• 제목/요약/키워드: deposition bed

검색결과 167건 처리시간 0.029초

전이금속이 담지된 세리아의 메탄 산화 반응에 대한 연구 (A Study of Methane Oxidation over Transition Metal (TM)/CeO2 (TM=Ni, Co, Cu, Fe))

  • 안기용;정용재;이종호
    • 한국수소및신에너지학회논문집
    • /
    • 제23권4호
    • /
    • pp.346-352
    • /
    • 2012
  • The properties of methane oxidation were studied in this research over transition metal containing $CeO_2$ (TM/$CeO_2$, TM=Ni, Co, Cu, Fe) with TM content of 5 wt. % at atmospheric pressure. The characteristics of catalysts were investigated by various characterization techniques, including XRD, GC, SEM and EPMA analyses. The catalytic tests were carried out in a fixed Rmix ratio of 1.5 ($CH_4/O_2$) in a fixed-bed reactor operating isothermally at atmospheric pressure. Only the Ni/$CeO_2$ catalysts showed syngas production above $400^{\circ}C$ via typical partial oxidation reaction whereas other catalysts induced complete oxidation resulting in the production of $CO_2$ and $H_2O$ in whole reaction temperature range. From the quantitative analysis on carbon deposition after catalytic tests, Cu/$CeO_2$ was found to show the highest resistance on carbon deposition. Therefore Cu can be proposed as an efficient catalyst element which can be combined with a conventional Ni-based SOFC anode to enhance the carbon tolerance.

광전자촉매 시스템(PECS)에 사용할 광촉매 금속판과 비드의 특성고찰 (Characterization of Titania plate and Nano Titania Coated Beads for Photoelectrocatalytic system(PECS))

  • 도영웅;하진욱
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2008년도 추계학술발표논문집
    • /
    • pp.354-357
    • /
    • 2008
  • 본 연구는 광전자촉매 시스템(PECS) 적용을 위하여 광촉매 금속판과 코팅비드를 제조하여 특성을 고찰하였다. 광촉매 물질의 회수가 용이하고, 실용화하기 위하여 티타늄 금속판을 $400^{\circ}C$에서 $700^{\circ}C$까지 $50^{\circ}C$에서 $100^{\circ}C$간격으로 토치를 사용하여 산화처리 하였으며, 비드의 경우 alumina, glass, silica gel beads에 TTIP([Ti$(OC_3H_7)_4$], Aldrich)을 전구체로 사용하여, 유동층 화학기상증착공정(Fluidized Bed Chemical Vapor Deposition, FB-CVD)으로 박막코팅을 하였다. 광촉매 금속판의 경우 산화처리 후 외관상태와 성분분석 시 최적조건은 $400^{\circ}C{\sim}500^{\circ}C$ 60분간 토치로 산화하였을 때였으며, 광촉매 코팅비드의 경우 silica gel beads가 본연의 다공구조를 나타내며 박막코팅이 되어, 상대적으로 alumina, glass beads에 비해 반응표면적이 크게 나타났다.

  • PDF

태양전지용 폴리실리콘 제조 (Preparation of Polysilicon for Solar Cells)

  • 김희영
    • Korean Chemical Engineering Research
    • /
    • 제46권1호
    • /
    • pp.37-49
    • /
    • 2008
  • 태양전지 기판의 원료인 폴리실리콘의 공급부족은 태양광발전산업의 비약적인 발전에 있어 최대 걸림돌이 되고 있다. 태양전지 제조에 충분한 순도로 폴리실리콘을 값싸게 제조할 수 있게 하는 공정기술의 개발은 태양광발전의 가격 경쟁력과 활용범위를 크게 증가시키는 중요한 계기가 될 수 있다. 본 총설에서는 태양전지용 폴리실리콘 제조를 위해 현재 이용 가능한 기술들을 정리해보고, 최근에 주목받고 있는 유동층 석출공정기술과 관련하여 응용범위 확대를 가로막고 있는 주요 기술적 장애요인에 대하여 중점적으로 소개하고자 한다.

