• Journal of the Korean GEO-environmental Society
• /
• v.24 no.9
• /
• pp.33-40
• /
• 2023

The lateral load which is applied to the pile foundation supporting the superstructure during an earthquake is divided into the inertia force of the upper structure and the kinematic force of the ground. The inertia force and the kinematic force could cause failure to the pile foundation through different complex mechanisms. So it is necessary to predict and evaluate interaction of the ground-pile-structure properly for the seismic design of the foundation. The interaction is affected by the lateral behavior of the structure, the length of the pile, the boundary conditions of the head, and the relative density of the ground. Confining pressure and ground stiffness change accordingly when the relative density changes, and it results that the coefficient of subgrade reaction varies depending on each system. Horizontal bearing behavior and capacity of the pile foundation vary depending on lateral load condition and relative density of the sandy soil. Therefore, the 1g shaking table tests were conducted to confirm the effect of the relative density of the dried sandy soil to dynamic behavior of the group pile supporting the superstructure. The result shows that, as the relative density increases, maximum acceleration of the superstructure and the pile cap increases and decreases respectively, and the slope of the p-y curve of the pile decreases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.33-44
• /
• 2023

Wind power is one of the most efficient and reliable energy sources in the transition to a low-carbon society. In particular, offshore wind power provides a high-quality and stable wind resource compared to onshore wind power while both present a higher installed capacity than other renewables. In this paper, we present our new program, the X-WIND program well suitable for the assessment of the substructure of offshore wind turbines. We have developed this program to increase the usability of analysis programs for offshore wind energy substructures by addressing the shortcomings of existing programs. Unlike the existing programs which cannot solely perform the substructure analyses or lack pre-post processors, our X-WIND program can complete the assessment analysis for the offshore wind turbines alone. The X-WIND program is embedded in AutoCAD so that both design and analysis are performed on a single platform. This also performs static and dynamic analysis for wind, wave, and current loads, essential for offshore wind power structures, and includes pre/post processors for designs, mesh developments, graph plotting, and code checking. With this expertise, our program enhances the usability of analysis programs for offshore wind energy substructures, promoting convenience and efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.41-49
• /
• 2009

Flash memory has become increasingly requestion for the importance and the demand as a storage due to its low power consumption, cheap prices and large capacity medium. This research is to design a high performance flash memory structure for the substitution of a hard-disk by dynamic prefetching of aggressive spatial locality from the spatial smart buffer system. The proposed buffer system in a NAND flash memory consists of three parts, i.e., a fully associative victim buffer for temporal locality, a fully associative spatial buffer for spatial locality, and a dynamic fetching unit. We proposed new dynamic prefetching algorithm for aggressive spatial locality. That is to use the flash memory instead of the hard disk, the proposed flash system can achieve better performance gain by overcoming many drawbacks of the flash memory by the new structure and the new algorithm. According to the simulation results, compared with the smart buffer system, the average miss ratio is reduced about 26% for Mediabench applications. The average memory access times are improved about 35% for Mediabench applications, over 30% for Spec2000 applications.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.9-16
• /
• 2009

While the broadband network and multimedia technology are being developed, the commercial market of digital contents as well as using IPTV has been widely spreading. In this background, Time-Shift system is developed for requirement of multimedia. This system is independent of Time but is not independent of Place and Occasion. For solving these problems, in this paper, we propose the TPO(Time, Place, Occasion)-Shift system for mobile multimedia devices. The profile that can be applied to the mobile multimedia devices is much different from that of the setter-box. And general mobile multimedia devices could not have such large memories that is for multimedia data. So it is important to continuously store and manage those multimedia data in limited capacity with mobile device's profile. Therefore we compose the basket in a way using defined time unit and manage these baskets for effective buffer management. In addition. since the file name of basket is made up to include a basket's time information, we can make use of this time information as DTS(Decoding Time Stamp). When some multimedia content is converted to be available for portable multimedia devices, we are able to compose new formatted contents using such DTS information. Using basket based buffer systems, we can compose the contents by real time in mobile multimedia devices and save some memory. In order to see the system's real-time operation and performance, we implemented the proposed TPO-Shift system on the basis of mobile device, MS340. And setter-box are desisted by using directshow player under Windows Vista environment. As a result, we can find the usefulness and real-time operation of the proposed systems.

• Journal of Appropriate Technology
• /
• v.5 no.1
• /
• pp.18-24
• /
• 2019

Citarum river in West Java, Indonesia plays strategic roles for Jakarta metropolitan areas. Besides it provides major source of water supply such as domestics and drinking water including Jakarta, it also provides water for hundreds of industries through its cascade reservoirs. However, recently, Citarum river basin has been seriously suffering from water and groundwater pollution as well as the lowering-down of groundwater level due to the extreme use of water resources in dry season by domestic and industrial activities. This project objectives are design and installation of industrial wastewater treatment/recycle facilities to overcome the problem of water pollution and the lowering-down of groundwater level in Bandung. For these, cyclone type dissolved air flotation (DAF), CYFLOAT, was successfully installed as the appropriate technology for the target textile industry with 100 ton/day of capacity. The CYFLOAT system can remove the 96.8% of particulates, which are known as a critical factor to recycle the wastewater, within 40 min of residence time. Furthermore, The CYFLOAT system can reduce the operational cost and land use. The project was carried out in strong partnership with local institute including UNPAR, IBT, and PUSKIM for the sustainability of the technology to textile industry complex in Indonesia.

