• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.71-83
• /
• 1984

The purpose of this study was to evaluate the transmission spectrum of the set calcium hydroxide dental cement (Dycal, L.D. Caulk Co. Milford, Del.) Cement was prepared for A T R spectra at a low powder-to-liquid ratio of 3.0gm/ml in order to retard the reaction and facilitate the manipulation of loading the cement into the cell. Spectra were recorded on an I R Spectrophotometer (MX-1, FT) at an agle of incidence of 55. The A T R cell was a RIIc Model TR5 with a hemisperical KRS-5 (Thallium-Bromide-Iodide). A spectrum was recorded within 3 minutes. Further spectra were recorded after 5,10,30 minutes and 1,5,24, 72 hours. The results were as follows; 1. The setting reaction between acid paste and base past would take place fastly within 10 minutes after mix, and that would be slow until 72 hours after mix. 2. In the set cements, some methyl salicylate and calcium hydroxide remained unreacted until 72 hours after mix. 3. The setting reaction and the reaction rate occuring at the surface and in the bulk cements were similar. 4. The chelates were bound together between calcium hydroxide and methyl salicylate.

• The Journal of the Korean dental association
• /
• v.58 no.1
• /
• pp.19-26
• /
• 2019

Purpose: The purpose of this study is to compare the adhesion of Candida albicans according to build angle in 3D printing denture base resin. Methods: The 3D printing was performed by setting the build angle of the disk type specimen designed by CAD program at 0 degree, 30 degrees, 60 degrees, and 90 degrees. Surface roughness was measured using a non-contact 3D microsurface profiler. The specimens were incubated in Candida albicans suspension for 24 hours. The attached Candida albicans were detached by cell scraper. The suspension of detached C. albicans was serially diluted and plated on Trypticase soy broth. After 48 hours of incubation, total colony forming unit was counted. Results: There was no significant difference in surface roughness(Sa) between the test groups, but the interlayer boundary was observed. There was no statistically significant difference in total colony forming units of Candida albicans between the test groups. Conclusion: There was no difference in the average surface roughness and adhesion of Candida albicans between the specimens. It is considered that the setting of the build angle should be set considering the accuracy or strength rather than the roughness of the surface.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.535-546
• /
• 2018

Objectives: This study is to assess the correlation of the changes in dental health-related quality of life before, during, and after orthodontic treatments in the patients. Methods: The self-administered survey was conducted in the patients who completed orthodontic treatments living in Seoul and metropolitan areas using Oral Impact on Daily Performances (OIDP) to identify the relevant factors. Data were analyzed with descriptive statistics of variables, independent t-test, one way ANOVA, and multiple regression analysis. Results: From observations of OIDP before, during, and after orthodontic treatment, discomfort associated with three factors including physical, psychological and social ones showed the statistically significant increases during orthodontic treatment than before the treatment; whereas, it was dramatically dropped afterward. Multiple regression analysis to find the influential factors of satisfaction level on orthodontic treatment by setting before, during, and after OIDP as independent variables and satisfaction on orthodontic treatment as a dependent variable revealed that OIDP before orthodontic treatment and after orthodontic treatment significantly affected satisfaction on orthodontic treatment. Conclusions: The above analysis on the change in patients' dental health-related quality of life showed that the quality of life improved after the orthodontic treatment. Accordingly, patients' quality of life and satisfaction level on orthodontic treatment are expected to improve if they strive to maintain healthy dental health through orthodontic treatment.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.2
• /
• pp.61-67
• /
• 2014

The aim of this study was to analyze the clinical characteristics of patients with cognitive and behavioral impairments receiving dental treatment under general anesthesia (GA-dental treatment). From August 2007 to April 2014, information was collected from 475 patients who received GA-dental treatment at the Clinic for Persons with Disabilities, Seoul National University Dental Hospital. The demographic factors (gender, age, disability, medication, GA history, residency type, caregiver, meal type, oral hygiene maintenance, and cooperation level) and dental status (operating duration, DMFT, malocclusion, periodontal disease, tooth defect, and treatment protocol) of the patients were evaluated. DMFT and malocclusion levels were compared among the patients with ANOVA and Sheffe's post-hoc test, and chi-square test, respectively. The correlation between the demographic characteristics and dental status of the patients were analyzed with the Pearson's correction test. The mean age of the patients was 27.1 (7 - 83) years and they had intellectual disabilities (55.4%), developmental disorders (17.9%), brain disorders (16.6%), neurocognitive disorders (4.6%), or others (5.5%). The mean DMFT (DT) was 8.6 (5.2) with a significant difference among the disability types (p<0.05). The incidence of malocclusion was higher in patients with intellectual disabilities and brain disorders than in the other types (p<0.05). The operation time ($191.4{\pm}91.2min$) was correlated with decayed or endodontically-treated teeth (p<0.05). Special needs patients requiring GA-dental treatment showed unfavorable oral conditions. Dental practitioners experience time restrictions and additional costs under a GA setting. Treatment planning and decision-making can be efficiently facilitated by evaluating the clinical characteristics of the patients.

