• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.184-190
• /
• 2012

Purpose: The purpose of this study was to measure the absorbed dose and to calculate the effective dose for one periapical radiography using the portable and wall type dental X-ray machines. Materials and methods: Thermoluminescent chips were placed at 25 sites throughout the layers of the head and neck of a tissue-equivalent human skull phantom. The man phantom was exposed with the portable and wall type dental X-ray machines. For one periapical radiography taken by portable dental X-ray machine, the exposure setting was 60 kVp, 2 mA and 0.2 seconds, while for one periapical radiography taken by wall type dental X-ray machine, exposure setting was 70 kVp, 8 mA and 0.074 seconds. Absorbed dose measurements were performed and equivalent doses to individual organs were summed using ICRP 103 to calculate effective dose. Results: In the upper anterior periapical radiography using portable dental X-ray machine and in the lower posterior periapical radiography using both machines, the highest absorbed dose was recorded at the mandible body. The effective dose in upper anterior periapical radiography using portable and wall type dental X-ray machines was $4{\mu}Sv$, $2{\mu}Sv$, respectively. In the lower posterior periapical radiography, the effective dose for each portable and wall type dental X-ray machines was $6{\mu}Sv$, $2{\mu}Sv$. Conclusion: It was recommended that the operator use prudently potable dental X-ray machine because that the effective dose in the periapical radiography using wall type dental X-ray machine was lower than that in the periapical radiography using portable dental X-ray machine.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.346-351
• /
• 2018

Background: Carbonate apatite ($CO_3Ap$) and silica-calcium phosphate composite (SCPC) are bone substitutes with good prospect for dental application. SCPC creates a hydroxyapatite surface layer and stimulate bone cell function while, $CO_3Ap$ induce apatite crystal formation with good adaptation providing good seal between cement and the bone. Together, these materials will add favorable properties as a pulp capping material to stimulate mineral barrier and maintain pulp vitality. The aim of this study is to investigate modification of $CO_3Ap$ cement combined with SCPC, later term as $CO_3Ap-SCPC$ cement (CAS) in means of its chemical (Calcium release) and physical properties (setting time, DTS and pH value). Methods: The study consist of three groups; group 1 (100% calcium hydroxide, group 2 $CO_3Ap$ (60% DCPA: 40% vaterite, and group 3 CAS (60% DCPA: 20% vaterite: 20% SCPC. Distilled water was employed as a solution for group 1, and $0.2mol/L\;Na_3PO_4$ used for group 2 and group 3. Samples were evaluated with respect to important properties for pulp capping application such as pH, setting time, mechanical strength and calcium release evaluation. Results: The fastest setting time was in $CO_3Ap$ cement group without SCPC, while the addition of 20% SCPC slightly increase the pH value but did not improved the cement mechanical strength, however, the mechanical strength of both $CO_3Ap$ groups were significantly higher than calcium hydroxide. All three groups released calcium ions and had alkaline pH. Highest pH level, as well as calcium released level, was in the control group. Conclusion: The CAS cement had good mechanical and acceptable chemical properties for pulp capping application compared to calcium hydroxide as a gold standard. However, improvements and in vivo studies are to be carried out with the further development of this material.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.8 no.1
• /
• pp.84-89
• /
• 1999

These days, Dental Technic has been contributed to make more delicating Dental Prosthesis Restoration for patient and dentist. Diagnostic wax-up and making Temporary Crown are emphasized as an important part of Dental Technic. Choosing suitable Material and working with various new Equipments like Microscope improve accuracy. Repeated practice by setting up an organized system gives better result. Also, Esthetic Prosthesis requires patient's appearance and personality as well as patient' age, sex, and shade so on. Moreover, the problem which occurs by the patient's oral condition ha to be discussed before taking final impression. At a time like this, Scientific-mind and Logical thought Ability should be considered the important issue for more progressive Dental Technic.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.281-289
• /
• 2020

