• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.232-235
• /
• 1998

In this paper, we present the modified blind adaptive multiuser detector based on Constant Modulus Algorithm(CMA) for the demodulation of code-division multiple-access(CDMA) signals. Convergence issues are treated, and the performance of three algorithms is compared via computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.54.4-54
• /
• 2002

1.Introduction 2. Channel Equalizer Using Adaptive Neural Network 3. Data Modulation and Demodulation Using Haar Transform 4. Binary Signal Transmission Using Haar Transform 5. Conclusion

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.291-292
• /
• 2008

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.60-67
• /
• 2007

A signal conditioning circuit for capacitive displacement sensors was developed using a high frequency modulation/demodulation method, and its performance was evaluated. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. The developed signal processing circuit consists of three parts: linearization, modulation/demodulation, and nonlinearity compensation. Each part was constructed discretely using several IC chips and passive elements. An evaluation system for precision displacement sensors was developed using a laser interferometer, a precision stage, and a PID position controller. The signal processing circuit was tested using the evaluation system in the respect of resolution, repeatability, linearity, and so on. From the experimental results, we know that a highly linear voltage output can be obtained successfully, which is proportional to displacement and the nonlinearity of output is less than 0.02% of full range. However, in the future, further investigation is required to reduce noise level and phase delay due to a low-pass filter. The evaluation system also can be applied effectively to calibration and evaluation of precision sensors and stages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.810-819
• /
• 2007

The I/Q unbalance which is generated by non-ideal components such as a $90^{\circ}$ phase shifter and I/Q filters is an inevitable physical phenomenon and leads to performance degradation when we implement a coherent two-dimensional (2-D) modulation/demodulation system. This paper provides an exact and general expression for the SEP(symbol error probability) of DVB-S2 system with I/Q phase and amplitude unbalance over AWGN channel. Coordinate rotation and shift techniques used to redefine a received signal are key mathematical tools. In conclusion, the derived result is expressed as a linear combination of the 2-D Gaussian Q-functions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.7-13
• /
• 2011

A mixed-mode QPSK demodulator for 60-GHz wireless personal area network application is demonstrated. In this work, mixed-mode QPKS demodulation scheme achieving low power consumption and small area is employed. The prototype chip realized by 60-nm CMOS Logic process can demodulate up to 4.8-Gb/s QPSK signals at 4.8-GHz carrier frequency. At this carrier frequency, the demodulator core consumes 54 mW from 1.2-V power supply while the chip area is $150{\times}150{\mu}m^2$. Using the fabricated chip, transmission and demodulation of 1.7-GSymbol/s QPSK signal in 60-GHz link is demonstrated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.86-91
• /
• 2010

We constructed a quasi-distributed fiber-optic sensor network for the safety monitoring in power systems. It is possible to construct many of FBG sensors in a line and to be immune from electromagnetic noise. For demodulation analysis of reflected wavelength from FBG sensor, we proposed a simple and fast system using a InGaAs photo-diode array and a holographic diffraction grating. For accuracy improvement of the proposed demodulation system, we applied a Gaussian line-fitting algorithm. We obtained about 4[pm] of wavelength resolution and stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.573-581
• /
• 2014

We proposed a hopping phase estimator to demodulate the received signals without any hopping information in frequency hopping spread spectrum systems. The demodulation process in this paper is as follows: hopped frequency tracking is accomplished by choosing a frequency component with maximum amplitude after taking discrete Fourier transform and a hopping frequency estimator which estimates the phase generated by hopped frequency is established through difference product and down-sampling. We obtained the probability density function and variance performance of the proposed estimator and confirmed that the analysis and the simulation results were agreed with each other.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1326-1331
• /
• 2001

This paper has been studied about design of a transceiver for data transmission. The transceiver has bandwidth of 424.7~424.95 MHz and uses half duplex communication method, PLL synthesized, 20 channel, 12.5 KHz channel bandwidth and FSK modulation/demodulation method. The transmission set is designed using low noise amplifier and power amplifier Also, it consists of low pass filter and resonation circuit for decrease of spurious signal. The receiver set is designed using dual conversion method. Finally, the transceiver set achieves the following characteristics 9.71dbm output power, 47dbc spurious property and $\pm$12.3 Jitter at sensitivity of -1134dbm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.202-211
• /
• 2001

This paper deals with an analysis of multipath which affect a transmission performance in underwater acoustic channel. Underwater acoustic channel with multipath structure is introduced to mathematical modelling for a basin environment. In this paper, SMR(Signal to Multipath Ratio) which is defined as a parameter of multipath's effect is presented as a mathematical equation, and the equation of SMR is simulated by MATLAB program. Furthermore, this paper is also dealt with an implementation of modulation and demodulation system for acoustic transmission. Acoustic Transmission is limited by frequency bandwidth, so $\pi/4 QPSK$(Quadrature Phase Shift Keying) methods which is very useful at frequency ]imitation and FM(Frequency Modulation) are used at acoustic communication system. This implemented hybrid modulation/demodulation system is used as an analog board of image transmission system. In this system, adaptive equalization for reducing the multipath effect and baseline JPEG used for an image compressing are also stated.