• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.72-78
• /
• 2004

In this paper, a development of an inductive position sensor is described. The sensor is similar to a radial magnetic bearing in that the sensor stator is shaped like a heteropolar magnetic bearing and is driven by a switching amplifier. A demodulation filter extracts the gap information from the switching current ripples. A prototype sensor exhibits the resolution of $0.43\mum$ and the dynamic bandwidth of about 800Hz. The dynamic performance can be improved by increasing the switching frequency. However, the eddy current effects become noticeable at high switching frequency, thus limiting the improvement of the bandwidth.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.75-82
• /
• 2013

We propose a fiber grating sensor system for condition monitoring of large scale wind turbine blades. For the feasibility test of the proposed sensor system, a down-scaled wind turbine has been constructed and experimented. Fiber grating sensors were attached on a blade surface for distributed strain and temperature measurements. An optical rotary joint was used to transmit optical signals between the FBG sensor array and the signal processing unit. Instead of broadband light source, we used a wavelength-swept fiber laser to obtain high output power density. A spectrometer demodulation is used to alleviate the nonlinear wavelength tuning problem of the laser source. With the proposed sensor system we could measure dynamic strain and temperature profiles at multi-positions of rotating wind turbine blades.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.485-489
• /
• 2000

본 논문에서는 단일 PLL을 사용하여 400MHz 대역의 트랜시버를 구현하였다. 일반적인 트랜시버의 경우, 송수신부에 각각 한 개의 PLL과 수신부에 2단의 믹서를 사용하여 구현되어진다. 이러한 구성은 트랜시버의 가격과, 부피에 상당히 큰 영향을 미친다. 본 논문에서는 기존의 방식을 탈피하여 단일 PLL방식의 데이터 전송용 특정 소출력 무선기기의 송, 수신단의 회로설계, 제작 및 특성측정을 하였다. 설계된 트랜시버의 주파수 대역은 424.7-424.95MHz이고, Low Side Injection방식을 사용하여 450KHz의 If 주파수로 변환(Conversion)하였고, 반이중(Semi duplex Communication) 통신방식, PLL Synthesized, 21 Channel, 12.5KHz Channel BandwidttL FSK Modulation / Demodulation 방식을 사용하였다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.3
• /
• pp.108-111
• /
• 2002

This paper proposes an new water mark embedding and extraction technique which extends the direct sequence spread spectrum technique. The proposed technique approximates the complexity of image and block in spatial domain using Laplacian filtering and watermark is adaptively embedded in the mid-frequency DCT components. Local parity bits are attached to higher-frequency DCT components and they are used to detect extraction errors and correct those errors. In extraction process the proposed method boosts the higher frequency components of image and extracts the watermark by demodulation and this information is verified and adjusted by parity bits. Experimental results show it is invisible and robust to several external attacks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.433-437
• /
• 2000

본 논문에서는 데이터 전송용 특정 소출력 무선국용 무선기기의 송수신단의 회로를 설계하고 제작하여 특성을 측정하였다. 주파수 대역은 424.7~424.95MHz이고, 반이중(Half Duplex Communication) 통신방식, PLL Synthesized, 20 Channel, 12.5kHz Channel Bandwidth 그리고 FSK Modulation/Demodulation 방식을 사용하였다. 송신단은 저잡음 증폭기와 전력증폭기를 사용하여 10mW의 출력으로 설계하였고, 발생되는 스퓨리어스를 감쇄시키기 위해 저역통과필터와 공진 회로로 구성하였다. 수신단은 Dual Conversion 방식을 사용하였다. 설계한 결과, 송신단의 출력은 9.71dBm, 스퓨리어스특성 47dBc 그리고 수신단은 감도가 -113dBm에서 Jitter가 $\pm$12.3%로 나타났다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.755-761
• /
• 2015

Satellite Air-defence Warning System receives the aircraft/ballistic track information and air defense control command obtained from Master Control & Reporting Center (MCRC) and Air Missile Defence Cell (AMD Cell) Systems. It consists of terminal and control system to propagate track information and air defense control command control via the military satellite communications. In this paper, there were described track information, air defense control command, the frame structure of modem to transmit a voice information and modulation/demodulator design, network synchronization methods via the satellite network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2329-2338
• /
• 1997

A conventional digital receiver sampled a baseband signal and processed it digitally for demodulation. But now we can sample at sufficiently high speed a wideband signal to take enough discrete data values due to the advent of economic high-speed ADC. With this technical background, a wideband frequency-division-multiplexed signal can be undersampled and channelized in digital domain by DFT analysis filter using the theory of polyphase. In this paper, we propose a new digital receiver which can digitally process the multichannel received signal by sampling at IF band, develop a mathematical theory and algorithm, and analyze the performance by using C-language simulaation. The proposed receiver can demodulate analog and digital FM signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1349-1355
• /
• 2004

In tile wireless communication networks although the modulation and demodulation structure with proposed BOWLIS algorithm is a little confusing but we certified that it is fit structure in fast operation processing and high speed wireless LAM system that is more strong on frequence and electro magnetic interference because it process the inputted data within 2.8Us that is faster 0.4Us than 3.2Us in standard form. Also we certified that in the sigtlt of consuming power it is better than pipe-lined structure because of reducing the processing step to 4.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.122-127
• /
• 2016

In this paper, new spectrum sensing schemes based on analog/RF front-end processing are introduced for IoT wireless sensor networks. While the conventional approaches for wireless channel cognition have been issued in signal processing area, the RF spectrum cognition concept makes it feasible to achieve cognitive wireless sensor networks (C-WSNs). The spectrum cognition at RF processing is categorized as four kinds of sensing mechanisms. Two recent reseaches are described as promising candidates for the C-WSN. One senses spectrum by the frequency discriminating receiver, the other senses and detects from the frequency selective super-regenerative receiver. The introduced systems with simple and low-power RF architectures play dual roles of channel sensing and demodulation. simultaneously. Therefore, introduced spectrum sensing receivers can be one of the best candidates for IoT wireless sensor devices in C-WSN environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.113.3-113
• /
• 2001

In this paper, we have designed the VHDL module of DS/SS QPSK wireless modem processor for digital data communication. The spread spectrum method is used for modern processor, because this method guarantees good frequency efficiency and higher security. Also, it guarantees good performance in digital communication system under multi-path interferences. The differential encoder and decoder are used for simple circuit composition in the signal detection. For the synchronization of receiver, matched filter and power detector are used. And the IF modulation/demodulation of QPSK method is used in the digital level. The transmitter of VHDL modem processor consists of differential encoder, PN code generator, and QPSK ...