• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.1-5
• /
• 2005

The vector magnetic property is defined as the relationship between the magnetic field strength vector H and the magnetic flux density vector B. It is very important for the development of high efficiency and the high-density electric machines. The electrical steel sheet for the machine core shows the remarkable vector behavior by the high magnetic flux density level. In this paper, the magnetic characteristic analysis using E&S2 model is introduced as the useful technology for the design and development.

• Journal of The Korean Association For Science Education
• /
• v.12 no.2
• /
• pp.31-42
• /
• 1992

The purposes of this study were to find out the degree of formation of the concept of density for the junior high students. The changing pattern of concept in acquiring the concept of density and the degree of development of INRC transformation ability related to the concept of density were also analyzed according to cognitive level and teaching method. The results of this study were as follows. 1) The experimental group were more effective than control group in the formation of the concept of density. 2) Even though students had been taught the concept of density, the various types of preconception were remained and persisted. Especially, the students at concrete level had persisted misconceptions and these misconceptions had been changed to the other misconceptions. 3) In the degree of the formation of the transformation ability of INRC group related to the concept of density in solid phase, the experimental group developed much better on both the abilities of Reciprocal transformation, Correlative transformation and the abilities to manipulate two variables such as volume and mass than control group. 4) The correlation coefficient between GALT score and achivement of the concept of density was 0.67. The correlation coefficient between achivement of the concept of density and the formation the transformation of INRC group related to the concept of density was 0.78.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.79-80
• /
• 2016

In this study, we measured the relative density and the compressive strength in order to select the appropriate W/ B for the ultra-high strength concrete development. If W/B is lowered than the W/B of highest relative density, it was confirmed that the strength is lowered. However, if water is increased than the W/B of highest relative density, the relative density is decreased compressive strength was similar. The selection of the W/B of the lower than the highest relative density is not appropriate. Appropriate W/B is selected to be more than the maximum relative density of W/B.

• Journal of the Korean Geographical Society
• /
• v.43 no.1
• /
• pp.117-133
• /
• 2008

Although development density control has received murk attention in urban planning, there has been little research on empirical methods that can examine local changes in development density. Recently, attempts have been made to develop cellular automata (CA) models that can be applied to urban landuse change. This paper aims to develop an extended landuse change model based on urban CA considering development density. The proposed model not only includes density control component in a model framework, but also directly estimates local density changes in land use. The developed model was applied to the study area, which was a part of central Seoul. The calibration of the model was carried out over the period $1900s\sim2000s$ using parcel-based land use data and related variables The results of the calibrated model have been tested by comparison with actual landuse data, and have demonstrated that the developed model can produce realistic simulations of urban landuse changes. But model output is dependent on the spacio-temporal resolution of input data. Further research is necessary to improve the calibration procedure and methods for evaluating model validity.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.29-32
• /
• 2007

Tidal channel development is influenced by sediment type, grain size, composition and tidal current. Tidal channels are usually characterized by channel development, density and shape. Quantitative analysis of tidal channels using remotely sensed data have rarely been studied. The objective of this study is to quantify tidal channels in terms of fractal dimension and compare different inter-tidal channel patterns. For the fractal analysis, we used Box counting method which had been successfully applied to streams, coastlines and others linear features. For a study, the southern part of Ganghwado tidal flats was selected where is famous for high dynamics of tidal currents and vast tidal flats. This area has different widths and lengths of tidal channels. IKONOS and Komsat-2 MSC images were used for extracting tidal channels, and the Box counting method was applied to obtain fractal dimensions (D) for each tidal channel. Yeochari area possesses channels with linear pattern and less dense development and accordingly show low D values ranging from 1.037 to 1.038. On other hands, area (near Donggumdo and Yeongjongdo ) of dendrites channel pattern and dense development resulted in high D values from 1.2057 to 1.2667. Also, area possesses channels with linear pattern had low density about $18{\sim}24%$. Area of dendritic channel pattern had high density about $34{\sim}69%$. The difference of fractal dimensions about 0.2 according to channel development in tidal flats is relatively large enough to use as an index for tidal channel classification. Also, area where channels showed linear pattern had low density about $18{\sim}24%$. Area of dendritic channel pattern had high density about $34{\sim}69%$. Using fractal dimension and density, it would be possible to quantify the tidal channel development in association with surface characteristics.