입자 핵연료의 SiC/C 다층 도포층의 미세조직 및 극미세 경도 평가 (Microstructure and Nano-hardness of SiC/C Multi-coated Layers on a Particulate Nuclear Fuel)

  • 최용
    • 한국표면공학회지
    • /
    • 제52권6호
    • /
    • pp.321-325
    • /
    • 2019
  • Triso-type coating layers of silicon carbide and graphite on UO2 paticulate nuclear fuel were prepared by using fluidized bed type chemical vapor deposition and self-propagating high temperature synthesis methods to make a coated nuclear fuel of a power plant for hydrogen mass-production. The source and carrier gases were the mixture of methyltrichlorosilane and propane, and inert argon. Chemical analysis and microstructure observation showed that the coated layers were inner graphite, middle silicon carbide and outer graphite. The elastic modulus and nano-hardness of the silicon carbide layer were 503 [GPa] and 36 [GPa], respectively.

Three-dimensional Printing of Shape Memory Alloys

  • Carreno-Morelli, E.;Martinerie, S.;Bidaux, J.E.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.256-257
    • /
    • 2006
  • 3D printing of NiTi alloys has been successfully achieved. A novel printing process has been developed and used, which consists in selective deposition of a solvent on a granule bed. The granules are composed of metal powders and thermoplastic binder, which are mixed and sieved by conventional methods. A sound green strength is obtained after solvent evaporation. Sintered parts exhibit good density, proper phase composition and shape memory behaviour.

  • PDF

하상재료가 침식-퇴적 양상에 미치는 영향 분석 (Impact of Bed Material on Erosion-deposition Patterns)

  • 반채웅;이선민;최성욱
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.111-111
    • /
    • 2017
  • 본 연구에서는 2차원 하상변동 모형을 이용하여 sine 곡선형 개수로에서 하상재료의 분포가 침식-퇴적 양상에 미치는 영향을 분석하였다. 흐름 해석을 위하여 유한차분법을 이용하여 천수방정식을 해석하였다. 총유사량을 산정하기 위하여 Engelund-Hansen 공식을 이용하였으며, 하상변동을 모의하기 위하여 Exner 방정식을 해석하였다. 또한 모형을 sine 곡선형 수로의 실내실험에 적용하여 검증하였다. 하천의 지형형태학적 발달 과정을 체계적으로 분석하기 위하여, 이상화된 sine 곡선형 수로에 사행도, 폭-파장비, 폭-수심비 등의 인자를 고정시키고, 하상재료의 입경을 종속변수로 설정하여 수치실험을 수행하였다. 하상재료의 입경을 변화시켜 가며 흐름과 하상변동 결과를 비교하고 분석하였다.

  • PDF

Reverse Engineering and 3D Printing of Turbine Housing for Tank Diesel Turbo Engine

  • Chul-Kyu Jin
    • 한국산업융합학회 논문집
    • /
    • 제26권6_1호
    • /
    • pp.977-983
    • /
    • 2023
  • The tank uses a twin turbo diesel engine equipped with two turbocharger systems for high output. The main component of the turbocharger system is the turbine housing through which the exhaust flows. Turbine housing is manufactured through a sand casting process, taking into account the shape and material characteristics according to the environmental conditions in which it is used. Currently, turbine housing is imported, and local production is necessary. In this study, basic research was conducted to localize the turbine housing of a tank diesel turbo engine. Reverse engineering and finite element analysis of the imported turbine housing were performed. The prototype of the turbine housing was printed using FDM and PBF 3D printers. The prototype of the turbine housing printed with an FDM 3D printer has an overall appearance similar to 3D modeling, but the printed surface of the whorl part is rough. The prototype printed with the PBF 3D printer is completely identical to the 3D modeling, including the whorl part.

