• Journal of Magnetics
• /
• v.14 no.4
• /
• pp.144-146
• /
• 2009

This study examined the structure and perpendicular magnetization of FePt films grown on Pt/Fe/MgO(100) buffered Si(100) substrates by molecular beam epitaxy. The [Fe(0.17nm)/Pt(0.2nm)]$_N$ multilayers were prepared at room temperature to form a $L1_0$-FePt phase after vacuum annealing. Perpendicular magnetic anisotropy (PMA) was observed in the films after at least 15 repetitions (N = 15) of Fe/Pt deposition and annealing at $300{^{\circ}C}$ for 1 hour. Careful structural analysis of the films was carried out by x-ray diffraction and high-resolution transmission electron microscopy. These results will assist in the development of the low temperature $L1_0$- FePt deposition process, which will be essential for future extremely high density magnetic recording media.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.842-845
• /
• 2000

It is essential to reduce stiction between the slider and the disk for super-smooth media such as glass disk for high density recording. We developed a stiction-reduced slider by fabricating mechanical bumps on the air bearing surface of the slider by indentation technique. This paper presents a possibility and concept of Stiction-Free-Slider which can operate on the data zone of a magnetic disk. The slider hat many bumps and their heights are in the tens of nm range. The SFS shows good performance on the data zone. Moreover, little wear of the bumps was observed when the preload was small.

• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.744-751
• /
• 2000

To achieve lower flying height for high areal recording density, the laser zone texturing of the disk needs to be designed to reduce glide height. One problem of the laser bump design is that the regular laser bump pattern often produces glide resonance phenomenon, which leads to failure of the glide height test. However, it was found in this study that glide resonance is an intrinsic problem of the glide head used and resonance phenomenon depends on the type of the head slider, that is, the natural frequency of the slider body. Therefore, higher glide height or glide failure caused by glide resonance does not lead to head/media interface problem in the real drive operating conditions in which the data head is used. Pseudo-random bump pattern greatly reduces the glide resonance. Smaller bump pitch will also help to reduce the glide resonance. However, as bump spacing becomes smaller, glide height will be increased due to increased air pressure developed around the bumps. Lowering bump height is the most effect way to reduce glide avalanche.

• Journal of Environmental Health Sciences
• /
• v.15 no.1
• /
• pp.89-96
• /
• 1989

An aerated submerged biofilm reactor is the reactor in which influent organic substrates are aerobically oxidized by suspended biomass and attached biomass of biofilm grown on the surface of submerged media. The objective of this study was to investigate the effect of aeration intensity on microbial characteristics and treatment efficiency in submerged biofilm process. In the organic loading rate (4.3kg BOD/$m^{3} \cdot day$), biofilm thickness (420-780$\mu$m) and attached biomass(1.79-2.94mg/cm$^{2}$) increased as the aeration intensity increased (2-8m$^{3}$ air/$m^{2} \cdot hr$), but biofilm density decreased (42.25-37.69mg/cm$^{3}$). The minimum aeration intensity for prevention of deposited biomass was 2m$^{3}$ air/$m^{2} \cdot hr$. The minimum dissolved oxygen of 2.5mg/l had to be maintained for improved efficiency.

• Journal of Magnetics
• /
• v.5 no.4
• /
• pp.143-146
• /
• 2000

In this study, the magnetic properties of CoCrPt films (far longditudinal recording) on a novel VMn underlayer were measured and compared with similar films on conventional Cr underlayers. It was found that the VMn film had (200) preferred orientation and the lattice constant was about 0.2967 nm, which is slightly larger than that of the Cr film, 0.2888 m. The grain size of the VMn film was 9.8 nm at 30 m thickness, about 39% smaller than that of a similarly deposited Cr. The CoCrPt/VMn films showed higher coercivity in comparison with the CoCrPt/Cr films. The coercivity increase is attributed to the increased Co (11.0) texture, improved lattice matching between Co (11.0) and VMn (200), and lower stacking fault density. V or Mn must have diffused into the CoCrPt magnetic layer uniformly rather than preferentially along grain boundaries. This reduced Ms at higher substrate temperature.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.9-15
• /
• 1996