• Applied Microscopy
• /
• v.19 no.2
• /
• pp.85-98
• /
• 1989

The ventricular myocardia of 14, 16, 18 and 20-day-old rat fetuses and newborns have been studies by light and electron microscopic morphometrics. The volume density of the myocyte and interstitial compartments as well as volume, surface and numerical density of nuclei were estimated by light microscopic morphometrics. Whereas, the volume density of myofibrils and glycogen granules as well as the volume, surface and numerical density of mitochondria were assessed by electron microscopic morphometrics. The volume density of myocyte compartment of the ventricular myocardia in developing fetuses decreased, but increased in newborn rats. On the other hand, the volume density of the interstitial compartment increased in growing fetuses and decreased in newborns. In all groups the volume, surface and numerical density of nuclei decreased gradually with elongation of myocytes. Conversely, the volume, surface and numerical density of mitochondria and volume density of myofibrils and glycogen granules in ventricular myocytes incresed. The increase in numerical density of mitochondria probably reflects an increase in metabolic activity. Sarcomere length also increased during development.

• Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.123-129
• /
• 2011

To determine whether rearing density affects the hypermelanosis on the blind side (ambicoloration) of olive flounders Paralichthys olivaceus, we reared fry with an unpigmented non-eyed (blind) side in duplicate at densities of 150 individuals/$m^2$ (commercial production density: control) and 450 individuals/$m^2$ (high density group) for 90 days in 1-t dark-green fiberglass reinforced plastics (FRP) tank. We recorded feed intake, feed conversion efficiency (FE), growth and survival, and measured the ratios of staining blind-side area (staining area) and ambicolored fish every 30 days. Daily feed intake (DFI), feed conversion efficiency (FE), growth rate, condition factors, and survival rate were calculated at the end of the experiment. Although the FE was higher in the high-density compared to the control, the two density groups showed similar feed intakes, growth, and survival. The ratio of staining area as well as the ratio of ambicolored fish significantly were significantly higher in the high-density group than in the control from days 30 to 60, but significantly increased and evened out by the end of the experiment (P<0.05). In conclusion, we determined that rearing density is not the main cause of the blind-side hypermelanosis, but found that increasing the rearing density can accelerate the ambicoloration in olive flounders.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.256-259
• /
• 2003

In this paper describes the development testing results of high density High Voltage Power Supply(HVPS) that employ microwave TWTs. The HVPS consist of number of modules connected in series. A new design that adapt resonant circuit and high density pulse transformer to the high voltage modules makes the HVPS much more reliable. Also High voltage Solid-State modulation using fast switching devices(FET's) and the test results of modulator modules development are represented.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.9
• /
• pp.468-474
• /
• 2003

This paper describes the development of an open frame type high power density switching converter. It is based on the active clamp forward converter with synchronous rectifier, and packaged by using the open frame and multi-layer printed circuit board (PCB) technology to achieve the higher power density. Furthermore, the windings of transformer and inductor are also realized by multi-layer PCB so that it also contributes to achieve higher power density. Through the experiment on the prototype converter of 50[W], it is confirmed that power density of 50[W/i$n_3$] and maximum efficiency of over 91[%] are obtained.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.259-265
• /
• 2008

This research starts from the questioning of current housing development situation on hilly sites in Korea. It aims to investigate various design techniques of row-rise housing as an alternative housing type on hilly sites. Several generic solutions are proposed by considering the density of dwelling, parking plans, exterior space and access patterns, making full use of geographical features of hilly site and existing facilities. In order to promote development feasibility of proposed plans, the efficiency of the proposed techniques are verified in terms of development density, enhancement of community space, habitability of housing.