Purpose: This study analyzes the self-efficacy and CAD/CAM practice of dental technology students with the aim of providing data that will be useful for improving CAD/CAM education. Methods: A questionnaire survey on self-efficacy and CAD/CAM practice was given to students who participated in face-to-face classes in the Department of Dental Technology at a college in Daegu and Gyeongsangnam-do. The survey period was two weeks long (June 15, 2020 to July 2, 2020), and 84 students completed the questionnaire. Results: The higher the self-efficacy, the fewer difficulties or mistakes students made in CAD/CAM practice. The most difficult parts of the scanning process were the top and bottom arc operation and the bite match arc insertion. The most difficult part of the design work was the use of (multiple) tools. The difference between the degree of difficulty and the degree of mistakes during the practical course was shown as the margin line setting in the design work. Setting the margin line was not difficult, but the degree of mistakes was nonetheless high. In the CAM process, height control was the most difficult part, but the degree of mistakes did not differ according to students' self-efficacy. Conclusion: Given that higher self-efficacy correlated with fewer difficulties or mistakes in CAD/CAM practice, students should be encouraged to enhance their self-efficacy. This may be done by improving their satisfaction with their major course of study, forming friendly relations with their colleagues, and increasing the ratio of performance rather than observation in CAD/CAM practice.

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.253-257
• /
• 2014

Objectives: This study aimed to compare the surface microhardness of mineral trioxide aggregate (MTA) samples having different thicknesses and exposed to human blood from one side and with or without a moist cotton pellet on the other side. Materials and Methods: Ninety cylindrical molds with three heights of 2, 4, and 6 mm were fabricated. In group 1 (dry condition), molds with heights of 2, 4, and 6 mm (10 molds of each) were filled with ProRoot MTA (Dentsply Tulsa Dental), and the upper surface of the material was not exposed to any additional moisture. In groups 2 and 3, a distilled water- or phosphate-buffered saline (PBS)-moistened cotton pellet was placed on the upper side of MTA, respectively. The lower side of the molds in all the groups was in contact with human blood-wetted foams. After 4 day, the Vickers microhardness of the upper surface of MTA was measured. Results: In the dry condition, the 4 and 6 mm-thick MTA samples showed significantly lower microhardness than the 2 mm-thick samples (p = 0.003 and p = 0.001, respectively). However, when a distilled water- or PBS-moistened cotton pellet was placed over the MTA, no significant difference was found between the surface microhardness of samples having the abovementioned three thicknesses of the material (p = 0.210 and p = 0.112, respectively). Conclusions: It could be concluded that a moist cotton pellet must be placed over the 4 to 6 mm-thick MTA for better hydration of the material. However, this might not be necessary when 2 mm-thick MTA is used.

• Journal of Technologic Dentistry
• /
• v.9 no.1
• /
• pp.79-88
• /
• 1987

According as the density of prosthetic by casting among the prosthetic restorations is increasing now, the definition and the bounds as to the casting, the method of making the right casting and the establishment of concepts about a minute report and so on, the establishment of the basic principles like those are unavoidable, and then the casting shrinkage must be compensated by setting expansion thermal expansion. Hygroscopic expansion in making the good casting types as we demonstrated that already asbestos lining. We confirmed the fact that the considerable concern about the surface tension and the gas inspiration? Is necessary in making better the casting.

• Journal of Korean Dental Hygiene Science
• /
• v.2 no.1
• /
• pp.51-62
• /
• 2019

The purpose of this study was to investigate the status and views on the dental team composition and works, the experience of a dental manpower shortage and opinions on the solution. The subjects were 313 dentists and dental hygienists. The mobile questionnaires were conducted on the status of dental team composition and works, the experience of a dental manpower shortage and opinions on the solution. There was no big difference between the current dental team composition and ideal composition ratio, and dentists answered that it would be more ideal to reduce dental hygiene and increase nurse assistant when the working dentist was 3~5. 85.6% of the dentists and 56.4% of the dental hygienists had difficulty in employing the dental auxiliary personnel. The difficulty level was 8 out of 10 points among dentists and 5.7 points among dental hygienists. 91.1% of the dentists and 95.5% of the dental hygienists agreed on the necessity of expanding the dental hygienist's work. The dental works were temporary crown making and setting, surgical operation assistance, and overall dental assistance. Based on the results of this study, it is necessary to continuously make efforts to communicate with the dental personnel in Korea to solve a lot of problems such as the job assignment, the dental personnel policy and system, and the work environment.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.3
• /
• pp.183-190
• /
• 2017

