• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.919-939
• /
• 2021

As a next-generation communication technology, 5G networks are capable of handling large amounts of traffic based on higher speeds, shorter communication delays, and higher connectivity compared to 4G networks. In this 5G network environment, base stations are installed all over the city at high density due to their characteristics, and are connected to user terminals to provide services. Therefore, if the base station is damaged by a malicious attacker, it is expected to cause great damage to users and society as a whole. So the need for secure communication equipment such as 5G base stations has emerged. Therefore, in this paper, we propose the security functional requirements derived using threat modeling, a systematic methodology for 5G base stations, and the security assurance requirements at the level that can cope with the backdoor issues. The security requirements proposed in this paper can be used for base station design and development to construct a secure network environment as a security evaluation standard for 5G base stations.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.417-428
• /
• 2021

The combustion characteristics of anthracite, which follow a complex process with low reactivity, must be considered through the dynamic behavior of circulating fluidized bed (CFB) boilers. In this study, computational fluid dynamics (CFD) simulation was performed to analyze the combustion characteristics of anthracite in a pilot scale 0.1 MW_th Oxy-fuel circulating fluidized bed (Oxy-CFB) boiler. The 0.1MW_th Oxy-CFB boiler is composed of combustor (0.15 m l.D., 10 m High), cyclone, return leg, and so on. To perform CFD analysis, a 3D simulation model reactor was designed and used. The anthracite used in the experiment has an average particle size of 1,070 ㎛ and a density of 2,326 kg/m³. The flow pattern of gas-solids inside the reactor according to the change of combustion environment from air combustion to oxygen combustion was investigated. At this time, it was found that the temperature distribution in air combustion and oxygen combustion showed a similar pattern, but the pressure distribution was lower in oxygen combustion. addition, since it has a higher CO₂ concentration in oxygen combustion than in air combustion, it can be expected that carbon dioxide capture will take place actively. As a result, it was confirmed that this study can contribute to the optimized design and operation of a circulating fluidized bed reactor using anthracite.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.695-700
• /
• 2018

This paper presents the development of compact and lightweight broadband power amplifier module using HMIC (Hybrid Microwave Integrated Circuit) technology that could be high-density integration for many non-packaged microwave components into the small area of a high dielectric constant printed circuit board, such as a ceramic substrate, also using the special design and fabrication schemes for the structure of minimized electromagnetic interference to obtain the homogeneous electrical performance at the wideband frequency. The results confirmed that the small signal gain has a gain flatness of ${\pm}1.5dB$ within the range of 32 to 36 dB. In addition, the output power satisfied more than 30 dBm. The noise figure was measured within 7 dB, and OIP3 (Output Third Order Intercept Point) was more than 39 dBm. The fabricated broadband power amplifier satisfied the target specification required to electrically drive the high power amplifiers of jamming generators for electronic warfare, so the actual applicability to the system was verified. Future studies will be aimed at designing other similar microwave power amplifiers in the future.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.413-425
• /
• 2019

We see many images every day, some of these images are stored in memory, and the majority are immersed in the unconscious world. Visual elements are seen by personal attention or by visual or biological attention factors. Specific and clear discovery of this visual attention has not yet been made. However, there is an interesting discussion of this visual attention in the fields of interior, design, visual perception, advertising, and psychology. Advertising photographers are expected to produce what their work will have on viewers and consumers. However, the adjustment of subject, exposure, color, or post-production, which could have a visual effect on the consumer, was determined only by the photographer's senses rather than the experimental verification. The advertisement photographs provide a specific image related to the object to be advertised and deliver a certain message. Therefore, it is necessary to understand the effect of the image in a certain visual way. According to previous studies, there are two major factors that affect the visual impression of the viewer. One is the factor depending on the type and content of the subject and the other is the factor about the density and color of the subject. The purpose of this study is to investigate the meaningful changes in the visual perception depending on the shape, content, color and tone of the subject, which can be called the main subject, And to analyze the effects of I will study some implications of visual elements through various analyzes.

