Ai19 type accounted for 22.6%, and the Ai8 type accounted for 19.4%. Among the 21 long-term decline types in existing schools, 17.0% was for the Ad5 type, 16.1% for the Ad15 type, 15.2% for the Ad10 type, 10.0% for the Ad7 type, and 8.1% for the Ad8 type.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.3
• /
• pp.25-37
• /
• 1988

The purpose of this study is to fmd out the bask data for irrigation plans of tomato and chinese cabbage during the growing period, such as total amount of evapotranspiration, coefficients of evapotranspiration at each growth stage, the peak stage of evapotranspiration, the maximum evapotranspiration, optimum irrigation point, total readily available moisture and intervals of irrigation date. The plots of experiment were arranged with split plot design which were composed of two factors, irrigation point for main plot and soji texture for split plot, and three levels, irrigation points with PF 1.8, PF 2.2, PF 2.6 for tomato and those with PF 1.9, PF 2.3, PF 2.7, for Chinese cabbage, soil textures of silty clay, sandy loam and sandy soil for both tomato and Chinese cabbage, with two replications. The results obtained are summarized as follows 1. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteoralogical factors considered. Therefore, the pan evaporation is enough to be used as a meteorological index measuring the quantity of evapotranspiration. 2. 1/10 probability values of maximum total pan evaporation during growing period for tomato and Chinese cabbage were shown as 355.8 mm and 233.0 mm, respectively, and those of maximum ten day pan evaporation for tomato and Chinese cabbage, 68.0 mm and 43.8 mm, respectively. 3. The time that annual maximum of ten day pan evaporation can be occurred, exists at any stage of growing period for tomato, and at any growth stage till the late of Septemberfor Chinese cabbage. 4. The magnitude of evapotranspiration and of its coefficient for tomato and Chinese cabbage was occurred in the order of pF 1.8>pF 2.2>pF 2.6 and of pF 1.9>pF 2.3>pF 2.7 respectively in aspect of irrigation point and of silty clay>sandy loam>sandy soil in aspect of soil texture. 5. 1/10 probability value of evapotranspiration and its coefficient during the growing period of tomato were shown as 327.3 mm and 0.92 respectively, while those of Chinese cabbage, 261.0 mm and 1.12 respectively. 6. The time that maximum evapotranspiration of tomato can be occurred is at the date of fortieth to fiftieth after transplanting and the time for Chinese cabbage is presumed to he in the late of septemben At that time, 1/10 probability value of ten day evapotranspiration and its coefficient for tomato is presumed to be 74.8 mm and 1.10 respectively, while those of Chinese cabbage, 43.8 mm and 1.00. 7. In aspect of only irrigaton point, the weight of raw tomato and Chinese cabbage were mcreased in the order of pF 2.2>pF 1.8>pF 2.6 and of pF 1.9>pF 2.3>pF 2.7, respectively but optimum irrigation point for tomato and Chinese cabbage, is presumed to be pF 2.6 - 2.7 if nonsignificance of the yield between the different irrigation treatments, economy of water, and reduction in labour of irrigaion are synthetically considered. 8. The soil moisture extraction patterns of tomato and Chinese cabbage have shown that maximum extraction rate exists at 7 cm deep layer at the beginning stage of growth m any soil texture and that extraction rates of 21 cm to 35 cm deep layer are increased as getting closer to the late stage of growth. And especially the extraction rates of 21 cm deep layer and 35 cm deep layer have shown tendency to be more increased in silty clay than in any other soils. 9. As optimum irrigation point is presumed to be pF Z6-2.7, total readily available moisture of tomato in silty clay, sandy loam and sandy sofl becomes to be 19.06 mm, 21.37 mm and 20.91 mm respectively while that of Chinese cabbage, 18.51 mm, 20.27 mm, 21.11 mm respectively. 10. On the basis of optimum irrigation point with pF 2.6 - 2.7 the intervals of irrigation date of tomato and Chinese cabbage at the growth stage of maximum consumptive use become to be three days and five days respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.1
• /
• pp.49-58
• /
• 1992

The purpose of the experiment was to determine the effect of plant density and pattern on growth characteristics, total dry matter yield. protein yield and palatability of sorghum-sudangrass hybrid (Sordan 79). The main treatment was three levels of plant density (Skg, 15kg. 30kg/ha) and the sub treatment was two plant patterns of square and rectangular planting.The experiment was arranged as a split plot design and conducted on the Experimental Livestock Farm of Kon-Kuk Univ. in Chungju, 1989. The results obtained are summarized as follows :1. As the plant density was increased, plant length, leaf length, leaf width(P<0.05) and leaf number were gradually decreased, but in the same plant density, plant length, leaf length, leaf width and leaf number were generally increased in the rectangular plot. 2. In the first cutting time, the ratio of leaf was the highest at the rectangular plot of high density (30kg/ha, 25cm$\times$4cm), but in the second cutting time, the ratio of leaf was the highest at the square plot of medium density (15kg/ha, 14cm$\times$ 14cm). 3. The ratio of dead stubble after cutting was generally increased by increasing the plant density. Also, in the same planting density, the ratio of dead stubble was generally increased in the square plot. 4. The tiller number per plant tended to decreased by increasing thc plant density, and the tiller number was increased in the rectangular plot. In the same plant density. 5. Total fresh and dry matter yield were the highest at the rectangular plot of medium density (IS kg/ha, 33cm$\times$6cm) wholly, but the low density was shown the lowest.6. The crude protein content was increased by increasing the plant density per unit area(P<0.05) and the protein yield was also increased by increasing the planting density. 7. According to the increase of plant density, the stem was thinned, but NDF, ADF did not show different. The palatability was in the order of high (30kg/ha))medium (15kg/ha))low density(5kgiha) at the first cutting time, but it was in the order of high)low)medium density at the second cutting time.