• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.63-68
• /
• 2016

This research investigates the deployment time of an active hood lift system(AHLS) activated a gunpowder actuator for the passenger vehicle. The deployment time of the system is investigated by changing the principal design parameters of the system. In order to achieve this goal, after introducing the geometric structure and operating principle of the AHLS, the dynamic equations of the system are formulated for deploying motion. Subsequently, using the dynamic equations, the deployment time of the system is determined by changing several geometric design parameters such as location of actuator. It is then identified which design parameters are main factors to affect the deployment time of AHLS.

• 한국인터넷방송통신학회논문지
• /
• 제10권6호
• /
• pp.55-62
• /
• 2010

모니터링 시스템은 특정 영역에서 발생하는 사건을 신속히 보고하여 적절한 대응을 할 수 있도록 해주는 시스템을 말한다. 로봇화된 산업 생산라인의 공정 모니터링에서부터 산불감지, 침입탐지, 스마트그리드, 환경오염 경보에 이르기 까지 다양한 산업군에서 널리 사용되고 있으며 무선통신의 발달과 저가의 센서를 활용가능하게 되면서 센서네트워크로 대표되는 지능형 또는 스마트 모니터링 시스템으로 발전하게 되었다. 모니터링 시스템의 목적이 다양하고 구축비용, 구성 방식, 구축 후 효과 등 많은 부분이 센서 또는 모니터링 디바이스가 설치된 장소에 영향을 받게 되지만 제한된 방식에 대해서만 배치 기법에 대해 관심을 받아 왔다. 모니터링 시스템의 종류에 따라 활용할 수 있는 다양한 방식의 배치 기법을 소개하고 배치 시의 성능을 객관적으로 비교할 수 있는 성능척도들 또한 소개하여 기존의 모니터링 시스템을 평가하고 개선할 수 있는 지점을 확인가능하게 하며 모니터링 시스템 설계 시에도 활용가능하다. 성능 척도는 배치과정에서의 효율성과 배치된 이후의 모니터링 시스템의 유용성을 평가할 수 있어야 한다. 배치과정에서의 효율성은 배치에 소요된 시간, 에너지 소모량, 비용, 안전성, 센서노드 손상율, 확장성(Scalability) 등이며 배치 이후의 모니터링 시스템의 유용성은 목표지역(ROI) 커버리지(Coverage), 연결성(Connectivity), 균일도(Uniformity), 목표 밀도(target density) 유사성, 단위기간 에너지 소모율 등이다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.214-217
• /
• 2013

Advancements in automobile industries and the communication technologies caused VANET (Vehicular Ad Hoc NETwork) to evolve to VANET-based clouds before its deployment. It is more likely that VANET clouds will replace the traditional VANET in the deployment phase. It is to be noted that an abrupt deployment is out of question because it would require mass of resources and money to do so; instead incremental deployment is more ideal. In this paper, we aim at the incremental deployment phase of VANET clouds and focus on the well-established public transport networks. Data aggregation is one of the essential aspects in traditional VANET and has been researched for quite long time. However the previously proposed schemes are still controversial. Keeping in mind the time and space prediction of public buses, we leverage these buses as potential aggregators and MG (Mobile Gateways) in VANET clouds. Buses gather cooperative whereabouts information from neighbors, aggregate that information, disseminate it to the neighbor MGs and also send it to the cloud for storage and for services exchange. In our proposed scheme, we believe that the dissemination will be effective and cover most of the urban area since at any instant of time; buses cover most part of the urban areas. Besides, the effective transmission range is higher due to tall buses.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권5호
• /
• pp.1708-1734
• /
• 2022

In the development of logistics system, the breakthrough of important technologies such as technology platform for logistics information management and control is the key content of the study. Based on Javascript and JQuery, the logistics system realizes real-time monitoring, collection of historical status data, statistical analysis and display, intelligent recommendation and other functions. In order to strengthen the cooperation of warehouse storage, enhance the utilization rate of resources, and achieve the purpose of real-time and visual supervision of transportation equipment and cargo tracking, this paper studies the VNF dynamic deployment and SFC routing problem in the network load change scenario based on the logistics system. The BIP model is used to model the VNF dynamic deployment and routing problem. The optimization objective is to minimize the total cost overhead generated by each SFCR. Furthermore, the application of the SFC mapping algorithm in the routing topology solving problem is proposed. Based on the concept of relative cost and the idea of topology transformation, the SFC-map algorithm can efficiently complete the dynamic deployment of VNF and the routing calculation of SFC by using multi-layer graph. In the simulation platform based on the logistics system, the proposed algorithm is compared with VNF-DRA algorithm and Provision Traffic algorithm in the network receiving rate, throughput, path end-to-end delay, deployment number, running time and utilization rate. According to the test results, it is verified that the test results of the optimization algorithm in this paper are obviously improved compared with the comparison method, and it has higher practical application and promotion value.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.265-269
• /
• 2016

In this research, the performances of active hood lift system(AHLS) are investigated according to the structural improvement through the experimental test. After introducing the working principle of the AHLS activated by a gunpowder actuator, the structural problems that cause the inefficiencies in the actuation are analyzed to reduce the deployment time of system. Sequentially, the improved structural model is proposed base on the analysis. The deployment time of AHLS are evaluated by the experimental test, and it has been identified that the improved model can provide a faster deploying time of AHLS.