• Advanced Industrial SCIence
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2023

Since silicone rubber heaters are flexible, they can be directly attached or installed in objects to be heated even in flat, curved or three-dimensional shapes. Since the current heating method heats the entire object to be heated and raises it to a required temperature, ignoring areas or positions where heat is not required, partial intensive heating cannot be performed. When using multi-heating zones, rather than heating the entire object to be heated, only the parts that need heat are intensively heated according to the process, so it is possible to heat quickly by local location by applying different amounts of heat with a small amount of electric capacity to each place that needs heat, and heat energy can reduce. In this study, the temperature and heating time of the partially concentrated region in the multi-heating region structure are measured so that a uniform temperature or temperature difference occurs in the region requiring thermal fusion. In order to determine the optimal power density range and reduce capacitance, the safety of a silicon rubber heater manufactured with a multi-heating zone structure is investigated. If the silicon rubber heater is manufactured in a multi-heating method, the multi-intensive heating technology can be ideally applied to all heating processes.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.83-94
• /
• 2023

This study explored the effect of corporate field teacher and corporate education satisfaction on apprenticeship education satisfaction and student job competency development focusing on NCS job standards and industry-academia-integrated apprenticeship school project group. As a result of the study, satisfaction with corporate field teachers in the electrical, electronic, and food service sectors was found to have a positive influence on improving students' job competency, while satisfaction with corporate education was important in the management, accounting, office, and information and communication sectors. In the analysis by type of project group, the satisfaction of corporate field teachers in the joint practice type and industry-led type had a strong influence on improving job competency, but in the base school type and single school type, corporate education satisfaction had a greater influence on capacity improvement. Therefore, it is necessary to redefine the competencies of corporate field teachers and to establish and implement an industry-academic integrated apprenticeship school operation plan with the relationship between the type of project group and NCS job standard classification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.25-32
• /
• 2023

In this study, a double wall system is introduced, which was invented to simplify the complicated manufacturing process of the existing precast concrete (PC) double wall systems and to remove defects such as laitance that may occur during the production of concrete panels. An experimental study was conducted to investigate the tensile resisting capacity of the steel tube which is embedded in the precast concrete panel to keep the spacing between PC panels and to prevent damage of the PC panels during transportation and casting concrete onsite. The experiment was planned to determine the detail of effective steel tube connection considering the steel plate treatment method according to the formation of the opening, the presence of embedded concrete, and the reinforcement welding for additional dowel action as key variables. As a result, the ultimate tensile strength increased by 20-30% compared to the control specimen (ST) except for the steel tube specimen (ST_CP) which has steel plates bent inward at the end part of the steel tube. Since the specimen (ST_CON) filled with concrete inside the control specimen has no additional process and cost for the steel tube connections compared to the control specimen during the production of the developed double wall system, it is determined to be the appropriate detail of steel tube connection.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.247-262
• /
• 2019

This study involved the effects of home-visit program with cognitive-stimulating activities on cognitive function and memory self-efficacy of an elderly with dementia special rating(5rates). The study was conducted from February 11 to April 26, 2019 using a 65-year old woman residing in G Metropolitan City. The individual subject study used an A-B-A design. The subject performed activities that required thinking and resolving in order to stimulate both her body and cognition. The activities chosen were easily accessible to those having a form of mild dementia, rates 5 dementia special rating, and repetitively stimulated the subject's intellectual capacity in an attempt to increase her degraded cognitive functioning. Specifically, the activities exercised both short-term memory and recollection using familiar letters, numbers, and bodily movements frequently encountered in daily life. The program positively affected the subject's memory and concentration. In addition, the program was found to be feasible for home use by those with mild dementia, obviating the need to travel to a location like a welfare center. The author presents specific activities for stimulating cognition that can effectively intervene to positively influence the cognitive functioning and memory of those with rates 5 dementia special rating.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.23-28
• /
• 2023

Windows operating system generates various logs with timestamps. Timestamp tampering is an act of anti-forensics in which a suspect manipulates the timestamps of data related to a crime to conceal traces, making it difficult for analysts to reconstruct the situation of the incident. This can delay investigations or lead to the failure of obtaining crucial digital evidence. Therefore, various techniques have been developed to detect timestamp tampering. However, there is a limitation in detection if a suspect is aware of timestamp patterns and manipulates timestamps skillfully or alters system artifacts used in timestamp tampering detection. In this paper, a method is designed to detect changes in timestamps, even if a suspect alters the timestamp of a file on a storage device, it is challenging to do so with precision beyond millisecond order. In the proposed detection method, the first step involves verifying the timestamp of a file suspected of tampering to determine its write time. Subsequently, the confirmed time is compared with the file size recorded within that time, taking into consideration the performance of the storage device. Finally, the total capacity of files written at a specific time is calculated, and this is compared with the maximum input and output performance of the storage device to detect any potential file tampering.