• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.90-97
• /
• 2003

The purpose of this study is to understand the dissipation pattern of excess pore pressure after liquefaction which governs the post-liquefaction behavior of liquefied sand deposits. 1-g shaking table tests were carried out on 5 different kinds of sands, all of which had high liquefaction potentials. During the tests excess pore pressure at various depths, and surface settlements were measured. The measured curve of the excess pore pressure dissipation was simulated using the solidification theory, and from the analysis of the velocity of dissipation, the dissipation pattern of excess pore pressure after liquefaction was examined. The dissipation velocity of excess pore pressure after liquefaction had a linear correlation with the effective grain size ( $D_{10}$) divided by the coefficient of uniformity ( $C_{u}$), and the increase in the initial relative density of the ground played a role in shifting this correlation curve toward an increased dissipation velocity. From the correlation, an approximate method was recommended for prediction of the dissipation curve of excess pore pressure after liquefaction in saturated sand deposits.s.s.

• Journal of the Korean Regional Science Association
• /
• v.35 no.4
• /
• pp.33-45
• /
• 2019

Due to the global low growth trend, urban shrinkage is a major issue of urban policy in major industrialized countries. According to the research results of the KRIHS(Korea Research Institute for Human Settlements, 2016), 23 out of 77 cities in Korea were diagnosed as continuous or temporary shrinking cities. However, the criterion for diagnosing shrinking cities remain on the simple demographic side, and the spatial shrinkage pattern of the city is not considered. Therefore, this study diagnosed urban shrinkage phenomenon considering the characteristics of Yeong-ju, a poly-centric city, by using the population gradient curve, which is one of the urban spatial structure analysis methods. As a result of the diagnosis, Yeong-ju turned out to be a shrinking city with the population density and the slope of population density increasing. In the case of area of Dong, a sprawl phenomenon in which the population density of the CBD and the slope of the population density were decreased was shown. And in the case of Punggi-eup, a simple shrinkage phenomenon in which only the population density of the CBD was decreased was shown. The results show that even within a city, the pattern of spatial change can be different for each centers. In the case of a city with a poly-centric structure, the implications for the individual diagnosis of not only the entire city but also the detailed area were drawn.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.422.2-422.2
• /
• 2016

스마트폰, 태블릿 등의 디바이스의 발전에 따라 휴대성이 매우 중요해졌다. 디바이스의 크기, 두께, 유연성에 관한 연구가 활발히 진행되고 있으며, 그 중에서도 energy storage device의 flexibility를 향상시키는 연구가 주목 받고 있다. Energy storage device의 성능 향상을 위해서는 power density를 높여야 하며 flexibility를 위해서는 전극판과 전극소재 간의 부착력을 증가시켜야 한다. 본 연구에서는, power density와 소재 간의 부착성을 개선시키기 위해 기존 graphene보다 표면적이 넓으며 power density가 좋고 전극판과의 부착성이 좋은 hybrid GNP-CNT를 사용하였다. 그리고 Ag NWs/CNT PET film 을 사용하여 전도성이 있는 flexible한 전극판을 사용하였다. SEM 측정을 통해 표면 분석을 하였고, sample에 패턴을 하고 Bending test를 하여 부착성을 확인하였다. 또한, CV curve를 측정하여 supercapacitor의 특성을 확인하였다. 향후, $MnO_2$ NWs를 hybrid GNP-CNT에 합성시킴으로 energy storage device의 energy density를 더욱 향상시키는 연구를 진행할 것이다.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.56-58
• /
• 1996

The Preisach model needs a density function to simulate the hysteresis phenomena. To obtain this function, many experimental data obtained from the first order transition curves are required to get accurate density function. However, it is difficult to perform this procedure, especially for the hard magnetic materials. In this paper, we compare the density function obtained from the experimental data with that computed from the mathematical function like the Gaussian function, and propose a simple technique to get mathematical equation of the density function or Everett function which is obtained from the initial curve, major and minor loop.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.17-24
• /
• 2004

Surrface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

• Journal of the Optical Society of Korea
• /
• v.15 no.4
• /
• pp.321-328
• /
• 2011

Various methods have been investigated to increase photon density in soft tissue, an important factor in low-level laser therapy. Previously we developed a compression-controlled low-level laser probe (CCLLP) utilizing mechanical negative compression, and experimentally verified its efficacy. In this study, we used Bezier curves to numerically simulate the skin deformation and photon density variation generated by the CCLLP. In addition, we numerically modeled changes in optical coefficients due to skin deformation using a linearization technique with appropriate parameterization. The simulated results were consistent with both human in vivo and porcine ex vivo experimental results, confirming the efficacy of the CCLLP.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.125-136
• /
• 1997

The fullsized drawbar pull test is carried out in Yeog-gol area to find out the effect of test vehicle's trafficability with the variation of density and water content at the weathered granite soils and water content at the clayey soils. According to the results, it is found that the behavior of optimum drawbar pull is effected not only by water content but also by density. This paper showed the method of determination of optimum points at a curve of drawbar pull varying with the conditons of soils. And it also showed the optimum drawbar pull coefficient and optimum slip varying with the density of the weathered granite soils.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_4
• /
• pp.181-187
• /
• 2001

This study was carried out to measure the variations of potential and current density with polymers. The results were particularly examined to identify the influences on potential and rate of various factors including temperature and pH. The Tafel slope for anodic dissolution was determined by the polarization effect depending on these conditions. The optimum conditions were established for each case. The second anodic current density peak and maximum current density were designated as the relative polarization sensitivity$(I_r/I_f)$. The mass transfer coefficient value$(\alpha)$ was determined with the Tafel slope for anodic dissolution based on the polarization effect with optimum conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.136-145
• /
• 1997

To analyzed ride quality and to predict durability in vehicle dynamics, it is essential to describe a road surface profile precisely. This paper presents a technique to generate road surface profiles in a spatial domain by using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis, The derived road surfaces are compared to ISO(International Organization for Standardization) standards and classifications, proposed by the MIRA(Motor Industry Research Association). The methodology in this paper is also proposed to generate road roughness description with a limited external data. A small amount of external curve data is combined with an internal PSD function to generate road surface roughness in a spatial domain.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.323-328
• /
• 2007

We derived the dispersion curves and spectral density for several models constructed from physical property data of representative geology in Korea. Comparison between monopole and dipole sources, between physical properties, and between dispersion curves and spectral density maps have been made. The result was very helpful in sonic data acquisition as well as velocity determination.