• 제목/요약/키워드: demand curve

검색결과 244건 처리시간 0.025초

프리스트레스트 콘크리트 보를 위한 변형률 기반 전단강도 모델 (Strain-Based Shear Strength Model for Prestressed Concrete Beams)

  • 강순필;박홍근
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.197-200
    • /
    • 2008
  • 이전 연구에서 제안된 변형률 기반 전단강도모델을 휨-압축 부재에 적용하여, 프리스트레스트 콘크리트 보의 전단강도를 예측하기 위한 해석모델을 제안하였다. 전단보강 되지 않은 콘크리트 휨-압축 부재에서는 균열발생 이후, 일반적으로 인장대보다 콘크리트 압축대가 주로 전단력에 저항한다. 압축대 콘크리트의 전단성능은 콘크리트의 재료 파괴기준을 통해 정의된다. 그리고 압축대의 전단성능은 단면에 작용하는 수직응력과의 상관관계를 고려하여, 주응력방향에 의해 결정되는 파괴면을 따라서 산정된다. 압축대의 수직응력 분포는 부재의 휨변형에 따라 변화하므로, 압축대 단면의 전단성능은 휨변형에 대한 함수이다. 부재의 전단강도는 전단 성능 곡선과 수요 곡선의 교점에서 결정된다. 제안된 해석모델을 기존 연구자들의 실험 연구 결과와 비교한 결과, 실험체의 전단강도를 정확하게 예측하였다.

  • PDF

지반특성을 고려한 FCM 교량의 지진취약도 분석 (Seismic Fragility Analysis of a FCM Bridge Considering Soil Properties)

  • 김재천;변지석;신수봉
    • 한국지진공학회논문집
    • /
    • 제12권3호
    • /
    • pp.37-44
    • /
    • 2008
  • 본 연구에서는 확률적 지진취약도 분석방법을 3경간 FCM 교량에 적용하여 지반특성에 따른 지진취약 교각의 위치와 교각 상 하부에서의 소성힌지 발생 상태를 수치예제 결과의 분석을 통해 평가하였다. 이를 위해, 취약도 곡선을 최대지반가속도(PGA)의 변수에 대한 대수정규분포 함수로 가정하고 대수정규분포 함수의 주요 계수인 중앙값과 대수표준편차는 최우도추정법(Maximum Likelihood Method)으로 구하였다. 또한 지점별 상이한 지반특성은 "도로교표준시방서"에 제시되어 있는 지반의 등가 스프링을 사용하여 해석모델에 반영하였으며, 지진취약도 분석에 필요한 구조물의 손상지수로 교각의 소성힌지에서의 회전연성도를 이용하였다.

종곡선과 평면곡선의 경합조건별 차량주행안전성 및 승차감 평가 (Evaluation of Running Safety and Ride Comfort for High Speed Train in Cases of Superimposition of Vertical and Horizontal Curves)

  • 엄주환;최일윤;김만철
    • 한국철도학회논문집
    • /
    • 제16권4호
    • /
    • pp.311-317
    • /
    • 2013
  • 철도선형에서 종곡선과 평면선형의 경합은 차량의 주행안정성 뿐만 아니라 건설비에도 많은 영향을 끼칠 수 있다. 본 연구에서는 종곡선과 평면곡선의 다양한 경합조건별 차량의 주행안전성 및 승차감에 미치는 영향을 분석하였다. 그 결과 종곡선과 평면원곡선의 경합 뿐만 아니라 종곡선의 완화곡선상 경합, 그리고 완화곡선-원곡선 연결부상의 경합에서도 차량의 주행안전, 승차감 및 궤도작용력 기준을 모두 만족하는 것으로 나타남을 알 수 있었다.

