• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.25-32
• /
• 2023

Constipation is the most common digestive disorder, and it occurs frequently in the early stages and affects the prognosis on rehabilitation stage in the patients with brain injury. The purpose of this study is to evaluate the bowel habits of brain-injured patients undergoing enteral nutrition immediately after admission to rehabilitation and transmission, and to investigate the effects of abdominal massage and lower extremity exercise. The study design is a quasi-experimental study to investigate the effect of a bowel care intervention (abdominal massage and lower extremity exercise) applicable to patients with brain lesions. As a result of the study, the number of bowel movements was significantly higher in the intervention group (p=.030), and the use of suppositories in the control group was statistically significantly higher than that in the intervention group (p=.004). The time of constipation relief was 1.73 days for the experimental group and 4.61 days for the control group, indicating that there was a difference in the time of constipation relief between the two groups (p<.001). Abdominal massage and lower extremity exercise were effective as nursing interventions to relieve constipation and prevent constipation in patients with brain injury from the early stage of rehabilitation.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.43-52
• /
• 2023

This study was conducted to examine the relationship of the COVID-19-related anxiety, self-efficacy, resilience, and professional competence of nurses working in hospitals where COVID-19 patients are hospitalized. Additionally, this study attempted to identify factors that affect the professional competence of nurses. Using a cross-sectional descriptive study design, an online survey of 120 nurses working at hospitals where COVID-19 patients were hospitalized was conducted between February 9 and February 19, 2021. Pearson's correlations were used to assess correlations between the main variables, and stepwise multiple regression was used to identify factors influencing professional competence. Results of the study showed that the professional competence of nurses was positively correlated with self-efficacy (r=.58, p<.001) and resilience (r=.56, p<.001). The correlation between professional competence and COVID-related anxiety was not significant (r=-.03, p=.766). Factors affecting professional competence included self-efficacy (β=.36, p=.004) and resilience (β=28, p=.021). The model explained approximately 35% of the variance in nurse professional competence (F=33.65, p<.001). To fully demonstrate the professional competence of nurses during the COVID-19 pandemic, institution-based programs should be developed and applied to improve their self-efficacy and resilience. In order to prevent the burnout of nurses in the longer-than-expected COVID-19 pandemic, efforts and policies at the nursing organization level are needed to systematically manage and monitor self-efficacy and resilience of nurses.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.189-196
• /
• 2023

As the manufacturing paradigm shifts, various collaborative robots are creating new markets. Demand for collaborative robots is increasing in all industries for the purpose of easy operation, productivity improvement, and replacement of manpower who do simple tasks compared to existing industrial robots. However, accidents frequently occur during work caused by collaborative robots in industrial sites, threatening the safety of workers. In order to construct an industrial site through robots in a human-centered environment, the safety of workers must be guaranteed, and there is a need to develop a collaborative robot guard system that provides reliable communication without the possibility of dispatch. It is necessary to double prevent accidents that occur within the working radius of cobots and reduce the risk of safety accidents through sensors and computer vision. We build a system based on OPC UA, an international protocol for communication with various industrial equipment, and propose a collaborative robot guard system through image analysis using ultrasonic sensors and CNN (Convolution Neural Network). The proposed system evaluates the possibility of robot control in an unsafe situation for a worker.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1253-1253
• /
• 2022

Although the construction industry is changing from a 2D-based to a 3D BIM-based management process, 2D drawings are still used as standards for permits and construction. For this reason, 2D deliverables extracted from 3D BIM are one of the essential achievements of BIM projects. However, due to technical and institutional problems that exist in practice, the process of extracting 2D deliverables from BIM requires additional work beyond generating 3D BIM models. In addition, the consistency of data between 3D BIM models and 2D deliverables is low, which is a major factor hindering work productivity in practice. To solve this problem, it is necessary to build BIM data that meets information requirements (IRs) for extracting 2D deliverables to minimize the amount of work of users and maximize the utilization of BIM data. However, despite this, the additional work that occurs in the BIM process for drawing creation is still a burden on BIM users. To solve this problem, the purpose of this study is to increase the productivity of the BIM process by automating the process of extracting 2D deliverables from BIM and securing data consistency between the BIM model and 2D deliverables. For this, an expert interview was conducted, and the requirements for automation of the process of extracting 2D deliverables from BIM were analyzed. Based on the requirements, the types of drawings and drawing expression elements that require automation of drawing generation in the design development stage were derived. Finally, the method for developing automation technology targeting elements that require automation was classified and analyzed, and the process for automatically extracting BIM-based 2D deliverables through templates and rule-based automation modules were derived. At this time, the automation module was developed as an add-on to Revit software, a representative BIM authoring tool, and 120 rule-based automation rulesets, and the combinations of these rulesets were used to automatically generate 2D deliverables from BIM. Through this, it was possible to automatically create about 80% of drawing expression elements, and it was possible to simplify the user's work process compared to the existing work. Through the automation process proposed in this study, it is expected that the productivity of extracting 2D deliverables from BIM will increase, thereby increasing the practical value of BIM utilization.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.123-135
• /
• 2023

