• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.106-111
• /
• 1999

To investigate the effects of planting density and nitrogen level on growth and yield potential of newly bred heavy panicle japonica rice with large grain (Iksan 435 and Iksan 438) or many spikelets per panicle(HR14022-21-8-4 and HR14022-21-8-6), four heavy panicle type rices and two many panicle type rices(Dongjinbyeo and Donganbyeo) as the checks were planted under standard planting density (30$\times$15 cm) and dense planting density (15$\times$15 cm) with two nitrogen levels of standard nitrogen level(110 kg h $a^{-1}$) and heavy nitrogen level(165 kg h $a^{-1}$). Effective tiller rate decreased in dense planting or heavy nitrogen, when compared to standard nitrogen and planting, while leaf area index and to dry weight increased in dense planting or heavy nitrogen. Tiller numbers and panicle numbers were more increased by dense planting than heavy nitrogen, whereas spikelet numbers were more increased by heavy nitrogen than dense planting. Ripened grain ratio was slightly lower only in dense planting. 1,000 grain weight in brown rice was not significantly different in dense planting or heavy nitrogen. Milled rice yield was highest in heavy nitrogen with standard planting for heavy panicle type rice, while yield for many panicle type rice was highest in heavy nitrogen with dense planting, suggesting that many panicle type rice possesses higher adapt-ability for dense planting than heavy panicle type rice. Path coefficient analysis revealed that top dry weight, spikelet number and grain weight were the greatest positive contributors to yield, whereas tiller number was negative to yield.d.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5345-5349
• /
• 2012

Recently obesity from the child until being early in the adult, there is to an increase tendency. The obesity influences to various metabolicdisease and there is a possibility of an effect in relationship disease of the heart, brain vascular system etc. This research analyzed the interrelation -ship of apolipoprotein AI consistency and body mass index. It used spss 19.0 with t-test and a regression analysis. Analytical result the interrelationship of apolipoprotein AI and body mass index was -0.484 (p=0.01). The high density cholesterol was 0.89 (p=0.01). The trigriceride was -0.88 (p=0.01). Free fatty acid were not interrelationship. Conclusively, interrelationship of apolipoprotein AI and body mass index was not high. Encourage to examine trigriceride or cholesterol and prevent Arteriosclerosis.

• Journal of the Korean Dietetic Association
• /
• v.22 no.2
• /
• pp.88-105
• /
• 2016

This study investigated anthropometric and biochemical characteristics, food and nutrient intakes, and changes in body mass index (BMI) of Korean middle age men (40~49 yrs). Data on BMI, anthropometric (height, weight, waist circumference, body mass index, blood pressure), and biochemical (total cholesterol, HDL-cholesterol, LDL-cholesterol, triglyceride, hemoglobin, GOT, GPT) characteristics, food and nutrients intakes, nutrient density, and index of nutrient quality were obtained from the Fifth Korea National Health and Nutrition Examination Survey (KNHANES, 2001, 2005, 2011). Subjects were divided into three groups by year. Weight, BMI, and hemoglobin increased significantly by year. All anthropometric factors except height showed a positive relation with BMI by year. Consumption of barley, chinese noodle, confections, soybean milk, egg, ice cream, pizza, fried foods, banana, coffee, and raw rice wine increased significantly by year. Intake ratios of nutrients except water and fiber were over 100% of KDRI generally. INQ according to intakes of protein, calcium, phosphorus, iron, vitamin A, thiamine, riboflavin, and niacin per 1,000 kcal increased significantly by year. Distribution of BMI status of subjects showed a significant difference by exercise. The findings of the present study show that BMI of subjects increased by year, and intakes of all nutrients except calcium and riboflavin showed aspects of overnutrition by year. Intakes of fruits decreased while intakes of raw rice wine and coffee increased by year. Therefore, practical and systematic nutrition programs are required to maintain optimum BMI and appropriate intakes of nutrients to maintain a desirable lifestyle and improve dietary life.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.57-65
• /
• 2011

The composition of species for each community of Quercus by vegetation and soil survey, the community classification by TWINSPAN, the structural characteristics of communities were used and analyzed during the period of 2000~2004 for Quercus mongolica forest. And the resulting suggestions for a subsequent planting model for forest are as follows. The Quercus mongolica community had the highest importance value for Quercus mongolica followed sequentially by Acer pseudosieboldianum, Acer mono, Rhododendron schlippenbachii, Tilia amurensis, Fraxinus rhynchophylla, and Fraxinus sieboldiana. As a result of suggesting a planting modeling for the Quercus mongolica communities in the areas with the warmth index of both $60.90{\sim}79.79^{\circ}C$ and $53.96{\sim}64.82^{\circ}C$, Quercus mongolica was absolutely dominant in case of the subtree layer for the accompaniment species of distribution in the planting modeling by tree layer in the two areas depending on the warmth index, while there were distinct differences shown in case of the lower tree layer. While Acer pseudosieboldianum, Tilia amurensis, Fraxinus rhynchophylla, Sorbus alnifolia, Acer mono, etc. were appeared in the subtree layer for the areas with the warmth index of $60.90{\sim}79.79^{\circ}C$. Cornus controversa, Quercus mongolica, Fraxinus sieboldiana, etc. were many appeared in the subtree layer for the areas with the warmth index of $53.96{\sim}64.82^{\circ}C$. And, when we made ecological Quercus mongolica community, subtree layer planting is different by warmth index.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.88-98
• /
• 1999