하천 횡단구조물에 의한 하상변동 예측 - 행정중심복합도시 주요 하천구간을 중심으로 - (A Riverbed Change Prediction by River-Crossing Structure -Focused on the Major River Reaches of the Multifunctional Administrative City-)

  • 연규성;정상만;윤찬영;이주헌;신광섭
    • 한국방재학회 논문집
    • /
    • 제9권1호
    • /
    • pp.107-113
    • /
    • 2009
  • 본 연구에서는 행정중심복합도시 예정 및 주변지역의 금강과 미호천 일부 구간을 대상으로 하상변동의 실태분석과 수위유지 시설 설치에 따른 장기 예측을 실시하였다. 1988년, 2002년 및 2007년의 횡단자료를 이용하여 대상구간의 종방향 하상변동 실태를 분석한 결과 금강과 미호천 구간 모두 2007년 최심하상고는 1988년에 비해 심한 저하가 발생된 반면 2002년에 비해서는 미소한 변화가 발생되었다. 수위유지시설 설치에 따른 하상변동 장기 예측을 수행하기 위하여 본 연구에서는 1차원 모형인 HEC-RAS 4.0 모형을 적용하였다. 고정상 모형의 수행을 통하여 수면고를 보정(calibration)하였으며, 1988년과 2002년 횡단자료를 사용하여 이동상 모형에서의 검정(verification)을 실시하였다. 2007년을 기준으로 하여 2017년까지 향후 10년간 수위유지시설의 설치 높이에 따른 시나리오별 하상변동을 예측한 결과 미호천 대상구간은 그 영향이 미미하였으나 금강 대상구간은 수위유지시설의 높이가 높을수록 많은 영향을 미치는 것으로 나타났다. 수위유지시설의 설치 높이가 7 m일 경우 금강 대상구간은 설치하지 않을 경우보다 미호천합류점 상류부근에서 1.59 m의 퇴적이 발생할 것으로 모의되었으며, 수위유지시설 하류부근에서 1.98 m의 침식이 발생할 것으로 모의되었다.

베인 형태에 따른 하상세굴 저감 효과에 관한 연구 (The Study for Reduction Effect of Riverbed Scour due to Shape of Vanes)

  • 노해민;이호진;김성덕
    • 한국방재안전학회논문집
    • /
    • 제16권2호
    • /
    • pp.57-63
    • /
    • 2023
  • 기후변화로 인하여 발생하는 집중호우와 슈퍼태풍은 우리나라에서 많은 피해를 야기한다. 이러한 피해를 저감하기 위해서 다양한 형태의 하천정비사업이 추진되고 있으나, 홍수기와 갈수기가 뚜렷한 우리나라에서는 하천 균형을 유지하기가 어렵다. 특히, 하천정비 사업으로 설치된 하천구조물은 홍수기에 구조물 및 그 기초의 세굴이 발생되고 하상 변화 등 다양한 문제를 일으키고 있다. 이러한 하상세굴을 저감하기 위하여 하천의 만곡부에 다양한 베인이 많이 설치되며, 베인의 배치와 크기, 모양에 따라서 다양한 하상세굴 저감 효과가 나타난다. 베인은 원심력에 의해 발생하는 2차 흐름과 반대 방향으로 2차 흐름을 다시 생성함으로써 외측 하상 주변의 세굴이 감소하고 퇴적이 촉진된다. 본 연구의 이론은 질량보존법칙을 만족하는 연속방정식과 운동량 보존을 만족하는 운동량방정식을 적용한 지배방정식을 이용하고, 다양한 조건 하에서 베인의 영향을 조사하기 위해 설계 요인에 따라 전체 평균 유속 변화율을 측정한다. 사다리꼴 베인과 사각형 베인 모두에서 평균유속과 횡단면 유속이 모두 감소하였고, 이는 베인 설치로 인해서 원심력을 갖고 유하하는 하천유속이 방해를 받아 유속이 저감되기 때문이다. 또한, 하천흐름 방향에 수직으로 또는 경사적으로 설치된 베인은 원심력에 의해 발생하는 2차흐름의 역방향으로 2차흐름을 발생시켜 원심력 2차흐름의 상쇄를 나타내기 때문에 베인의 효과가 나타난다.