In liberal SW education, nurturing student with creative problem-solving ability based on SW is considered important. The purpose of this study is to design SW education and to investigate the effects on students' computational thinking and creative problem solving abilities. This study designed classes in accordance with convergent project and the CT-CPS model and 38 undergraduate students have participated this study. The questionnaire survey was given to students and analyzed the effectiveness of class. The results of this study were as follows: Fitst, SW education significantly improved computational thinking and creative problem solving ability. Second, computational thinking improve significantly in high and low initial score group and creative problem solving improve significantly in low initial score group. However, creative problem solving ability did not improve significantly in high initial score group. Third, computational thinking improve significantly in all majors and creative problem solving improve significantly in college of natural science. However, creative problem solving ability did not improve significantly in college of humanities and social science. In examining the effects on students' computational thinking and creative problem-solving abilities and verify differences by pre-test and major, this study provides significance in expanding the understanding about the nature liberal SW education.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.33-39
• /
• 2022

This study aims to investigate the online class preference depending on students' gender and school level. To achieve this aim, the study conducted a survey on 4,803 elementary, middle, and high school students in 17 regions nationwide. The valid data of 4,524 were then analyzed using the Apriori algorithm to discern the associated patterns of the online class preference corresponding to their gender and school level. As a result, a total of 16 rules, including 7 from elementary school students, 4 from middle school students, and 5 from high school students were derived. To be specific, elementary school male students preferred software-based classes whereas elementary female students preferred maker-based classes. In the case of middle school, both male and female students preferred virtual experience-based classes. On the other hand, high school students had a higher preference for subject-specific lecture-based classes. The study findings can serve as empirical evidence for explaining the needs of online classes perceived by K-12 students. In addition, this study can be used as basic research to present and suggest areas of improvement for diversifying online classes. Future studies can further conduct in-depth analysis on the development of various online class activities and models, the design of online class platforms, and the female students' career motivation in the field of science and technology.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.449-455
• /
• 2022

The Colony of Selaginella involvens (Sw.) Spring in Sanyang-myeon, Mungyeong-si, can be divided into five types, and in the past, it was said that Selaginella involvens (Sw.) Spring formed colonies throughout the colony and grew naturally, but now it remains only in some sections. It was found that the Selaginella involvens (Sw.) Spring colony was damaged by artificial and natural factors, and as an artificial factor, the Selaginella involvens (Sw.) Spring was proven to be effective for medicinal and cremation, and many people were damaging the Selaginella involvens (Sw.) Spring colony without permission. Naturally, vines thrive and Selaginella involvens (Sw.) Spring die, and the reality is that the entire colony of Selaginella involvens (Sw.) Spring is in danger of being damaged if maintenance is not performed. On the other hand, there are sections that reproduce with symbiosis with some herbaceous plants, so it is necessary to plan and implement conservation strategies. In order to preserve the Selaginella involvens (Sw.) Spring colony, CCTV is needed to prevent artificial damage, and on the contrary, install facilities such as fences can easily burn up and create worse scenery, so it can preserve the good environment, restore recoverable areas, and install supplementary buffer zones.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.87-92
• /
• 2023

As times develop, information becomes more diverse and methods of obtaining it become more diverse. About 80% of the amount of information gained in life is acquired through the visual sense. However, visually impaired people have limited ability to interpret visual materials. That's why Braille, a text for the blind, appeared. However, the Braille decoding rate of the blind is only 5%, and as the demand of the blind who want various forms of platforms or materials increases over time, development and product production for the blind are taking place. An example of product production is braille books, which seem to have more disadvantages than advantages, and unlike non-disabled people, it is true that access to information is still very difficult. In this paper, we designed a CNN-based Braille conversion and voice output device to make it easier for visually impaired people to obtain information than conventional methods. The device aims to improve the quality of life by allowing books, text images, or handwritten images that are not made in Braille to be converted into Braille through camera recognition, and designing a function that can be converted into voice according to the needs of the blind.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.255-264
• /
• 2022

The conventional spot-type UV curing machine configures a collimator optical system using a plurality of lenses so that the light beam is incident through an optical cable. In order to increase the transmission light efficiency, a collimator optical system composed of three or more lenses is required, and accordingly, it is difficult to align the optical system, and it is difficult to implement the system compactly. In this study, a single TIR lens collimator that can realize the same level of spot diameter and light efficiency as the conventional collimator optical system composed of three lenses was designed. Through this, the light efficiency at the curing area with the minimum illuminance deviation was 33.2 %, which was similar to the performance of the reference collimator optical system, and the illuminance deviation on the curing area was 18.8 %, ensuring acceptable performance. In addition, by arranging a fly-eye lens with field flattening function at the front end of the condensing lens, the effective curing area diameter was reduced from 5.0 mm to 3.0 mm, enabling higher curing energy density to be realized. In addition, it was confirmed that the illuminance deviation can be greatly improved to a level of 14.4%.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.371-381
• /
• 2017

This paper presents a methodology for creating abstract animation based on the human movement theories originating from the work of dance theorist Rudolf von Laban. Laban Movement Analysis is a method and language for describing, visualizing, interpreting and documenting all varieties of human movement, and Choreutics is based on universal patterns of nature and of human as part of a universal design. Laban defines the space of movements in a profoundly dualistic way. Outwardly, his objective and scientific definitions provide a concrete base for generating human movements in computer graphics in terms of geometric and motion primitives such as points, lines, planes, polygons, linear and nonlinear movements. On the other hand, he also offers a system for understanding the subtle characteristics about the way a movement is dynamically done with respect to inner intention. Laban's interpretations of human motion can be utilized potentially in plastic arts and computer arts. Our work was inspired by those physical and psychological analyses and computer algorithms have been developed for creating abstract animation. We presented our computer animation works entitled "Choreography" in the exhibitions: a special section in "2015 Craft Trend Fair" and "Make Your Movement" held in the Korean Cultural Centre in UK, 2016. In this paper, we describe our ideas and methods for creating abstract object movements based on the Laban's motion representations.