A refractive index modulated (RIM) DFB laser, in which the refractive index of a center region of the upper cladding layer comprising the grating region is different from that of side regions, is proposed to obtain and effective ${\lambda}$/4 phase shift in the center region. Since the coupling coefficient of a center region in a RIM-DFB laser is larger than that of side regions, a RIM-DFB laser has the effect of a distributed coupling coefficient. Simulation results show that RIM-DFB lasers have better operation characteristics - more uniform photon density profile, less SHB effect, and better single mode operation at high injection currents - compared to those of ${\lambda}$/4 phase-shifted DFB lasers and CPM-DFB lasers. In addition, the effect of the center region on the above threshold characteristics of a RIM-DFB laser is investigated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.311-318
• /
• 2002

Planting date of soybeans [Glycine max (L.) Merr.] is one of production components in cultural systems. The objective of the current study was to identify the components of soybean production and cultural practices encompassing planting dates and cultivars that respond to dry matter accumulation, harvest index and yield components. Three determinate soybean cultivars were planted on May 13 (early), June 3 (mid), and June 24 (late). Planting density was 60$\times$15cm with 2 seeds (222,000 plants per ha). Soybean plants were sampled every 10 days interval from the growth stages of V5 to R8 and separated into leaves including petioles, stems, pods, and seeds. Dry matter accumulations, harvest indices, and yield components were measured. Early planting had taken 55 days from VE to R2 and late planting taken 39 days indicating reduced vegetative growth. Early planting showed higher leaf, stem, pod and seed dry weights than late planting. However, late planting appeared to be higher harvest index and harvesting rate. Vegetative mass including leaf and stem increased to a maximum around R4/R5 and total dry weight increased to a maximum around R5/R6 and then declined slightly at R8. The highest seed yield was obtained with mid planting and no difference was found between early and late plantings. Cultivar differences were found among planting dates on growth characteristics and yield components. The results of this experiment indicated that soybean yield in relation to planting dates examined was mainly associated with harvest index and harvesting rate, and planting date of cultivars would be considered soybean plants to reach the growth stage of R4/R5 after mid August for adequate seed yield.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2073-2081
• /
• 2002

In product design and manufacturing, axiomatic design provides a systematic approach for the decision-making process. Two axioms have been defined such as the Independence Axiom and the Information Axiom. The Information Axiom states that the best design among those that satisfy the independence axiom is the one with the least information content. In other words, the best design is the one that has the highest probability of success. On the other hand, the Taguchi robust design is used in the two-step process; one is "reduce variability," and the other is "adjust the mean on the target." The two-step can be interpreted as a problem that has two FRs (functional requirements). Therefore, the Taguchi method should be used based on the satisfaction of the Independence Axiom. Common aspects exist between the Taguchi method and Axiomatic Design in that a robust design is induced. However, different characteristics are found as well. The Taguchi method does not have the design range, and the probability of success may not be enough to express robustness. Our purpose is to find the one that has the highest probability of success and the smallest variation. A new index is proposed to satisfy these conditions. The index is defined by multiplication of the robustness weight function and the probability density function. The robustness weight function has the maximum at the target value and zero at the boundary of the design range. The validity of the index is proved through various examples.gh various examples.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.1
• /
• pp.63-71
• /
• 2015

Objectives: The purpose of the study is to investigate the relationship between bone mineral density and remaining teeth in Korean adults. Methods: Using National Health and Nutrition Examination Survey(KNHANES) 5th Year 1(2010), 1,985 adults over 50 years old having bone mineral density test were selected. Male adults were 883, and female adults were 1,102. The raw data consisted of general characteristics of the subjects, bone density data, and oral examination data. The questionnaire consisted of general health survey, laboratory examination study, and nutrition study. Data were analyzed using SPSS 18.0 program for multiple regression analysis, ANOVA, t-test. The variables included general characteristics of the subjects, health behavior, diet habit, and oral health behavior. General characteristics consisted of gender, age, residence area, education level, marital status, monthly income, and vocation. Health behavior consisted of smoking, alcohol drinking, body mass index(BMI), physical activity, and mental health. Diet habit consisted of frequency of meal, milk, coffee, and calcium ingestion. Oral health behavior consisted of frequency of tooth brushing, use of oral health care devices, and oral examination. Systemic diseases were measured by the questionnaire for hypertension, diabetes mellitus, and hyperlipidemia. Bone density was measured in T-score of femoral bone, neck of femur, and lumbar vertebrae. Bone density was classified into normal($T-score{\geq}-1.0$), osteopenia(-2.5 < T-score < -1.0), and osteoporosis ($T-score{\leq}-2.5$). The remaining teeth were measured by the differences between normal teeth and missing teeth. Results: Smoking and age are the most influencing factors on the number of remaining teeth and bone density(p<0.01)(p<0.05). Those who had higher bone density, younger age, and nonsmoker significantly had more remaining teeth. Those who were men, diabetic, lowly educated women, and low birth weighted persons tended to have less number of teeth(p<0.01). Conclusions: The study suggested that there were significant differences between men and women according to the oral health management behavior and systemic disease control. Proper management of the oral health and good quality of bone mineral density can reserve the remaining teeth through the whole life.

• Proceedings of the KSCN Conference
• /
• 2005.10a
• /
• pp.64-64
• /
• 2005

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2006

Samples of kenaf (Hibiscus cannabinus) grown in Malaysia were examined to determine the kraft pulp and paper-making properties of their bast (or bark) fibers. Using kraft pulping process showed that bast fibers were relatively easy to cook resulting good pulp yields in the range of 45-51 %. The bast pulp produced sheets with great density, tear index and dry zero-span breaking length. Kenaf bast fiber is considered promising for production of high-grade printing, writing and specialty papers.