옥천대(沃川帶) 우라늄광층(鑛層)의 구조규제(構造規制) 및 지구화학적(地球化學的) 특성연구(特性硏究) (Lithologic and Structural Controls and Geochemistry of Uranium Deposition in the Ogcheon Black-Slate Formation)

  • 이대성;윤석규;이종혁;김정택
    • 자원환경지질
    • /
    • 제19권spc호
    • /
    • pp.19-41
    • /
    • 1986
  • Structural, radioactive, petrological, petrochemical, mineralogical and stable isotopic study as well as the review of previous studies of the uranium-bearing slates in the Ogcheon sequence were carried out to examine the lithological and structural controls, and geochemical environment in the uranium deposition in the sequence. And the study was extended to the coal-bearing formation (Jangseong Series-Permian) to compare the geochemical and sedimentologic aspects of uranium chemistry between Ogcheon and Hambaegsan areas. The results obtained are as follows: 1. The uranium mineralization occurs in the carbonaceous black slates of the middle to lower Guryongsan formation and its equivalents in the Ogcheon sequence. In general, two or three uranium-bearing carbonaceous beds are found with about 1 to 1.5km stratigraphic interval and they extend from Chungju to Jinsan for 90km in distance, with intermittent igneous intrusions and structural Jisturbances. Average thickness of the beds ranges from 20 to 1,500m. 2. These carbonaceous slate beds were folded by a strong $F_1$-fold and were refolded by subsequent $F_1$-fold, nearly co-axial with the $F_1$, resulting in a repeated occurrence of similar slate. The carbonaceous beds were swelled in hing zones and were shrinked or thined out in limb by the these foldings. Minor faulting and brecciation of the carbonaceous beds were followed causing metamorphism of these beds and secondary migration and alteration of uranium minerals and their close associations. 3. Uranium-rich zones with high radioactive anomalies are found in Chungju, Deogpyong-Yongyuri, MiwonBoun, Daejeon-Geumsan areas in the range of 500~3,700 cps (corresponds to 0.017~0.087%U). These zones continue along strike of the beds for several tens to a few hundred meters but also discontinue with swelling and pinches at places that should be analogously developed toward underground in their vertical extentions. The drilling surveyings in those area, more than 120 holes, indicate that the depth-frequency to uranium rich bed ranging 40~160 meter is greater. 4. The features that higher radioactive anomalies occur particularly from the carbonaceous beds among the argillaceous lithologic units, are well demonstrated on the cross sections of the lithology and radioactive values of the major uranium deposits in the Ogcheon zone. However, one anomalous radioactive zone is found in a l:ornfels bed in Samgoe, near Daejeon city. This is interpreted as a thermal metamorphic effect by which original uranium contents in the underlying black slate were migrated into the hornfels bed. 5. Principal minerals of the uranium-bearing black slates are quartz, sericite, biotite and chlorite, and as to chemical composition of the black slates, $Al_2O_3$ contents appear to be much lower than the average values by its clarke suggesting that the Changri basin has rather proximal to its source area. 6. The uranium-bearing carbonaceous beds contain minor amounts of phosphorite minerals, pyrite, pyrrhotite and other sulfides but not contain iron oxides. Vanadium. Molybdenum, Barium, Nickel, Zirconium, Lead, Cromium and fixed Carbon, and some other heavy metals appear to be positive by correlative with uranium in their concentrations, suggesting a possibility of their genetic relationships. The estimated pH and Eh of the slate suggests an euxenic marine to organic-rich saline water environment during uranium was deposited in the middle part of Ogcheon zone. 7. The Carboniferous shale of Jangseong Series(Sadong Series) of Permian in Hambaegsan area having low radioactivity and in fluvial to beach deposits is entirely different in geochemical property and depositional environment from the middle part of Ogcheon zone, so-called "Pibanryong-Type Ogcheon Zone". 8. Synthesizing various data obtained by several aspects of research on uranium mineralization in the studied sequence, it is concluded that the processes of uranium deposition were incorporated with rich organic precipitation by which soluble uranyl ions, $U{_2}^{+{+}}$ were organochemically complexed and carried down to the pre-Ogcheon sea bottoms formed in transitional environment, from Red Sea type basin to Black Sea type basin. Decomposition of the organic matter under reducing conditions to hydrogen sulfide, which reduced the $UO{_2}^{+2}$ ions to the insoluble uranium dioxide($UO_2$), on the other side the heavy metals are precipitated as sulfides. 9. The EPMA study on the identification of uraninite and others and the genetic interpretation of uranium bearing slates by isotopic values of this work are given separately by Yun, S. in 1984.

  • PDF