• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.351-356
• /
• 2010

Purpose: The purpose of this study was to evaluate the fracture strength between the core and veneering ceramic according to 2 core materials, In-Ceram Alumina and In-Ceram Zirconia, fabricated by electro ceramic layering technique. 2 different fixed partial denture cores of three units were veneered by veneering ceramic(Ceranion, Noritake) (n=10). Methods: The fracture strengths between the core and veneering ceramic were measured through the 3 point bending test. The interfaces between the core and veneering ceramic were observed with the X-ray dot mapping of EPMA. Results: The result of fracture strength was observed that IZP group, In-Ceram Zirconia core, had higher fracture strength. IPA group, In-Ceram Alumina core, had fracture strength of 359.9(${\pm}$86.2) N. IZP group, In-Ceram Zirconia core, had fracture strength of 823.2(${\pm}$243.0) N. X-ray dot mapping observation showed that a major element in the core and veneering ceramic of IPA group was alumina and silica, respectively. No binder was observed in interfaces between the core and veneering ceramic, and no ion diffusion or transition was observed between the core and veneering ceramic. However, apparent ion diffusion or transition was observed between the core and veneering ceramic of IZP group.

• 대한치과기공학회지
• /
• 제36권2호
• /
• pp.75-81
• /
• 2014

Purpose: This study was to compare adaptations of lithium disilicate CAD/CAM crowns fabricated with different scanning systems. Methods: This study selected the mandibular right first molar as an abutment for experiments and produced 10 working models. Lithium disilicate crowns appropriate for each abutment were produced by using a CEREC$^{(R)}$ CAD/CAM system. The independent t-test was then used to compare and analyze the data obtained from the two groups(${\alpha}$=0.05). Results: Mean(SD) adaptation were $86.93(22.82){\mu}m$ for the InS group, $88.42(26.77){\mu}m$ for the ExS group. They were no statistically significant differences between groups for adaptation(p>0.05). Conclusion: Within the limitations of this study, the results suggest that the accuracy of all investigated optical scanner were satisfactory for clinical use. Further assessment and improvement of the lithium disilicate ceramic for the fabrication of FPDs is evidently still required.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.119-128
• /
• 2007

Although there are many different ways that restorations can be made, it can be said that the biocompatibility of abutment and crown is very important in this experiment. When placed in the actual oral cavity, the differences were obvious. Compared to In-ceram Aluminium, the structure that is obtained after firing reveals a particularly homogeneous distribution of the crystal and glass phase. The In-ceram aluminium system had many problems, such as having weak tensile strength, and having low bonding strength due to the shrinking that occurs after firing. Because of the opaque finish of the metal frame, the two may look similar from the outside, but it is evident that there are differences between using a metal frame and In-ceram. VITA VM9 has been designed as a special ceramic featuring a fine structure or stabilized Zro2 substructures, and so the VITA VM9 excels in its light refraction and reflection behavior, which is similar to natural teeth. It also has outstanding chemical balance, which presents advantages such as considerably reduced accumulation of plaque on the ceramic surface.? This ultimately results in easier care and cleaning for the patient.

• 대한치과보철학회지
• /
• 제52권2호
• /
• pp.136-142
• /
• 2014

최근 많이 이용되고 있는 지르코니아-도재 수복물은 그 적용범위가 점차로 증가하고 있다. 임상연구결과에서 지르코니아 코어는 매우 높은 성공율을 보이고 있으나 코어 위에 축성되는 전장도재는 기존에 이용되어온 금속-도재 수복물에 비해 높은 파절빈도를 나타내고 있다. 이러한 파절의 원인으로 여러가지 요소가 거론되고 있으나 아직 명확하게 설명하고 있지는 못하다. 최근 전장도재 축성 후 냉각과정에서 잔존하는 잔류응력이 전장도재의 파절에 영향을 미칠 수 있다는 연구결과가 속속 발표되고 있다. 본 고찰에서는 잔류응력이 무엇이며 도재 축성 후 냉각과정에서 어떤 기전을 통해 전장도재 내에 잔류응력이 발생하는지, 또한 기존의 금속-도재 수복물에서 발생하는 잔류응력과는 어떤 차이가 있는지 문헌고찰을 통해 살펴보고자 한다.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.413-419
• /
• 2021

Purpose: The aim of this in vitro study was to assess the role of bandwidth on the area of magnetic resonance imaging (MRI) artifacts caused by orthodontic appliances composed of different alloys, using different pulse sequences in 1.5 T and 3.0 T magnetic fields. Materials and Methods: Different phantoms containing orthodontic brackets (ceramic, ceramic bracket with a stainless-steel slot, and stainless steel) were immersed in agar gel and imaged in 1.5 T and 3.0 T MRI scanners. Pairs of gradient-echo (GE), spin-echo (SE), and ultrashort echo time (UTE) pulse sequences were used differing in bandwidth only. The area of artifacts from orthodontic devices was automatically estimated from pixel value thresholds within a region of interest (ROI). Mean values for similar pulse sequences differing in bandwidth were compared at 1.5 T and 3.0 T using analysis of variance. Results: The comparison of groups revealed a significant inverse association between bandwidth values and artifact areas of the stainless-steel bracket and the self-ligating ceramic bracket with a stainless-steel slot(P<0.05). The areas of artifacts from the ceramic bracket were the smallest, but were not reduced significantly in pulse sequences with higher bandwidth values(P<0.05). Significant differences were also observed between 1.5 T and 3.0 T MRI using SE and UTE, but not using GE 2-dimensional or 3-dimensional pulse sequences. Conclusion: Higher receiver bandwidth might be indicated to prevent artifacts from orthodontic appliances in 1.5 T and 3.0 T MRI using SE and UTE pulse sequences.

• 대한치과기공학회지
• /
• 제34권1호
• /
• pp.45-56
• /
• 2012

Purpose: This study reviews the recent trend of Korean Academy of dental technology research. The data examined are the articles published in the Korean Journal of Korean Academy of dental technology from 1979 to 2011. Methods: The data are retrieved through the internet database Korean Academy of dental technology. The number of paper published is 540, published in 33 volumes of the journal. This study examines research methods, subjects, and author information. Results: Among the 540 articles collected, 422 are Original papers, 106 Clinical Technical Papers, 12case Other papers. 235 are experimental studies. Most experimental studies(235) have examined the ceramic(Porcelain) parts(117). The sole author of 315, co-author of 225 appeared. In turn of dental technicians, and students appeared. Conclusion: The study is to present basic data for research and to indicate the direction of their study in the future.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.372-376
• /
• 1998

Using calcium-phosphate-powder targets with the Ca/P ratios of 1.0-1.67, hydroxyapatite ($Ca_{10}(PO_4)_6(OH)_2$, HAp) thin films with 4-7㎛ thickness were prepared on titanium metal plates by r.f. magnetron sputtering, followed an annealing at $200^{\circ}C$ for 24 hr under a high water vapor pressure using an autoclave. All the specimens were systematically characterized by XRD, FT-IR, SEM and EDS analyses. The post-annealed films were confirmed to be a nonstoichiometric oxyhydroxyapatite by XRD and FT-IR measurements.

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.251-257
• /
• 2006

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.209-213
• /
• 2006

• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.193-200
• /
• 2008