• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.261-262
• /
• 2018

In this study, the quality of recycled aggregate for concrete was investigated as the number of recycled aggregate crushing cycles, grinder and crusher, peeling and crushing. First, the quality of density, absorption ratio and solid content was improved as the separation distance decreased and the number of crushing increased, depending on the number of crushing of recycled aggregate and the distance between mantle and cone cave. The quality of density, absorption ratio and solid content was improved as the wire mesh used in striking plate and the number of hammers increased, depending on the type of striking plate and the number of hammers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.88-95
• /
• 2002

Recent development in the field of RE-Ba-Cu-O (REBCO, RE: Y or rare earth elements) bulk high-Tc superconductors (HTS) is reviewed in the present paper. After the fatal weak link problem of sintered REBCO superconductors has been overcome by melt processing, this field has been greatly advanced during last ten years. The critical current density $J_c$ at 77 K has been enhanced by introducing effective flux pinning sites into the $REBa_2Cu_3O_y$ (RE123) superconducting matrix. Large melt-textured REBCO bulk crystals have been fabricated with the TSMG(top-seeded melt growth) technique. Mechanical properties of REBCO bulks have been improved by using the Ag additive or epoxy resin. Real bulk applications such as current lead, fault current limiter, flywheel energy storage system, magnetic field source, magnetic separation system, and etc., surely come true near future.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.279-282
• /
• 2011

Coexistence analysis is extremely important in examining the possibility for spectrum sharing between orthogonal frequency-division multiplexing (OFDM)-based international mobile telecommunications (IMT)-Advanced and other wireless services. In this letter, a new closed form method is derived based on power spectral density analysis in order to analyze the coexistence of OFDM-based IMT-Advanced systems and broadcasting frequency modulation (FM) systems. The proposed method evaluates more exact interference power of IMT-Advanced systems in FM broadcasting systems than the advanced minimum coupling loss (A-MCL) method. Numerical results show that the interference power is 1.3 dB and 3 dB less than that obtained using the A-MCL method at cochannel and adjacent channel, respectively. This reduces the minimum separation distance between the two systems, which eventually saves spectrum resources.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.633-637
• /
• 1999

Supercritical fluid of carbon dioxide was used to investigate the effects of its temperature and density on the distribuion coefficients of fatty-acid esters composing fish oil. The distribution coefficient of fatty acid ester was greatly different from each other according to the temperature and density of the supercritical fluid. The possibility of separation of a certain fatty acid from the mixture of fatty acids was tested. The density of the supercritical fluid showing the great differences ofthe distribution coefficients among the fatty acid esters ranged from 0.3 g/mL to 0.4 g/mL. The retrograde condensation took place at high densities of the supercritical fluid.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.386-387
• /
• 2006

This study is about the recycling technology of scrap a PCB(printed circuit board) produced in home appliances or automobile industry. And we develop the recycling technology of cooper (Cu)which is contained to leaching solution. In stead of electrolytic collecting in existing sulphuric atmosphere, we apply process using the ammonia solution which is used in economizing energy. So m the process of electrolyzing scrap a PCB through the leaching and separation, we examine the effect of the nickel contained to the solution and the cooper degree of purity which is changed according to current density.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.245-268
• /
• 2012

Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.97-103
• /
• 1993

This study was investigated as a step for the purpose of successful introduction of cytoplasmic inherited characters between the different plants. Cytoplasts were separated from the protoplasts of CMS(cytoplasmic male sterility) line such as MS Burley 21 which carried from Nicotiana megalosiphon. The cytoplasts were fused to protoplasts derived from Nicotiana tabacum Br 64 with PEG(polyethylene g1yco1). The cytoplasts were separated by density gradient centrifugation. Efficient separation of cytoplasts depended on the difference of specific density of gradient solution. However, the iso-osmolality of gradient solution was not important to separate the cytoplasts. The cells for a cybrid were fused with 50% concentration of PEG.

