• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.150-155
• /
• 2003

Fractures in the form of micro cracks are commonly found in natural rocks. A rock behaves in a complex way due to fracture; in particular, the anisotropic strength of a rock material is significantly influenced by the presence of these fractures. Therefore, it is essential to understand the failure mechanism of a fractured rock. In this study, a fractured rock is formulated in terms of fabric tensor based on geometric and mechanical simplifications. In this way, position, density and shape of fractures can be determined by the fabric tensor so that rocks containing multi-fractures can successfully be modeled. Also an index to evaluate the degree of anisotropy of a fractured rock is proposed. Hence, anisotropic strength of a rock containing fractures under uniaxial compression condition is estimated through a series of numerical analyses for the multi-fractured model. Numerical investigations are carried out by varying the fracture angle from $0^{\circ}\;to\;90^{\circ}$ and relationship between uniaxial compression strength and the degree of anisotropy is investigated. By comparing anisotropic strength of numerical analysis with analytic solution, this study attempts to understand the failure mechanism of rock containing fractures.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.139-143
• /
• 1991

GRIN-SCH quantum well structured Laser Diode were fabricated using MOCVD and operated as CW at room temperature. The threshold current density of the LD with 670${\mu}{\textrm}{m}$ cavity length was 530 A/$\textrm{cm}^2$. For the ridge waveguide type index guiding structured LD with 6${\mu}{\textrm}{m}$ stripe width and 240${\mu}{\textrm}{m}$ cavity length, the threshold current was 50㎃. The maximum differential quantum efficiency was 0.95W/A when the optical output was 60mW. The lasing wavelength of QW LD was 865nm. In the L-I measurement. TE mode was superior to TM mode. From the near field pattern, single lateral mode operation was observed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.191-198
• /
• 2010

The noise by the construction activities is one of the main issues in Korea. To prevent the noise from construction site, construction company installs temporary noise barriers along the construction site boundary. Normally sound insulation performance ($R_w$) of the temporary noise barriers made by metal or plastic is between 18 and 31 dB and metallic noise barriers are around 5 dB higher than plastic noise barriers. Sound absorption performance (NRC) of the temporary noise barriers are between 0.20 and 0.59 so it's difficult to characterize their acoustic performance. In this study, it has founded that sound insulation performance of the temporary noise barrier has been improved about 3dB by stick the high density acoustic sheet and insertion loss of noise barrier is getting increased as the source and receiver approached the temporary noise barriers.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.32.3-32.3
• /
• 2018

We report a possible discovery of a relic of a dissolved star cluster in the Sextans dwarf spheroidal galaxy. Using the hk index (${\equiv}$(Ca-b)-(b-y)) as a photometric metallicity indicator, we have successfully discriminated the metal-poor and metal-rich stars in the galaxy and found an unexpected number density peak of metal-poor stars near the galaxy center. The analysis of color-magnitude diagrams reveals that they appear to be originated from an old, metal-poor globular cluster which might be slightly farther than the bulk of field stars in the galaxy. This supports the presence of the star cluster remnants in the galaxy which have been suggested by previous studies. If confirmed, dissolution of a star cluster provides a piece of evidence of a cored dark-matter halo profile for the Sextans dwarf galaxy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.15-21
• /
• 1983

In this paper, the theoretical analysis of lateral guiding mechanism in stripe geometry Double Heterojunction Laser Diode is performed. In the analysis, the spatial variations of gain form refractive index profile are modeled by the mathematical form of injected current density and the beam width variations dependence of active layer, stripe width & cavity length have been analyzed by perturbed mode equation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.55-62
• /
• 1983

The error rate performance of phase shift Keyed(PSK) signal has been evaluated in terms of carrier-to-noise ratio(CNR), carrier-to-interferer ratio(CIR), impulsive index, and the phase difference between signal and interferer in the environment of cochannel PSK inter-ference and impulsive noise. We hays derived a general equation of the probability density function (p.d.f.) of output of coherent phase detector. And the error rate of the received binary PSK(BPSK) signal has been numerically evaluated. The graphic results show us that the best case is the situation of the signal and the inter- ferer meet with orthogonal phase.

• The Korean Journal of Ecology
• /
• v.6 no.1
• /
• pp.45-54
• /
• 1983

A distribution map of black pine, Pinus thunbergii, in south Korea was prepared through field surveys. According to Mirov(1967), the range of black pine is limited in east Asia, Japan and Korea; its northern limit is at about 41。34' north and its southern limit on Takara island, south Kyushu, at 29。 north. According to the present map, its northern limit coincided with the isopath of warmth index 100 by Yim(1977). The density of pine in grid mesh, about 4 km * 4 km, was higher at costal area than that in inland area, and it was also higher at sea side slope than the opposite slope of the same mountain. This suggests that the ecological distribution of black pine is greatly affected by salt content of the soil or the optimal range of summed temperature for the pine growth.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1428-1430
• /
• 1996

Thin Silicon oxynitride(SiON) films have been chemically deposited using 193nm ArF Excimer Laser CVD, with $Si_{2}H_{8}$, $N_{2}O$, and $NH_3$ as the reactive gases and $N_2$ as the carrier gas. Experimental results show that deposition rate and refractive index have a strong dependence on substrate temperature, chamber pressure, gas ratio, laser power and laser beam height. Electrical characterization of oxynitride films demonstrates that for $NH_{3}/N_{2}O$ flow ratios ranging from 0.25 to 1, the leakage currents, the interface trap density and the capacitances (dielect ric constant) increase and the dielectric breakdown fields decrease

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.395-397
• /
• 1995

To investigate the effects of solvent extraction on electrical properties of LDPE, charge distribution, electrical conduction, and FT-IR experiments are carried out for three kinds of LDPE which are same for melt index (MI) and density. The effects of short chains for the charge distribution are quite different. For the electrical conduction, the electrical conduction mechanism remains unchanged, as the solvent extraction temperature is increased.

• Particle and aerosol research
• /
• v.8 no.2
• /
• pp.75-81
• /
• 2012

The strength of lumped cokes can be represented by some index numbers. Although some indexes are suggested, these indexes are not enough to enlighten fracture mechanism. To find essential mechanism, a computational way, discrete element method, is applied to the uniaxial compression test for cylindrical specimen. The cylindrical specimen is a kind of lumped particle mass with parallel bonding that will be broken when the normal stress and shear stress is over a critical value. It is revealed that the primary factors for cokes fracture are parallel spring constant, parallel bond strength, bonding radius and packing ratio the parallel bond strength and radius of the parallel combination the packing density. Especially, parallel spring constant is directly related with elastic constant and yield strength.