• The Journal of Korean Society for School & Community Health Education
• /
• v.18 no.2
• /
• pp.97-105
• /
• 2017

Objectives: The purpose of this study is to investigate the knowledge, confidence and coping ability about emergency treatment, and the impact of right knowledge and confidence in practice on coping ability in part of dental hygienists. In addition, we suggest emergency treatment knowledge for develop substantive education program applicable to clinical as required data. Methods: This subjects were 259 dental hygienists working in dental setting Seoul, Gyeonggi-do from June 5 to July 20, 2016. We analyzed the data with frequency analysis, descriptive statistics, t-test, one-way ANOVA, pearson correlation coefficient, regression analysis by using SPSS. Results: Emergencies experienced by a dental hygienist in dental practice were fainting, local anesthetic allergies, and seizures. As a result of comparing the first aid knowledge, self-confidence, coping ability according to general characteristics of the study subjects, university graduation was higher than college and 3~5 years of working experience showed higher self confidence(F=3.837, p=0.023). The performance of self confidence and coping ability according to the characteristics of first aid showed high results in first aid training and dental hygienist having CPR license. Based on multiple regression analysis, confidence about emergency treatment is the biggest impact on coping ability(p<0.05). Conclusions: Dental hygienists need to develop and provide programs that can improve the ability of dental hygienists to respond appropriately and promptly in case of emergencies by recognizing the importance of first aid through conservative education.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.2
• /
• pp.125-132
• /
• 2020

Objectives: The requirement for overnight hospital stay should be considered preoperatively according to patient-related factors, type of surgery, and anesthetic management plan. In this study, we aimed to define the major factors that influence consideration of overnight hospital stay in patients undergoing oral and maxillofacial (OMF) surgery in an operating room (OR) of a dental hospital in an outpatient setting. Materials and Methods: The records of patients who underwent oral procedures under general anesthesia between 2014-2017 were reviewed. Results: A total of 821 patients underwent oral procedures under general anesthesia; 631 of them underwent OMF surgery in the OR of a dental hospital, and 174 of these patients were hospitalized for overnight stay. There was no significant difference in the number of patients with comorbidities between the outpatient and hospitalized patient groups (P=0.389). The duration of surgery was longer in the hospitalized patient group (105.25±57.48 vs 189.62±82.03 minutes; P<0.001). Double-jaw (n=15; 310.00±54.21 minutes) and iliac crest grafting surgeries (n=59; 211.86±61.02 minutes) had the longest durations. Patients who underwent iliac crest grafting had the highest rates of hospitalization (79%). The overall recovery period was longer in outpatients (119.40±41.60 vs 149.83±52.04; P<0.001). Conclusion: Duration of surgery was the main determinant in considering whether a patient required overnight hospital stay. However, patients with an American Society of Anesthesiology physical status score <3 may be scheduled for OMF surgery in the OR of a dental hospital in an outpatient setting regardless of duration of surgery if overnight hospital stay is planned or an extended recovery period is provided until patients meet the discharge criteria.