An Analysis of Macro Aspects Caused by Protectionism in Korea

  • Kim, Yuri;Kim, Kyunghun
    • Journal of Korea Trade
    • /
    • 제25권1호
    • /
    • pp.1-17
    • /
    • 2021
  • Purpose - The global trend of protectionism has expanded since the onset of US President Donald Trump's administration in 2017. This global phenomenon has led to a significant reduction in world trade volume and a negative impact on economic development in some countries where the external sector accounts for a large proportion of GDP. Although Korea is a country vulnerable to this deteriorating trade environment, few studies have examined the relationship between protectionism and its business cycles based on Korean data. Thus, this paper investigates the impact of protectionism on Korea's business cycle. Design/methodology - To identify future implications, we conduct a structural vector autoregression (VAR) analysis using monthly Korean data from 1994 to 2015. Macroeconomic variables in the model include the industrial production index, inflation rates, exports (or net exports), interest rates, and exchange rates. For the identification of the shock reflecting the expansion of protectionism, we use an antidumping investigation (ADI) data. Since ADIs are followed generally by the imposition of antidumping tariffs, they have no contemporaneous impact on tariffs and are also contemporaneously exogenous to other endogenous variables in the VAR model. We examine two kinds of ADI shocks i) shocks on Korean exports imposed by Korea's trading partners (ADI-imposed shocks) and ii) shocks on imports imposed by the Korean government (ADI-imposing shocks). Findings - We find that Korea's exports decline sharply due to ADI-imposed shocks; the lowest point at the third month after the initial shock; and do not recover until 24 months later. Simultaneously, the inflation rate decreases. Therefore, the ADI-imposed shock can be regarded as a negative shock on the demand curve where both production and price decrease. In contrast, the ADI-imposing shock generates a different response. The net exports decline, but the inflation rate increases. These can be seen as standard responses with respect to the negative shock on the supply curve. Originality/value - We shed light on the relationship between protectionism and Korea's economic fluctuations, which is rarely addressed in previous studies. We also consider the effects of both protective policy measures on imports to Korea imposed by the Korean government and on policy measures imposed by Korea's trading partner countries on its exports.

Simulation of the fracture of heterogeneous rock masses based on the enriched numerical manifold method

  • Yuan Wang;Xinyu Liu;Lingfeng Zhou;Qi Dong
    • Geomechanics and Engineering
    • /
    • 제34권6호
    • /
    • pp.683-696
    • /
    • 2023
  • The destruction and fracture of rock masses are crucial components in engineering and there is an increasing demand for the study of the influence of rock mass heterogeneity on the safety of engineering projects. The numerical manifold method (NMM) has a unified solution format for continuous and discontinuous problems. In most NMM studies, material homogeneity has been assumed and despite this simplification, fracture mechanics remain complex and simulations are inefficient because of the complicated topology updating operations that are needed after crack propagation. These operations become computationally expensive especially in the cases of heterogeneous materials. In this study, a heterogeneous model algorithm based on stochastic theory was developed and introduced into the NMM. A new fracture algorithm was developed to simulate the rupture zone. The algorithm was validated for the examples of the four-point shear beam and semi-circular bend. Results show that the algorithm can efficiently simulate the rupture zone of heterogeneous rock masses. Heterogeneity has a powerful effect on the macroscopic failure characteristics and uniaxial compressive strength of rock masses. The peak strength of homogeneous material (with heterogeneity or standard deviation of 0) is 2.4 times that of heterogeneous material (with heterogeneity of 11.0). Moreover, the local distribution of parameter values can affect the configuration of rupture zones in rock masses. The local distribution also influences the peak value on the stress-strain curve and the residual strength. The post-peak stress-strain curve envelope from 60 random calculations can be used as an estimate of the strength of engineering rock masses.

한국공업화과정(韓國工業化過程)에서의 광물자원(鑛物資源)의 수급구조변화(需給構造變化)와 경제성장(經濟成長)에 있어서의 역할(役割) (The Changing Patterns of Demand-Supply and Role of Mineral Resources in Economic Growth during Industrialization of the Republic of Korea)