Background: It is important to evaluate preoperative anxiety and prepare sedation when performing dental surgery under local anesthesia. Spielberger's State-Trait Anxiety Inventory (STAI) is useful for predicting preoperative anxiety. State anxiety is defined as a subjective feeling of nervousness. Reduction in the number of the state anxiety items (questions) will be clinically important in allowing us to predict anxiety more easily. Method: We analyzed the STAI responses from 1,252 patients who visited our institution to undergo dental surgery under local anesthesia. Multiple linear regression analysis was conducted for 9 groups comprising anxiety level determinations using the STAI; we then developed a coefficient of determination and a regression formula. We searched for a group satisfying the largest number of requirements for regression expression while setting any necessary conditions for accurately predicting anxiety before dental surgery under local anesthesia. Results: The regression expression from the group determined as normal for preoperative state anxiety was deemed the most suitable for predicting preoperative anxiety. Conclusion: It was possible to reduce the number of items in the STAI by focusing on "Preoperative anxiety before dental surgery."

• Journal of Technologic Dentistry
• /
• v.45 no.1
• /
• pp.8-13
• /
• 2023

Purpose: This study aims to induce interest in the future society that could change with the advance of the 4th Industrial Revolution. It also intends to identify the direction of university education by investigating the perception of university students majoring in dental laboratory technology about the latest technology used in this era. Methods: The study recruited 240 college students majoring in dental laboratory technology at K and D universities in Gangwon-do and Daejeon, respectively. Online and face-to-face surveys were conducted from March 20, 2022 to April 10, 2022. Results: Although their interest in the use of emerging technologies during the 4th Industrial Revolution was above average 3.85, the dental laboratory technology students exhibited relatively high levels of anxiety 3.19 and reluctance 2.96. Second, their interest in emerging technologies demonstrated positive correlations with major satisfaction and understanding of concepts and readiness, whereas reluctance and anxiety pointed to negative correlations with understanding of the concepts of the 4th Industrial Revolution. Conclusion: Formulating guidelines is necessary to help students increase their understanding of the 4th Industrial Revolution and prepare them appropriately by setting an educational direction that can flexibly respond to the rapidly changing industrial environment.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.9-18
• /
• 2002

The aim of this study is to propose effective measures for shortage of manpower of dental technology laboratory in Gangwon province by means of examining not only the history of Gangwon association, present condition of transference of members of Gangwon association from 1990, of missing members and annual rate of participation in repair education with setting object of study into Gangwon association under the influence of the Korean Dental Technology Association but also the present condition of opening and closing laboratory, amount of business connection and condition of shortage of manpower and its field with setting object of study into 28 dental technology laboratories. Results from this study are like followings : First, Gagnwon association was established in 1984 as the eleventh in the line of the board, reorganization of board is conducted 8 times up to the eighth in the line of the board in 2001. board is composed of 16 persons including president and operated its term as 3 years. Second, a number of representative and ordinary member of Gangwon association has increased gradually from 1992 to 2001. in aspect of annual rate of participation in repair education, representative's is more higher than ordinary member's overall. the worst rate of whole members' is shown as 47.9% and the its best rate is shown as 92.0%. in addition, 70$\sim$80% rate of participation into repair education is shown most frequently as 8 times of whole 20 times from 1992 to 2001. Third, 29 authorized dental technology laboratories have registered in Gangwon association until march 2002 within 9 cities and counties. in consideration of establishment location. Gangneung city has most amount as 7 laboratories(24.1%), Wonju city has 5(17.2%), Samcheok city and Sokcho city, each has 4(13.8%), Chuncheon city has 3(10.3%), Donghae city and Taeback city, each has 2(6.9%) and Yangyang and Yongwol county, each has 1(3.4%). Fourth, amount of work personnel of laboratory in Gangwon province is 1$\sim$10 persons as the maximum value. 23 laboratories(82.1%) have their own work personnel as amount of 5 and below. in aspect of main business, most of laboratories focus on the Porcelain and Crown. and 16 laboratories(57.1%) have their own expensive equipments such as Milling. its also suggests that 16 laboratories(57.1%) suffer their shortage of working personnel. specifically, 6 laboratories(21.4%) suffer the highest shortage especially in Denture field, Fifth, whole number of Gangwon association is up to 101 members (28 representatives and 73 ordinary members) until December 31th 2001. amount of immune from repair education of Gangwon association until October 2001 is up to 10 persons, and missing members from 1997 is up to 18 persons, suspension of business is up to 4 persons. in aspect of transference from 1990, transfer-in is up to 21 persons and transfer out is up to 16 persons.