• Journal of Animal Science and Technology
• /
• v.61 no.4
• /
• pp.204-215
• /
• 2019

This experiment was conducted to evaluate the effect of dietary energy and crude protein (CP) levels on growth performance, blood profiles, and carcass traits in growing-finishing pigs. A total of 180 crossbred pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc) with an average body weight of $30.96{\pm}3.068kg$ were used for a 12-week feeding trial. Experimental pigs were allotted to a $2{\times}3$ factorial arrangement using a randomized complete block (RCB) design. The first factor was two levels of dietary metabolizable energy (ME) density (13.40 MJ/kg or 13.82 MJ/kg), and the second factor was three dietary CP levels based on subdivision of growing-finishing phases (high: 18%/16.3%/16.3%/13.2% middle: 17%/15.3%/15.3%/12.2% and low: 16%/14.3%/14.3%/11.2%). Average daily gain (ADG) and gain-feed ratio (G:F ratio) decreased as dietary CP level was decreased linearly (linear, p < 0.05; p < 0.05, respectively) in the early growing period, and G:F ration also decreased as dietary CP level was decreased linearly (linearly, p < 0.05) over the whole growing phase. Over the entire experimental period, G:F ratio decreased as dietary ME level decreased (p = 0.01). Blood urea nitrogen (BUN) concentration was increased as dietary energy level decreased in growing period (p < 0.01). During finishing period, total protein concentration was decreased by lower dietary energy level (p < 0.05). In this study, there were no significant differences in proximate factors, physiochemical properties, muscle TBARS assay results, pH changes, or color of pork by dietary treatments. However, saturated fatty acid (SFA) increased (p < 0.01) and polyunsaturated fatty acid (PUFA) decreased (p < 0.05) when ME was decreased by 0.42 MJ/kg in growing-finishing pig diets. In addition, monounsaturated fatty acid (MUFA) tended to increase when CP level was decreased in growing-finishing pig diets (p = 0.06). A growing-finishing diet of 13.82 MJ/kg diet of ME with the high CP level can improve growth performance and show better fatty acids composition of pork.

• Journal of Animal Science and Technology
• /
• v.61 no.3
• /
• pp.154-162
• /
• 2019

This experiment was conducted to evaluate the effect of dietary energy and crude protein (CP) levels on reproductive performance, litter performance, milk quality, and blood profiles in gestating sows. A total of 59 multiparous sows (Yorkshire ${\times}$ Landrace) with similar body weights (BW), backfat thickness (BF), and parity were assigned to one of six treatments with 9 or 10 sows per treatment using a $2{\times}3$ factorial arrangement and completely randomized design. The first factor was two levels of dietary metabolizable energy (ME) density (13.40 or 13.82 MJ/kg) and the second factor was three dietary protein levels based from 35 day in gestating phases (10.5%, 12%, and 13.5%). Backfat thickness change in lactating sows decreased linearly as CP level increased (p = 0.03). Increased energy level in the gestating sow diet tended to increase the total number of piglets born (p = 0.07), but piglet weight decreased (p = 0.02). Dietary CP level had a negative effect on colostrum quality. Casein, protein, total solid, and solids-not-fat concentrations decreased linearly and lactose level increased linearly as CP level in the gestating sow diet increased (casein%: p = 0.03; protein%: p = 0.04; lactose%: p = 0.06; total solids: p = 0.03; solid-not-fat: p = 0.03, respectively). However, improving ME by 0.42 MJ/kg had no significant effect on the chemical composition of sow colostrum. There were no significant differences in blood glucose concentration in gestating sows when sows were fed different levels of energy during gestation, but blood glucose increased at 21 day of lactation when energy increased by 0.42 MJ/kg (p = 0.04). Blood urea nitrogen concentration increased linearly when dietary CP levels increased at 110 day in gestation, 24-hours postpartum, and 21 days of lactation (linear, p < 0.05, p < 0.05, and p < 0.05, respectively), and it also increased when dietary energy increased at 110 days of gestation and 24-hours postpartum (p < 0.01, and p < 0.01, respectively). A gestating sow diet containing 13.82 MJ/kg ME and 10.5% CP can improve reproductive performance, litter performance, and colostrum quality.

• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.412-423
• /
• 2018

In this study, we investigated the distribution and habitat of Tscherskia triton from 2014 to 2016 in Jeju Island. Nine individuals of T. triton were observed and captured from four habitat sites. Most of the habitats were of the natural and rural type, and urban type coexisted in some of the areas. The natural type of habitat comprised of forests, shrubs, and grasslands. The habitat of T. triton ranged vertically from 102 m in lowland to 742 m in a mountainous area and was not observed in altitude over 1,000 m. Small brooks, dry streams or wetlands were found to be located nearby the habitat of T. triton. The T. triton was distributed mainly in areas with natural vegetation and artificial plantation in company with the upper story vegetation on the ground of intact or incomplete layer structure, or the area with the relatively large distribution of shrubs and long grassland. The presence of roads and forest paths in these habitats suggested that the T. triton can thrive in areas with human disturbance. The designation of Halla Mountain National Park in Jeju Island as a conservation area prevents damage or loss of the habitat due to any artificial development. However, frequent human disturbances occurring in grassland is tolerated by small mammals. Therefore, in order to help T. triton maintain a stable population density, it is essential that various types of the habitat should be conserved in the middle mountain areas and the grasslands in lowlands should be well protected.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.329-338
• /
• 2019