• Journal of Technologic Dentistry
• /
• v.23 no.1
• /
• pp.107-114
• /
• 2001

R.P.D fabrication can be made if the skills already is properly used in the manufacturing press. You may feel extremely comfortable to wear it. The material used has high elasticity that it can endure the hole process of Acetal Wax pattern casting without any deformation moreover its adaptability is not bad. Because of the poor financial condition of patterns and health insurance, Acetal R.P.D Framework can be one of the best alternatives used for setting clasp partial denture cheaply. R.P.D Framework is aesthetically excellent. The color caused by saliva is so similar to that of the rest of teeth that even dentists as well as patients can not recognize clasp arm. Clasp also helps to secure prosthesis ideally without damaging teeth due to its deep position downward. Since dentists and patients have a good reaction to clasp so far, we are encouraged to apply it to other technical fields.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.11-19
• /
• 2019

Purpose: This study evaluated the usability of and satisfaction with two types of computer-aided design (CAD) software among users who had experience with dental implant CAD software and those who did not. Materials and Methods: Dental technicians (n = 20) who had previous experience with dental implant CAD Software and students from the College of Dentistry (n = 12) who had never designed implant custom abutments were asked to evaluate two types of CAD Software, Exocad and Deltanine. In addition, the participants were asked to fill out a structured questionnaire (Section 1: Entering basic information and retrieving files; Section 2: Setting conditions before abutment design; Section 3: Setting abutment design; and Section 4: Overall satisfaction). For the statistical analysis of the collected data, Mann-Whitney U test was used (${\alpha}=.05$). Results: The ease of design and satisfaction with the implant CAD Software, evaluated with respect to 21 statements divided into four Stages, were significantly higher for Exocad in both groups for Secion 1. For Sections 2 and 3, participants with experience evaluated Deltanine to be significantly better. For Section 4, both groups evaluated Exocad Software to be better. Conclusion: Overall, the Exocad Software was evaluated as having better usability and offering greater satisfaction. However, in terms of performance in the core of the design process, i.e. Sections 2 and 3, Deltanine was rated higher by the experienced users. Thus, if the user interface design parts are supplemented, Deltanine CAD Software could be put to a wider use in clinics.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.429-442
• /
• 2000

Based on current evidence in the literature, it is known that endotoxin is a weakly adherent surface phenomenon and that power-driven instruments can be used to accomplish definitive root detoxification and maximal wound healing without overinstrumentation of root and without extensive cementum removal. And one of the newly developed curette tips used with low power of piezoelectric ultrasonic scaler, is effective to remove calculus and not to remove the excessive cementum. The purpose of this study is therefore, to assess the influence of ultrasonic power and various working parameters on root substitute removal when instrumentation is performed with the curette tip on piezoelectric ultrasonic scaler. This study assessed defect depth, width and area resulting from instrumentation using a piezoelectric ultrasonic scaler with a curette type tip in vitro to acrylic resin block as a root substitute. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1 N, 2 N) and instrumentation time(5 sec, 10 sec, 20 sec) and power setting was adjusted 0,2,4,8 in P mode. Power setting had the greatest influence on defect depth compared to lateral force and instrumentation time(standardized regression parameter estimates${\pm}$standard error, $0.37{\pm}0.02$, $0.19{\pm}0.02$, $0.07{\pm}0.02$). The effects on defect area also greatest for power setting($0.57{\pm}0.03$) compared to lateral force and instrumentation time($0.33{\pm}0.03$, $0.12{\pm}0.03$). The effect of the power setting on the defect width($0.15{\pm}0.01$) is not so great as defect depth or defect area compared to lateral force($0.12{\pm}0.01$) and effect of instrumentation time is minimal($0.02{\pm}0.01$). It could be concluded that the power setting has the greatest influence on the defect depth and area in curette type tip with low power of piezoelectric ultrasonic device. Many parameters can be adjusted in various situation in clinical use of piezoelectric ultrasonic scaler but the power setting is the first parameter to be adjusted.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.99-100
• /
• 2006

The concept of dental clinic have been changed along the advanced dental science to meet the need of setting up high-technology-digital appliances. As the general idea about the dental clinic has been changed from systematic connection, the expansion of zoning needs to become more accurate and mote detailed. In the spacious waiting room. the interment cafe has been established to supply the information services, and the various multi-imaged channels, which were built in, will relieve the boredom of the waiting time. The formation of water space leads to the effect of humidification and makes parents share visual and auditory sympathy All of the unit-chairs attached cameras in the consultation room enables people to diagnose more quickly and precisely through the computerized system. Partitions have been set of to put it in and to help diagnosis process to be done smoothly in the formational space. The whole atmosphere is intended to be harmony with the natural surroundings in Je-Ju. It will inspire people visiting this clinic to image the deep blue sea in Je-Ju. By using projective non-material a lot, especially material wooden windows and doors, it is believed to create the bright and stable atmosphere. It will lead patients feel comfortable.