  • 윤석규
    • 자원환경지질
    • /
    • 제18권1호
    • /
    • pp.65-92
    • /
    • 1985
  • A total of 12 mineral commodities significant in domestic output, economy and/or strategy of the Republic of Korea are chosen to examine the structural changes in production and demand-supply of these minerals during the last two decades of her industrialization. These include iron and manganese ores as the raw materials for iron and steel making, copper, zinc and tungsten ores among other non-ferrous metallic minerals, limestone (cement), kaolin, talc, pyrophyllite and graphite among other non-metallic minerals, and anthracite coal as the only domestic source of fossil energy. These are reviewed historically in time-series based on the statistical data which are tabulated and graphed in terms of domestic output, export, import, apparent demand-supply, its increasing rate, and self-sufficiency rate of each commodity. The increasing rates of demand-supply (IRDS) of some more important commodities are compared with those of Gross Domestic Production (GDP) and Economic Growth Rate (EGR) to evaluate how the IRDS contributed to the GDP and EGR. The major results revealed are as follows: Among the 12 commodities, the domestic output of 8 commodities appeared to have grown with steady upward trends: they are ores of lead, zinc and tungsten, limestone (cement), kaolin, talc, pyrophyllite and anthracite coal. Two commodities, ores of iron and copper, continued with unchanging or slightly declining trends and varied fluctuations, in spite of their cardinal importance to the heavy industry and strategy of Korea. The remaining two, graphite and manganese ore, have gradualy declined in domestic output in which the former has still enough resource potential but the latter has not and virtually ceased its domestic output. Trade patterns for mineral commodities in the Republic of Korea during the last two decades have changed greatly, being marked by a shift from mineral-exporting to mineral importing, mainly because of increasing consumption of mineral raw materials for industrialization rather than beceuse of decreasing output of domestic mineral commodities in quantity. In terms of trade patterns, the 12 commodities concerned in this study can be classified into the following four groups. The 1st group - ores of lead and tungsten have only been exported without imports. The 2nd group - amorphous graphite, and pyrophyllite have mainly been exported but partly been imported. The 3rd group - kaolin, talc and crystalline graphite have equally been exported and imported, but quantity of imports have rapidly been increased with time. The 4th group - ores of iron, manganese and zinc have shifted from exports to imports during the industrialization, particularly owing to the initiation of iron and steel making by the Pohang Iron and Steel Company in the middle 1970' s and the new establishment of the Onsan Zinc Refinery in the late 1970' s. All of the 12 commodities under considerations were far above 100% in self-sufficiency rate before or in the early 1960' s. Recently, however, most of them have been declined to below 100% except for those of limestone (cement) and pyrophyllite. It is particularly serious to identify that the self-sufficiency rates of the three important metallic minerals, iron, copper and manganese ores in 1982 appeared to be 5.1%, 0.5%, and 0.01%, respectively. The average self-sufficiency rate of the total domestic minerals produced in 1982 was 14.4% (in value) for that year. Mining industry appeared to be extremely high in its intermediate demand rate whereas its intermediate input rate to be quite low indicating that mineral raw materials have been exerted strong forward linkage effects upon the other industries rather than backward linkage effects. In comparing the curves of increasing rates of demand-supply of several major minerals - iron ore, manganese ore, copper ore, limestone (cement), kaolin, and anthracite coal - with those of Gross Domestic Production and Economic Growth Rate drawn on every graph, it is clearly shown that the curves of increasing rates of demand-supply comprise around 6 to 7 periods of cycles which roughly harmonious with those of the curves of GDP and EGR, except for the curve of anthracite coal of which the configuration seems to have resulted from the (artificial) government's mineral policy rather than from economic free market mechanism. The harmonic feature of these curves well suggests that the increasing rates of demand-supply of major minerals have been significantly contributed to the GDP and EGR. In addition, the wider amplitudes of the iron, manganese and copper curves than those of the limestone (cement) and kaolin curves indicate that the contribution of the former, metallic commodities, has been greater than that of the latter, non-metallic commodities.

  • PDF

Shared Vision 모형을 이용한 용수수급의 안정성 분석 (Water Demand and Supply Stability Analysis Using Shared Vision Model)

  • 정상만;이주헌;안중근
    • 한국수자원학회논문집
    • /
    • 제37권7호
    • /
    • pp.569-579
    • /
    • 2004
  • 최근 들어 지구온난화와 기상조건의 변화로 기후의 변동폭이 증가하면서 극심한 가물이 자주 발생하고 있다. 또한 기 개발된 용수원의 수질 오염, 물 분배에 관한 상류지역의 반대 및 지방자치단체간의 수리권 문제 등도 상류지역으로부터의 맑은 수자원 확보를 필요하게 만드는 요인이다. 따라서 이에 대한 용수공급 관리 방안의 필요성에 대한 인식이 부각되고 있으며, 수도권의 용수수요 변화에 대한 북한강 유역 댐의 용수공급 능력에 대한 적절한 검토가 필요한 실정이다. 본 연구에서는 북한강 유역 댐의 용수공급 가능성을 파악하고 적절한 용수 공급방안을 제시하기 위하여 shared vision 모형인 스텔라 소프트웨어를 이용한 모의 운영시스템을 개발하였다. 또한 이 모형에서는 수위에 따른 평균의 최소, 중간, 최대의 조건으로 3가지 Rule을 정하여 저수지의 운영곡선의 변화와 발전방류에 따른 안전 공급율 변화를 분석하였다.

