• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.195-199
• /
• 2004

Recently, optical disc drives are required to have high density and capacity in according with development of high definition images and rapid increase of various informations. Consequently, the numerical aperture becomes larger, the wavelength of laser is coming to be short. However, it deteriorates rolling mode effect on an optical pickup actuator. Therefore, this paper proposes new design and optimization of tracking coils for reducing it. First, we verify that discord between the center of force and the center of mass by restrictions of design condition is an important factor of rolling mode effect. Then, in order to reduce it, we propose new design parameters of tracking coils. Finally, we reduce rolling mode effect through optimization of tracking coils using Taguchi method and response surface method.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제20권5호
• /
• pp.311-318
• /
• 2016

The lead-rubber bearing (LRB) dissipates seismic energy through plastic deformation of lead core. Under large-displacement cyclic motion, the temperature increases in the lead core. The shear strength of a lead-rubber bearing is reduced due to the heating effect of the lead core. In this study, the seismic responses such as displacement increasing, shear strength and vertical stiffness degradations of LRB due to the heating effect are evaluated for design basis earthquake (DBE) and beyond design basis earthquake (150% DBE, 167% DBE, 200% DBE).

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.561-568
• /
• 2005

The factors affecting the long-term design strength of geogrid can be classified into factors on creep deformation, installation damage, temperature, chemical degradation and biological degradation. Especially, creep deformation and installation damage are considered as main factors to determine the long-term design strength of geogrid. Current practice in the design of reinforced soil is to calculate the long-term design strength of a reinforcement damaged during installation by multiplying the two partial safety factors, $RF_{ID} and RF_{CR}$. This method assumes that there is no synergy effect between installation damage and creep deformation of geogrids. Therefore, this paper describes the results of a series of experimental study, which are carried out to assess the combined effect of installation damage and creep deformation for the long-term design strength of geogrid reinforcement. The results of this study show that the tensile strength reduction factors, RF, considering combined effect between installation damage and creep deformation is less than that calculated by the current design method.

• Journal of the Korean Society for Precision Engineering
• /
• 제25권5호
• /
• pp.132-139
• /
• 2008

To meet demand of big capacity and high speed rotation for washing machine, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Also, Vibration occurs due to the frequency of the rotating parts. But, shaft has various design factors such as diameter and distance between bearings according to configuration of shaft, the optimal values can't be easily determined. Using a design of experiment (DOE) based on the FEM (Finite Element Method), which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor under bending, twist and vibration and proposed optimum design using center composition method among response surface derived from regression equation of simulation-based DOE.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 한국디자인학회 2002년도 가을학술발표대회 디자인학 연구
• /
• pp.158-159
• /
• 2002

• Proceedings of the Korea Society of Design Studies Conference
• /
• 한국디자인학회 1998년도 봄 학술대회 발표논문집 디자인 학 연구
• /
• pp.58-59
• /
• 1998

• Archives of design research
• /
• 제16권3호
• /
• pp.273-280
• /
• 2003

Priming Effect, as a part of "Contextual Effect" is the phenomenon that pre-searched product information influences consecutive product evaluation. "Priming Effect" is different from other types of "Contextual Effects" in that pre-searched information doesn't have an direct effect on product evaluation, but an indirect effect which means that pre-searched information influences interpretation of consecutive product evaluation. On the previous theoretical background, this study investigated that how visual images can influence consumer preference and product choice, introducing concept of priming effects into the design of on-line shopping malls. This experiment adopted the digital cameras as the experimental stimulus target products and designed the individual web pages by priming the attributes of price and size. In result of analysis, the difference of product preference by priming attributes was proved to be statistically significant. In this reason, suggesting the background of commercial web page can be the significant factor in choosing products, the priming effects introduced into the design can be positively employed in online advertising.mployed in online advertising.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 한국디자인학회 2002년도 봄 학술발표회 논문집
• /
• pp.92-93
• /
• 2002

• Proceedings of the Korea Society of Design Studies Conference
• /
• 한국디자인학회 2003년도 봄 학술발표대회논문집
• /
• pp.238-239
• /
• 2003

• Proceedings of the Korea Society of Design Studies Conference
• /
• 한국디자인학회 2003년도 봄 학술발표대회논문집
• /
• pp.140-141
• /
• 2003