In this paper, we propose a new detector based on the median-shift sign. We call it the median-shift sign (MSS) detector, which is an extension of the classical sign detector. We first analyze the problem of detecting a dc signal in noise of known probability density function (pdf). The MSS detector with the optimum median-shift value, the optimum MSS detector, performs better than the sign detector in Gaussian noise: it has the best performance among the detectors compared in Laplacian and Cauchy noise. It is shown that the MSS detectors with constant median-shift values are nearly equal to the optimum MSS detector. We also analyze the problem of detecting a dc signal when only partial information is available on the noise. The MSS detectors with constant median-shift values are almost equal to the sign detector in Gaussian noise: they perform better than the sign and Wilcoxon detectors for most signal ranges in Laplacian and Cauchy noise.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.1-4
• /
• 2001

In electrophoresis, it is studied to get best condition of suspension media with alcoholic system for superconducting film. High-temperature superconductor films of $YBa_{2}Cu_{3}O_{7-x}$ were fabricated by electrophoretic deposition(EPD) from alcohol-based suspension. Maximum stability is observed for the suspension containing iso-alcohol as dispersion medium. However, for the formation of a dense and adherent coating of YBCO on a silver substrate by EPD. the best results were obtained in mixing PrOH and BuOH suspension. The superconducting critical current density($J_c$) was $1,200A/cm^2$ for the films deposited in 30% iso-PrOH and 70 % iso-BuOH suspension.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.255-260
• /
• 2000

Laser zone texture technology is widely used to enhance the tribological performance of high areal density media. This work investigates the transient process of melting and microscale surface deformation upon pulsed laser heating of Ni-P hard disk substrates by PLIC(Piecewise Linear Interface Calculation) method. The present results are compared with both the experimental and the Donor-Acceptor method results. It is found that the results from PLIC method are better than those of Donor-Acceptor method and they are in good agreements with the experimental results.

• Journal of Mushroom
• /
• v.12 no.2
• /
• pp.88-95
• /
• 2014

Auricularia auricula-judae is an edible mushroom, which is known as wood ear, free ear, black ear mushroom, and free jelly fish. This study was carried out to obtain the basic information for mycelial culture conditions of Auricularia auriculajudae. According to colony diameter and mycelial density, the media for suitable mycelial growth were PDA and MCM. The optimum temperature for mycelial growth was $25{\sim}30^{\circ}C$. Carbon and nitrogen sources were mannose and malt extract, respectively. The optimum C/N ratio was in the range of 10 to 1 with 2% glucose. Other minor components for the optimal growth were thiamine-HCl and biotin as vitamins, succinic acid and lactic acid as organic acids, and $MgSO_4{\cdot}7H_2O$ and $KH_2PO_4$ as mineral salts.

• Journal of Chest Surgery
• /
• v.7 no.1
• /
• pp.117-122
• /
• 1974

The benign tumor of smooth muscle, the leiomyoma, may arise anywhere in the body, in such tissues as the muscularis of the gut and the media of blood vessels, although by far its most common location is the uterus. Indeed, the mediastinal leiomyomas are extremely rare, especially when one excludes those arising in the esophagus. No dogmatic statements can be made with regard to age, sex distribution, symptoms, or clinical course because of the extreme paucity of cases available for evaluation. Although the majority of the reported cases are in the posterior mediastinum, thus suggesting esophageal origin. We have experienced a right inferior mediastinal leiomyoma in 36 years old housewife. She complained hemoptysis and right lower chest pain associated with intermittent low-graded fever and chillness. Routine X-ray film revealed a large irregular cystic mass density in the right lower thoracic cavity. On exploratory thoracotomy, a huge round yellow-gray colored solid mass, measured about 2.5kg in weight, was located in the right inferior mediastinum just above right hemidiaphragm, medially. The tumor mass was removed, being proved to be leiomyoma on histopathologic examination. Her postoperative course was uneventful and discharged without complication.