• Elastomers and Composites
• /
• v.57 no.3
• /
• pp.92-99
• /
• 2022

A large amount of particles on the roads is produced by friction between the vehicles and the road surface and by inflow from outside. The type of these particles affects the abrasion behavior of tire tread. In this study, road dust collected at a bus stop was separated by size, and the particles with sizes of 106-212 mm were analyzed. The particles were separated by density using NaI and NaBr aqueous solutions with densities in the range of 1.10-1.80 g/cm³ with the 0.10 g/cm³ interval. In the road dust sample, the following particle types were found: tire-road wear particles (TRWPs), asphalt pavement wear particles (APWPs), plant-related particles (PRPs), road paint wear particles (RPWPs), and plastic particles (PPs). The densities of TRWPs, APWPs, PRPs, and RPWPs were 1.20-1.80, >1.60, >1.10, and >1.40 g/cm³, respectively, while PPs were found in all density ranges. Additionally, many small mineral particles were observed on the particles. Order of the relative content of the particles was PRP > TRWP > APWP ~ RPWP > PP. APWPs that were stuck to TRWP could be removed by chloroform treatment. The shapes of the particles were characterized using their magnified images.

• Korean Journal of Veterinary Service
• /
• v.22 no.4
• /
• pp.377-383
• /
• 1999

Polymorphonuclear (PMN) leucocytes are fundamental importance to the body's defense mechanism and play a major role in the local and systemic reactions to infectious disease. Investigation of the physiological and pathological role of the various leucocyte subtypes in host defence mechanisms is dependent upon the isolation of adequate numbers of viable, pure leucocyte fractions. This report describes the separate frequency of PMN leucocytes both from buffy coat layer and from packed RBC layer when bovine peripheral blood was treated with various anti-coagulants such as acid-citrate-dextrose(ACD), ethyldiaminetetraacetic acid(EDTA), sodium citrate and heparin. The separate frequencies of PMN leucocytes from buffy coat layer was 60.4$\pm$9.6%(heparin), 56.8$\pm$11.8%(sodium citrate), 30.6$\pm$14.1%(ACD) and 6.2$\pm$3.7%(EDTA), in order. Those from packed RBC layer monitored with EDTA, ACD, sodium citrate and heparin was 85.0$\pm$4.7%, 84.3$\pm$5.5%, 83.8$\pm$6.5% and 76.3$\pm$7.7%, respectively. The Ficoll-hypaque(FH) density gradient method was used to remove a small part of lymphocytes and/or monocytes from leucocytes in packed RBC layer. With the result that it increased separate frequency of PMN leucocytes from EDTA(89.9$\pm$2.4%), ACD(89.5$\pm$3.6%), and sodium citrate(83.6$\pm$10.3%) than heparin(68.4$\pm$13.9%). These results indicate that the use of EDTA and ACD as anticoagulant Is suitable for the separation of PMN leucocytes from bovine peripheral blood, and that the FH density gradient method is able to increase the separate frequency of PMN leucocytes from packed RBC layer.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.211-216
• /
• 2018

Separation technology combining adsorption and membrane is expected to be applied in many fields such as water treatment. In this fusion technique, a functional carbon membrane having a carbon whisker grown on the surface of the membrane was developed to inhibit membrane fouling, which is a problem in the membrane separation process. In this study, to elucidate the mechanism of manufacturing the functional carbon membrane, the membrane was pretreated with the polymer latex of each mixing ratio and the membrane was formed by the CVD (Chemical Vapor Deposition) method. The membrane was analyzed by scanning electron microscope (SEM), CHN analyzer (Elemental Analyzer), and X-ray diffraction (XRD). As a result, the diameter and density of carbon whiskers were higher in case of polyvinyl di-chloride (PVdC): polyvinyl chloride (PVC) = 4.5: 55. It seems possible to control the diameter and density of the carbon whiskers according to the hydrogen content of the polymer latex.