An Analytical Investigation for Nash Equilibriums of Generation Markets

  • Kim Jin-Ho;Won Jong-Ryul;Park Jong-Bae
    • KIEE International Transactions on Power Engineering
    • /
    • 제5A권1호
    • /
    • pp.85-92
    • /
    • 2005
  • In this paper, Nash equilibriums of generation markets are investigated using a game theory application for simplified competitive electricity markets. We analyze the characteristics of equilibrium states in N-company spot markets modeled by uniform pricing auctions and propose a new method for obtaining Nash equilibriums of the auction. We assume that spot markets are operated as uniform pricing auctions and that each generation company submits its bids into the auction in the form of a seal-bid. Depending on the bids of generation companies, market demands are allocated to each company accordingly. The uniform pricing auction in this analysis can be formulated as a non-cooperative and static game in which generation companies correspond to players of the game. The coefficient of the bidding function of company-n is the strategy of player-n (company-n) and the payoff of player-n is defined as its profit from the uniform price auction. The solution of this game can be obtained using the concept of the non-cooperative equilibrium originating from the Nash idea. Based on the so called residual demand curve, we can derive the best response function of each generation company in the uniform pricing auction with N companies, analytically. Finally, we present an efficient means to obtain all the possible equilibrium set pairs and to examine their feasibilities as Nash equilibriums. A simple numerical example with three generation companies is demonstrated to illustrate the basic idea of the proposed methodology. From this, we can see the applicability of the proposed method to the real-world problem, even though further future analysis is required.

변동성 재생e 유연 대응을 위한 한국형 V2G 기술개발 (Korean V2G Technology Development for Flexible Response to Variable Renewable Energy)

  • 손찬;유승덕;임유석;박기준
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제7권2호
    • /
    • pp.329-333
    • /
    • 2021
  • V2G (Vehicle to Grid) technology for an EV (Electric Vehicle) has been assumed as so promising in a near future for its useful energy resource concept but still yet to be developed around the world for specific service purposes through various R&BD projects. Basically, V2G returns power stored in vehicle at a cheaper or unused time to the grid at more expensive or highly peaked time, and is accordingly supposed to provide such roles like peak shaving or load levelling according to customer load curve, frequency regulation or ancillary reserves, and balancing power fluctuation to grid from the weather-sensitive renewable sources like wind or solar generations. However, it has recently been debated over its prominent usage as diffusing EVs and the required charging/discharging infrastructure, partially for its addition of EV ownership costs with more frequent charging/discharging events and user inconvenience with a relative long-time participation in the previously engaged V2G program. This study suggests that a Korean DR (Demand Response) service integrated V2G system especially based upon a dynamic charge/pause/discharge scheme newly proposed to ISO/IEC 15118 rev. 2 can deal with these concerns with more profitable business model, while fully making up for the additional component (ex. battery) and service costs. It also indicates that the optimum economic, environmental, and grid impacts can be simulated for this V2G-DR service particularly designed for EV aggregators (V2G service providers) by proposing a specific V2G engagement program for the mediated DR service providers and the distributed EV owners.

고장력강 용접부에 대한 내구수명 예측 방법 연구 (Study on Fatigue Characteristics of High-Strength Steel Welds)

  • 장홍석;유승원;박종찬
    • 대한기계학회논문집A
    • /
    • 제39권3호
    • /
    • pp.319-325
    • /
    • 2015
  • 차량 경량화가 진행되고 있는 요즈음 상용차의 프레임이나 데크를 일반강에서 고장력강으로 대체하고 있는 상황이다. 일반강의 용접부 내구 특성에 대한 연구는 지금까지 많이 이루어졌으나 고장력강 용접부에 대한 연구는 거의 진행되지 않았다. 본 연구에선 첫째, 상용차량에 적합한 용접부 내구를 예측 기법을 찾기 위해 다수의 접근법을 검토해 보았으며 노치계수 접근법인 Radaj 방법을 선택하였다. 둘째, 오버랩 조인트와 T 조인트 용접시편을 이용한 내구시험을 통해서 F-N 선도를 얻었으며, 이 값을 활용하여 HARDOX, ATOS60 재질에 대한 S-N 선도를 추출할 수 있었다. 셋째, 노치계수 접근법을 사용하여 시편 시험으로 얻어진 F-N 선도를 활용하여 고장력강 용접부의 일반적인 S-N 선도를 구할 수 있었다. 넷째, 연구를 통해 얻어진 고장력강 용접부의 내구특성을 상용내구해석 프로그램에 적용하였다. 마지막으로 해석사례를 통해 시험과 해석결과를 비교하였으며, 신뢰할만한 결과를 얻을 수 있었다.