• Clinical Endoscopy
• /
• 제56권2호
• /
• pp.135-142
• /
• 2023

Endoscopic biliary drainage strategies for managing unresectable malignant hilar biliary obstruction differ in terms of stent type, drainage area, and deployment method. However, the optimal endoscopic drainage strategy remains unclear. Uncovered self-expandable metal stents (SEMS) are the preferred type because of their higher functional success rate, longer time to recurrent biliary obstruction (RBO), and fewer cases of reintervention than plastic stents (PS). Other PS subtypes and covered SEMS, which feature a longer time to RBO than PS, can be removed during reintervention for RBO. Bilateral SEMS placement is associated with a longer time to RBO and a longer survival time than unilateral SEMS placement. Unilateral drainage is acceptable if a drainage volume of greater than 50% of the total liver volume can be achieved. In terms of deployment method, no differences were observed in clinical outcomes between side-by-side (SBS) and stent-in-stent deployment. Simultaneous SBS boasts a shorter procedure time and higher technical success rate than sequential SBS. This review of previous studies aimed to clarify the optimal endoscopic biliary drainage strategy for unresectable malignant hilar biliary obstruction.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권4호
• /
• pp.12-20
• /
• 2024

Diffusive gradients in thin films (DGT) are passive sampling devices used to determine the time-weighted average concentrations (TWAC) of contaminants. To ensure accurate performance in groundwater, it is crucial to identify environmental characteristics and maintain optimal operational conditions. This study examined the deployment time required to reach effective capacity, the thickness of the diffusive boundary layer (DBL) under stagnant water conditions, and biofilm formation on the DGT surface using groundwater samples. When using DGT with Chelex gel (A=3.14 cm²), the effective capacity was 0.7 ㎍ for Cd and 250 ㎍ for Zn, with a deployment time of 24 h. Lower Cd accumulation was due to the competition effect of coexisting ions. The DBL thickness under stagnant conditions was 0.074 cm, 93% of the diffusion gel's thickness (0.08 cm). Neglecting DBL thickness in TWAC calculations led to a 79% decrease in the determined concentration. No biofouling was observed during the 28-d DGT deployment in groundwater. In conclusion, it is essential to consider the appropriate deployment time, DBL thickness, and biofilm formation to ensure accurate DGT performance in determining contaminant levels in groundwater.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.245-250
• /
• 2008

For simulation of a wing unfolding motion for the various aerodynamic conditions, equation governing unfolding motion and moments applying to the unfolding wing were modelled. Aerodynamic roll moment consists of the static roll moment and the damping moment, which were obtained through wind tunnel tests and numerical analyses respectively. Panel method was used to compute the roll damping coefficient with twisted wing, whose deflection angle was equivalent to angle of attack due to the deployment motion. Roll damping coefficient is a function of angle of attack, sideslip angle, and deployment angle but not of angular velocity of deployment. Simulation with aerodynamic damping model gave more similar deployment time compared to wing deployment test results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.245-250
• /
• 2008

For simulation of a wing unfolding motion for the various aerodynamic conditions, equation governing unfolding motion and moments applying to the unfolding wing were modelled. Aerodynamic roll moment consists of the static roll moment and the damping moment, which were obtained through wind tunnel tests and numerical analyses respectively. Panel method was used to compute the roll damping coefficient with twisted wing, whose deflection angle was equivalent to angle of attack due to the deployment motion. Roll damping coefficient is a function of angle of attack, sideslip angle, and deployment angle but not of angular velocity of deployment. Simulation with aerodynamic damping model gave more similar deployment time compared to wing deployment test results.

• 유통과학연구
• /
• 제17권12호
• /
• pp.63-70
• /
• 2019

Purpose: This study was to propose effective deployment of automatic external defibrillators (AEDs) installed at general supermarkets. Research design, data, and methodology : We conducted interview and data surveys on 72 large distributors in Seoul and Gyeonggi province in South Korea. The content of this survey was consisted of general status on the general supermarkets, AED deployment and management regarding public access defibrillation (PAD). G^⁎Power (v 3.1.9.4; Universität Kiel, Kiel, Germany) was also used to analyze statistical power. Radius and actual distance, radius and retrieval time were compared by t-test at α=.05. respectively. Results : Difference between the radius (102.7 meters) and the actual distance (187.8 meters) was 85.1m, it had statistically significant difference (p<.001). The actual distance was longer compared to the radius distance. Difference between the radius (114.1 seconds) and the retrieval time (208.7 seconds) was 94.6s, it had statistically significant difference (p<.001). The retrieval time took longer compared to the radius time as well. Conclusions : The finding shows that only 45.9% of the general supermarkets are satisfied with the actual AED coverage within 3 minutes. This needs to enhance AED deployment to reduce defibrillation time and AED management to boost application in South Korea.