Suction of unsaturated bentonite buffers is a very important input parameter for hydro-mechanical performance assessment and design of an engineered barrier system. This study analyzed suction measurement techniques and constitutive models of unsaturated porous media reported in the literature, and suggested suction measurement techniques and constitutive models suitable for bentonite buffer in an HLW repository. The literature review showed the suction of bentonite buffer to be much higher than that of soil, as measured by total suction including matric suction and osmotic suction. The measurement methods (RH-Cell, RH-Cell/Sensor) using a relative humidity sensor were suitable for suction measurement of the bentonite buffer; the RH-Cell /Sensor method was more preferred in consideration of the temperature change due to radioactive decay heat and measurement time. Various water retention models of bentonite buffers have been proposed through experiments, but the van Genuchten model is mainly used as a constitutive model of hydro-mechanical performance assessment of unsaturated buffers. The water characteristic curve of bentonite buffers showed different tendencies according to bentonite type, dry density, temperature, salinity, sample state and hysteresis. Selection of water retention models and determination of model input parameters should consider the effects of these controlling factors so as to improve overall reliability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.556-563
• /
• 2019

Objective: This experiment was conducted to investigate the effect of reducing dietary metabolic energy (ME) and crude protein (CP) levels on growth performance, blood profiles, and nutrient digestibility in weaning pigs. Methods: A total of 240 crossbred pigs ($Duroc{\times}[Landrace{\times}Yorkshire]$) with an average body weight of $8.67{\pm}1.13kg$ were used for a 6-week feeding trial. Experimental pigs were allotted to a $2{\times}3$ factorial arrangement using a randomized complete block design. The first factor was two levels of dietary ME density (low ME level, 13.40 MJ/kg or high ME level, 13.82 MJ/kg) and the second factor was three dietary CP levels based on subdivision of early and late weaning phases (low CP level, 19.7%/16.9%; middle CP level, 21.7%/18.9%; or high CP level, 23.7%/20.9%). Results: Over the entire experimental period, there were no significant difference in body weight among groups, but a decrease in diet energy level was associated with an increase in average daily feed intake (p = 0.02) and decrease in gain-feed ratio (G:F) ratio (p<0.01). Decreased CP levels in the diet were associated with a linear increase in average daily gain (p<0.05) and quadratic increase in G:F ratio (p<0.05). In the early weaning period, blood urea nitrogen concentration tended to increase when ME in the diet decreased and decrease when CP level in the diet decreased (p = 0.09, p<0.01, respectively). Total protein concentration tended to increase when CP level was reduced (p = 0.08). In the late weaning period, blood urea nitrogen concentration decreased linearly as CP level decreased (p<0.01). The CP and crude fat digestibility decreased when ME was decreased by 0.42 MJ/kg (p = 0.05, p = 0.01, respectively). The CP digestibility increased linearly as CP level decreased (p = 0.01). Conclusion: A weaning pig diet containing high ME level (13.82 MJ/kg) and low CP level (19.7%/16.9%) can improve pig growth performance and nutrient digestibility.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.29-33
• /
• 2019

With shrinking form factor and improving performance of electronic packages, high input/output (I/O) density is considered as an important factor. Fan out wafer-level packaging (FO-WLP) has been paid great attention as an alternative. However, FO-WLP is vulnerable to warpage during its manufacturing process. Minimizing warpage is essential for controlling production yield, and in turn, package reliability. While many studies investigated the effect of process and design parameters on warpage using finite element analysis, they did not take uncertainty into consideration. As parameters, including material properties, chip positions, have uncertainty from the point of manufacturing view, the uncertainty should be considered to reduce the gap between the results from the field and the finite element analysis. This paper focuses on the effect of uncertainty of Young's modulus of chip on fan-out wafer level packaging warpage using finite element analysis. It is assumed that Young's modulus of each chip follows the normal distribution. Simulation results show that the uncertainty of Young's modulus affects the maximum von Mises stress. As a result, it is necessary to control the uncertainty of Young's modulus of silicon chip since the maximum von Mises stress is a parameter related to the package reliability.