• Title/Summary/Keyword: dependency structure matrix

Search Result 15, Processing Time 0.018 seconds

Representation of Dynamic Stiffness Matrix with Orthogonal Polynomials (직교다항식을 이용한 구조계의 축약된 동강성행렬 표현)

  • 양경택;최계식
    • Computational Structural Engineering
    • /
    • v.6 no.2
    • /
    • pp.95-102
    • /
    • 1993
  • A modeling method is described to provide a smaller structural dynamic model which can be used to compare finite element model of a structure with its experimental counterpart. A structural dynamic model is assumed to be represented by dynamic stiffness matrix. To validate a finite element model, it is often necessary to condense a large degrees of freedom (dofs) to a relatively small number of dofs. For these purpose, static reduction techniques are widely used. However, errors in these techniques are caused by neglecting frequency dependent terms in the functions relating slave dofs and master dofs. An alternative method is proposed in this paper in which the frequency dependent terms are considered by expressing the reduced dynamic stiffness matrix with orthogonal polynomials. The reduced model has finally a minimum set of dofs, such as sensors and excitation points and it is under the same condition as the physical system. It is proposed that the reduced model can be derived from finite element model. The procedure is applied to example structure and the results are discussed.

  • PDF

Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy - (산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)-)

  • Lee, Sung-Yoon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.2 no.4
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

The geography of external control in Korean manufacturing industry (한국제조업에서의 외부통제에 관한 공간적 분석)

  • ;Beck, Yeong-Ki
    • Journal of the Korean Geographical Society
    • /
    • v.30 no.2
    • /
    • pp.146-168
    • /
    • 1995
  • problems involved in defining and identifying it. However, data on ownership of business establishments may be useful and one of the best alternatives for this empirical research because of use of limited information about control This study examines the spatial patterns of external control in the Korean manufacturing activities between 1986 and 1992. Using the data on ownership iinkages of multilocational firms between 15 administrative areas, it was possible to construct a matrix of organizational control in terms of the number of establishments. The control matrix was disaggregated by three types of manufacturing industries according to the capital and labor requirements of production processes used in. On the basis of the disaggregated control matrix, a series of measures were calculated for investigating the magnitude and direction of control as well as the external dependency. In the past decades Korean industrialization development has risen at a rapid pace, deepening integration into the world economy, together with the continuing growth of the large industrial firms. The expanded scale of large firms led to a spatial separation of production from control, Increasing branch plants in the nation. But recent important changes have occurred in the spatial organization of production by technological development, increasing international competition, and changing local labor markets. These changes have forced firms to reorganize their production structures, resulting in changes of the organizational structures in certain industries and regions. In this context the empirical analysis revealed the following principal trends. In general term, the geography of corporate control in Korea is marked by a twofold pattern of concentration and dispersion. The dominance of Seoul as a major command and control center has been evident over the period, though its overall share of allexternally controlled establishments has decreased from 88% to 79%. And the substantial amount of external control from Seoul has concentrated to the Kyongki and Southeast regions which are well-developed industrial areas. But Seoul's corporate ownership links tend to streteh across the country to the less-developed regions, most of which have shown a significant increase of external dependency during the period 1986-1992. At the same time, a geographic dispersion of corporate control is taking place as Kyongki province and Pusan are developing as new increasingly important command and control reaions. Though these two resions contain a number of branch plants controlled from other locations, they may be increasingly attractive as a headquarters location with increasing locally owned establishments. The geographical patterns of external control observable in each of three types of manufacturing industries were examined in order to distinguish the changing spatial structures of organizational control with respect to the characteristics of the production processes. Labor intensive manufacturing with unskilled iabor experienced the strongest external pressure from foreign competition and a lack of low cost labor. The high pressure expected not only to disinte-grate the production process but also led to location of production facilities in areas of cheap labor. The linkages of control between Seoul and the less-developed regions have slightly increased, while the external dependency of the industrialized regions might be reduced from the tendency of organizational disintegration. Capita1 intensive manufacturing operates under high entry and exit barriers due to capital intensity. The need to increase scale economies ied to an even stronger economic and spatial oncentration of control. The strong geographical oncentration of control might be influenced by orporate and organizational scale economies rather than by locational advantages. Other sectors experience with respect to branch plants of multilocational firms. The policy implications of the increase of external dependency in less-developed regions may be negative because of the very share of unskilled workers and lack of autonomy in decision making. The strong growth of the national economy and a scarcity of labor in core areas have been important factors in this regional decentralization of industries to less-developed regions. But the rather gloomy prospects of the economic growth in the near future could prevent the further industrialization of less-developed areas. A major rethinking of regional policy would have to take place towards a need for a regional policy actively favoring indigenous establishments.

  • PDF

Analysis of Consciousness Structure of Social Workers for the Casual Factors of Elderly Abuse Using FSM (FSM을 이용한 노인학대 발생요인에 대한 사회복지사의 의식구조 분석)

  • Jang, Yun-Jeong
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.26 no.6
    • /
    • pp.458-463
    • /
    • 2016
  • In this paper, the fuzzy structure model for the consciousness structure of social workers related to the elder abuse factors was derived and analyzed. The characteristics of the model was obtained as follows. First, the elder abuse behavior at the top layer was related to the attitude of the elderly and the work overload of social workers. Second, the attitude of the elderly and the work overload of social workers at the middle layer were related to the personality of social worker, the physical and mental dependency of client, and the personality of client. Third, the personality of social worker, the knowledge of the elderly, the personality of client, and the physical and psychological dependence of the client affected directly the elder abuse behavior without going through the middle layer. Fourth, the work overload of social workers at the middle layer was affected the attitude of the elderly. Finally, the age of social workers, the working image, the job training, and provision of punishment to the social workers were the isolated layer, in which the relationship between the elder abuse behavior and related factors was not found.

Determination of Degree of Hydration, Temperature and Moisture Distributions in Early-age Concrete (초기재령 콘크리트의 수화도와 온도 및 습도분포 해석)

  • 차수원;오병환;이형준
    • Journal of the Korea Concrete Institute
    • /
    • v.14 no.6
    • /
    • pp.813-822
    • /
    • 2002
  • The purpose of the present study is first to refine the mathematical material models for moisture and temperature distributions in early-age concrete and then to incorporate those models into finite element procedure. The three dimensional finite element program developed in the present study can determine the degree of hydration, temperature and moisture distribution in hardening concrete. It is assumed that temperature and humidity fields are fully uncoupled and only the degree of hydration is coupled with two state variables. Mathematical formulation of degree of hydration Is based on the combination of three rate functions of reaction. The effect of moisture condition as well as temperature on the rate of reaction is considered in the degree of hydration model. In moisture transfer, diffusion coefficient is strongly dependent on the moisture content in pore system. Many existing models describe this phenomenon according to the composition of mixture, especially water to cement ratio, but do not consider the age dependency. Microstructure is changing with the hydration and thus transport coefficients at early ages are significantly higher because the pore structure in the cement matrix is more open. The moisture capacity and sink are derived from age-dependent desorption isotherm. Prediction of a moisture sink due to the hydration process, i.e. self-desiccation, is related to autogenous shrinkage, which may cause early-age cracking in high strength and high performance concrete. The realistic models and finite element program developed in this study provide fairly good results on the temperature and moisture distribution for early-age concrete and correlate very well with actual test data.