• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1796-1803
• /
• 2015

While considering the current scenario, in this world power demand goes on increases day by day. Frequent power outages occur in high voltage transmission line due to the deprived performance of polluted insulators; this affects overall operation of power system and may indirectly impinge on the growth of production sector. Many researchers are keenly taking efforts to provide highly reliable and stable power to neediest. In this paper, A.C pollution flashover performance of disc type glass insulator and composite long rod insulators investigation under various artificial pollutions by varying Equivalent Salt Density Deposition (ESDD) levels. Here, we use different types of pollution methods like binding method, dipping method and spraying methods with different types of pollutants concentration. Based on dimensional analysis, four different Mathematical models have been developed to predict the A.C pollution Flashover Voltage (FOV) of insulators. Both the experimental and mathematically modeled results are compared; it's observed that mathematical model 3 yields better results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.218-226
• /
• 1998

Recent trends and the effect of mechanical vibrations in optical disk drives are reviewed in this paper. The Nation from CD drives to high density DVD drives and the development of writable optical disk drives require tighter mechanical tolerance. The demand for faster access time and higher data transfer rate also leads to critical mechanical problems to limit the tracking and focusing servo performance. The current mechanical issues to limit the performance of the drives and various technologies to overcome the mechanical problems are introduced. Vibrations of disk-spindle system, actuator and suspension designs of the optical pick-up, and general mechanical designs for the fast and stable access mechanism are considered.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1983-1988
• /
• 2015

This paper proposes the enhanced application of superconducting magnetic energy storage (SMES) for the effective compensation of power fluctuations based on the interleaving technique. With increases in demand for renewable energy based photovoltaic (PV) generation system, the output power fluctuations from PV generation system due to sudden changes in environmental conditions can cause serious problems such as grid voltage and frequency variations. To solve this problem, the SMES system is applied with its superior characteristics with respect to high power density, fast response for charge and discharge operations, system efficiency, etc. In particular, the compensation capability is effectively improved by the proposed interleaving technique based on its parallel structure. The dynamic performance of the system designed using the proposed method is evaluated with several case studies through time-domain simulations.

• Journal of Labour Economics
• /
• v.25 no.1
• /
• pp.23-45
• /
• 2002

The main findings from the analysis of the micro-determinants of joining union are : Firstly, joining union is mainly determined by union reach (supply-side) rather than by union propensity (demand-side). Secondly, union existence is closely correlated with firm size. Thirdly, job satifaction is not statistically significant with joining union, though it is significant with non-union workers' propensity to join union. Finally, trade union movement is required to extend union reach and emphasize institutional and behavioral factors for increasing union density.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.5
• /
• pp.43-51
• /
• 2011

Irrigation facilities are spread over demand area in a low density and exposed in the field requiring efficient operation and maintenance. Thus, it could be more efficient to manage an irrigation system when it is with wireless sensor network (WSN) using RFID (Radio Frequency Identification) application. A WSN, a kind of ubiquitous sensor network composed of wireless network, RFID and database management system was developed for agricultural water management in terms of operational status and maintenance requirements. Identification code for RFID tag was designed and an application for RFID reader was developed for field data collection, and a database management system was constructed for managing irrigation facility attributes. The system was installed in I-dong irrigation districts in Gyounggi-province, Korea and the operated results showed the applicability of the WSN for agricultural water management.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.272-274
• /
• 2011

최근 들어 케이블 방송망을 기반으로 한 디지털 방송, VoIP(Voice over Internet Protocol), VOD(Video on Demand), 영상전화, 이동전화, 무선 랜 로밍 등의 다양한 멀티미디어 서비스의 출현과 향후 도입될 새로운 융합형 멀티미디어 서비스의 수용을 위해 케이블 망의 고도화에 대한 요구가 제기되었다. 특히 유럽을 중심으로 이러한 요구를 만족시키기 위해 DVB(Digital Video Broadcasting)-C2 규격의 개발이 진행되었다. DVB-C2 규격에서는 기존의 게이블 전송 규격인 DVB-C에 대해 30% 이상의 전송 효율을 높이고자 새로운 변조 방식과 채널 오류정정 부호 방식을 도입하였다. 이에 본 논문은 본 논문에서는 DVB-C2 규격에서 도입된 채널 오류정정 부호인 BCH(Bose, Chaudhuri, and Hocquenghem) 부호와 LDPC(Low Density Parity Check) 부호의 연접 방식에 대한 성능을 검증하고자 한다. 이를 위해 개발된 시뮬레이터의 소개와 이를 통한 시험결과를 제시한다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.7-11
• /
• 2008

This paper describes design procedure and control strategy of HDC(High side DC/DC Converter) and MCU(Motor Control Unit) for diesel hybrid electric vehicle. In designing HDC and MCU for HEV high power density and reliability is strongly needed to meet the demand of automotive industry. In order to achieve the high performance of a controller, MPC5554 based control board is developed. An optimized film capacitor and inductor are also developed for high efficiency driving. Skim 63 IGBT module of SEMIKRON for automotive is used for power switching device. The most efficient cooling model for optimal size and reliability were verified by simulation. These procedures are verified by bench or driving test and the results are present in this paper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.3
• /
• pp.64-74
• /
• 2014

We show how a supplier can peg cost measures to the reliability of his time guarantees via the penalty costs considered in the framework. The framework also enables us to study the connections between the logistics network and the market. In this context, we show that even when the market base increases significantly, the supplier can still use the logistics network designed to satisfy lower demand density, with only a marginal reduction in profit. Finally we show how the framework is useful to evaluate and compare various logistics system improvement strategies. The supplier can then easily choose the improvement strategy that increases his profit with the minimal increase in his logistics costs.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.100-107
• /
• 1998

This paper describes fluxless soldering of reflow soldering process using solder foil instead of solder pastes. There is an increasing demand for the reliable solder connection in the recent high density microelectronic components technologies. And also, it is problem fracture of an Ozone layer due to freon as which is used to removal of remained flux on the substrate. This paper discussed joining phenomena, boudability and joining processes of microelectronics devices, such as between outer lead of VLSI package and copper pad on a substrate without flux. The shear strength of joints is 8 to 13 N using Sn/Pb (63/37 wt.%) solder foil with optimum joining conditions, meanwhile, in case of using Sn/In (52/48 wt.%) solder foil, it is possible to bond with low heating temperature of 550 K, and accomplish to high bonding strength of 25N in condition heating temperature of 650K. Finally, this paper experimentally shows fluxless soldering using solder foil, and accomplishes key technology of microsoldering processes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.865-869
• /
• 1997

In recent years, there has been increasing demand of ultra-fine grain graded cemented tungsten carbide material with high hardness and toughness which is used as high speed cutting tool for development in semiconductor, electronics and die/mold industry, which bring into limelight high-precision, high-efficient machining of sculptured surfaces. This paper deals with the performance of variation in the ultra-fine grain graded cemented tungsten carbide material such as grain size, hardness and density varied according to the volume of added elements, Co or TaC, and he changing of mixing, sintering process. Also, the performance of developing material with uniformed grain size of 0.5${\mu}{\textrm}{m}$ is compared with other domestics' & foreign companies' with analyzing and cutting performance testing.